 What's up everyone takedown here welcome back to another video today I'm gonna be sharing with you an easy fix for your Gameboy advanced SP and that is if you are having a problem with it charging and it won't charge properly This is an easy fix and it honestly should not take too much time now I am going to be showing you guys in this video how to replace the battery But before you go and replace the battery, I recommend replacing your charging cable I've received a bunch of these from clients claiming that there is a problem with their Gameboy advanced SP and it's not charging properly Turns out to not be a problem with the actual console or the battery a lot of the time It has been a problem with the charging cable So I've just went ahead and replaced that for them and they never had any other issues If you have an original one the wire inside and sometimes other components of the charger can become frayed and damaged Without visibly noticing that so I do recommend it the first thing you're doing If you're having a problem with your Gameboy advanced SP charging is to simply replace the charger That is the least expensive you can get it off of Amazon and eBay for almost next to nothing I think under $10 now if you're still experiencing the problem and you've already tried a new cable That's when you're gonna go and gets a new replacement battery again You can get this off of Amazon or eBay and I believe it is under $10 and And to do that all you're gonna need is a Phillips head screwdriver Now the smallest bit you can find for this here because it is just going into the battery components You only need to get a Phillips head You don't need to get the Nintendo tri-wing because you're only accessing this screw here that covers the battery and It is the Phillips head so you're gonna go and remove that so now the screw itself isn't gonna come all the way Out you just loosening it so you can take the whole panel off Just like that and here's the battery here So with the game ports facing the top the battery here You're gonna push it this way and then you're gonna pry it out with your nail. So you're gonna push and pry it right out Push it off to the side and then you're gonna take the new replacement battery with the ends You're gonna put it in the same way you're gonna push down and then you're gonna push it Back in the opposite direction to be able to put it in place And now it's just a matter of putting the cover back on and putting the screw back in to hold it in place Now a lot of time before testing to make sure that this did work and turning it on I do recommend charging the Game board advanced SP for a while because a lot of the time the batteries that you receive are gonna have No to little charge in them So you do want to charge it up first before testing to make sure that it did work Now I will show you what I mean here if I open this up here chances are when I turned it on This light here is going to go red, which means it's not fully charged those turn on and At least this one here it is staying red So this is what battery here. I did receive does have somewhat of a little charge in its however Yours might not it might either a not even turn up at all after you replace the battery or B It might come up red here meaning it does need to be charged now if you were experiencing a problem with yours Whereas you weren't able to turn it on at all and you replace the battery And you are able to get to the screen or at least after you charge it get it to the screen Then you know that it was an issue with the old battery that you did have and it was a good thing that you Did replace it because now you can play your gameboy advanced sp and not have a problem with it But I hope you guys have enjoyed this video of an easy fix how to fix your gameboy advanced sp If it is not charging properly most of the time it is the charging cable But sometimes it is the battery itself that does need to be replaced So hope you guys enjoyed the video. I'll see you guys in the next one. Please take care. Peace