Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Nov 3, 2011
The all new light weight "RC Logger PRO" combines data and image capturing into one device allowing synchronized telemetry data and high density imaging collection during flight. The integrated data bus connects up to eight sensor modules (optional available) in series allowing to capture precise GPS data, temperature probes or current flow, system voltage, atmospheric pressure and altitude, humidity, single cell status, motor rpm and other telemetry data. Please refer to the product page for currently available and future available add-on modules. The RC Logger PRO can be triggered manually or automatic, in both recording modes (video & still image) allowing to assign a free RX channel to connect to the RC Logger PRO directly. Minimum photo trigger interval is 1 second. The trigger interval can be set by the user via the powerful RC Logger Viewer PC software. If the included trigger cable is connected the RC Logger PRO will be powered by the RC -helicopters / -airplanes / -cars on-board power system.
- All new FPV and OSD support! The RC Logger PRO offers full FPV and OSD support and provides video and audio signal output for 5.8 GHz high resolution video transmission. The RC Logger PRO allows various camera and image quality settings including exposure and white balance as well as auto mode. The user is able to select from different resolution and quality modes to optimize the video-/photo recording and data logging based on the specific needs and environmental conditions.
- All new recording without limits! 32 GB fast SD/SDHC card support for around the clock recording. Enjoy longer recording time limited only by the size of SD card used and available power (external power source supported). Single video files now support 4 GB file size. If video is recorded beyond 4 GB video files will be split in multiple files automatically.
- Get a wider view of your life! A lens mounting ring is pre-installed allowing to attach RC Logger's smart lens system including a fish eye-, telephoto conversion- and wide angle lens for stunning video- and photo- recordings.
- Synchronize your motion! The RC Logger HD/PRO uniquely synchronizes video- and still image- recording with all recorded telemetry data. The powerful RC Logger Viewer PC software allows viewing the collected data in perfect sync. View your world in 3D with Google Earth plug-in support.
Features: * External sensor I2C data bus (connect up to 8 external sensor modules) * Move-able camera head with lens fixing screw and metal horn to control head by servo * Support for additional lenses (optional available lenses) * A/V Out signal for FPV and OSD support * Status LED * Power LED * Trigger/Power PWM input (trigger automatically or by receiver/transmitter) * HD video quality (1280 x 720 pixel) * 5 Mega pixel photo (2592 x 1944 pixel) * Video- and photo- rotation (0 to 180 degree) * Serial photo mode (minimum 1 second interval) * White balance support for various modes (day, night, indoor, outdoor, auto, etc.) * microUSB 2.0 data/charging port * SD/SDHC card slot (max. 32 GB) * IR remote control supported (requires A/V Kit) * Upgradeable firmware via SD card * Device driver for Windows 2000/XP/Vista/Windows 7 (64 bit currently not supported)
Specs: Video resolution: 1280 x 720 pixel (HD) Image resolution: 2592 x 1944 pixel (5 mega pixel) Video format: AVI Picture format: JPG Frame rate: 30 fps Viewing angle: 56 degrees Rotation angle: 90 degrees Rechargeable battery: 950 mAh Li (replaceable; with connector) External ports: I2C, Power & Trigger; A/V Out, USB Control options: Buttons, IR remote control, PWM pin from receiver Storage: SD/SDHC (max. 32 GB)
Electrical Specifications: Battery operation time (no external sensor): min. 1 hour RX power supply voltage: 4.8 to 6.2 V/DC RX power supply current: max. 450 mA Voltage supply to external sensor: 3.6 to 6 V/DC Current supply to external sensor: max. 600 mA (using internal battery)
Physical Specifications: Dimensions (W x H x D): 98 x 48 x 24 mm Weight: 77 g
Includes: * RC Logger PRO * 4 GB SDHC card * ABS mounting bracket * Metal servo connection horn * 2x hook & loop fastener tape * Lens mounting ring for optional lens (pre-installed) * Receiver Trigger Cable (for power and/or triggering from RX) * microUSB cable (to connect the RC Logger PRO to the PC) * PC software CD (RC Logger Viewer) * Operating instructions