 Γεια σας! Είμαι Βικη, και καλύτερα για το τρίτο μέρος μου, φτιάχνω αυριέλ στάμπες. Σήμερα θα χρησιμοποιήσω αυτή η καλύτερη στάμψεση, η οποία είναι η Ρετρο-ορναμεντζης. Υπάρχουν όλες τις στάμψεσης για αυτή η στάμψεση. Είναι καλύτερη της καλύτερης ορναμεντζης, στις τρεις βραντζες, μικρές στάρες, ένα πόδι και πολλές more little elements to create your lovely scene. Και εγώ πιστεύω ότι όσοι είναι οι ρετρο-ορναμεντζές θα είναι καλύτερη για να πιστεύουν με τα πατάντα με κομμάτια. Με αυτά τα κομμάτια που βρίσκαμε από την Τυμ Holtz. Έτσι, εγώ έγιναν έναν πόδι και θα δημιουργήσω μία καλύτερη στάμψεση από αυτή τη στάμψεση στάμψεσης. Λοιπόν, θα χρησιμοποιήσω και να φάσω να είναι έναν καλύτερη στάμψεση που είναι 4.25 x 5.5. Έτσι, εγώ έγιναν να δημιουργήσω με το ρετρο-ορναμεντζές, ως my focal point, που θα εγγιναντάω 4 φορές με βερσα-μαρκίνγ. Και επίσης όλοι είναι ρετρο-ορναμεντζές, δεν θα χρησιμοποιήσω μικρή στάμψεση πόδια, αλλά βανίλα εγώ. Λοιπόν, αυτό είναι βανίλα κόλλορδο, θα χρησιμοποιήσω μία καλύτερη στάμψεση. Και θα εγγινανώ και να εγγινανώ 2 φορές με το ρετρο-ορναμεντζή. Τώρα, η ιδέα είναι να χρησιμοποιήσω 2 φορές με το ρετρο-ορναμεντζές. Και μόνο να δώθω περισσότερα, θα την εγγίναν στην ρε Breathe & Green, γιατί θα κάνω κάποια ασύσταση με το ρετρο-ορναμεντζές. Σήνω psi, θα μιλάω πόση να το δώθω με το ρετρο-ορναμεντζή. Εδώ θα δώθεις γιατί θα ρω την ασύσταση με 2 φορές με το ρετρο-ορναμεντζή. ή μπορείς να μιλήσεις και χωρίζεις your ornaments as long as you end up with two identical ones. So now I'm going to use the dye that was included in the set and I'm going to cut the red ones. I'm using my Cisix machine and I had to pass it twice since there is only one dye for the round ornament. So now I have both my ornaments there and just to make them more interesting I'm just going to cut out with my scissors the inside of the ornaments out of the green patent paper. I will use some tape adhesive at the back of the green patent paper and I'm going to stick on top of the ornament and I'm going to repeat the same process for both those ornaments so I end up with two identical ones. Now as I'm doing that just to remind you that there is a full list of all the supplies that I'm using today just below the video in the description area as well as on my blog also there are two giveaways running on my blog right now one is for one Averiel stamp set and the other one is for the Oktoberkarkit by Simon's stamp so make sure to visit my blog and enter your details if you haven't done so already. I am also adding some glitter with my clear wing of Stella glitter pen because ornaments just have to be shiny and you can see that I can stick them back to back and they match perfectly. Now I need to find a round die that fits those ornaments so this is the one I'm going to use to create the window for my spinner card. I have cut out this beautiful patent paper by Tim Holtz to be slightly smaller than my standard card and I'm going to secure it with some repositional tape on top of my card base Notice that I haven't stick down the paper now I'm going to place the die on top and I'm going to pass it through my CISIX machine so with one pass I am going to cut out both the patent paper and my card base. Also notice that I have opened up my card base so I am cutting only a hole on the front panel of the card base I'm going to show you what I mean here I'm going to remove the die and you can see that I can separate the paper from the card base and now I have to stick those ornaments back to back to do so I am going to use my Xyron machine and this is going to turn them into stickers but if you don't have this you can always use your tape adhesive at the back and in any case just make sure that you use some strong adhesive so that they stack together nicely. If you are using your Xyron machine make sure to go all around it with your bone folder just to make sure that all that glue is separated and now I can peel off my ornaments they are nice and sticky at the back now to create your spinner card you will need some type of thread I am using this golden thread just because it's about Christmas and I think a touch of gold in this retro colored card is going to look perfect so I'm sticking it at the back and I'm going to cover it up with the other ornament so I have sandwiched the thread inside from top to bottom and this is going to spin all around in my card now all I have to do now is to add some tape adhesive at the back of my panel I'm going to make sure that I go all over the outside as well as the inside around the hole there and now I'm going to stick down the ornament at the center of the hole also make sure that the hole that you have opened on your panel and your card base is big enough for your ornament to spin around easily and also just to make sure that everything is nicely secured there I am adding an extra piece of tape I am using my scissors to cut off the excess thread and now I am ready to stick that panel directly on top of my card base now I'm making sure that I match those holes perfectly I have used those dies one inside the other to create this ring this comes from the same patent paper collection as the rest of the papers and I am going to stick that around the hole that I have on my card I think that this is going to help that ornament pop even more against the background and now to embellish my card even more I am going to use this patent paper and I'm going to stamp on top one of the branches that is available in the stamp set I am going to show you which one it is I'm going to stamp it with Versa marking and I am going to apply some green embossing powder the embossing powder that I'm using is by wow and I think that that color matches perfectly the card you can also just stamp with any green ink pad that you have if you don't have green embossing powder in the stamp set there is also an adorable bow which I am going to use to embellish my card too so I am going to stamp that on top of a red patent paper I'm just browsing through those papers to just a tiny little spot to stamp the bow I am going to white emboss it this time so that it's more visible once I have applied the embossing powder and cut it out now for both the branches and the bow I am going to use the matching dies that are available in the set to cut everything out so I have all my die cuts ready to go now I'm going to use some foam tape at the back of the branches to help them pop a little bit more and that's ginger who decided that those branches were really interesting so anyway I am going to add those foam tapes at the back and I'm going to stick them on top of my ornament and this way I'm going to create a nice little cluster at the top with the two branches and the bow just make sure that as you stick those down you don't block the spinning of the ornament and now my main card is pretty much finished all that's left to do is to add the sentiment I chose one of the sentiments and I embossed it at the very bottom of my card I used the same vanilla embossing powder that I did use on the ornament now I'm going to show you a nice trick to make a great surprise before you put it inside the envelope just make sure that you spin it many many times hold it like that and place it inside the envelope once the recipient gets the card and opens the flap the ornament will start spinning and that was the card for today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me a thumbs up on my youtube channel don't forget to visit my blog and enter the giveaways and also visit me tomorrow for another card featuring avariel stumps and if you need more inspiration here are two more videos where I am featuring avariel stumps which are actually day one and day two from this week thank you all for watching