 last time we ran it wanting to shut down then finally it shut down didn't want to start so we're going to check the plug and it just kind of seems like it don't have much compression well it does now but let's just let's check the plug and see what it looks like and maybe it's fouled out so let's dig into this we got to get this running this just turns a quarter turn and that comes off spark plugs down in there as you can see so let's go ahead and take this filter out it's not the greatest but I can see light through it seems to be okay I mean I don't it's not not to the point where it's not gonna let something run besides I tried to start it without this on it wouldn't wouldn't start so okay that's the short plug and plug here let me go get a short plug so let's go ahead and pull this plug out let's see if it's fouled out looks a little dark but let's give it a pull well I don't have anything to ground it to I'm sure it's got spark here there's something else right down in here there is there's a nipple down in there like it's missing a line right there that would be four so there's no lines on it there's no lines broke off there's no missing lines I mean you know we're no missing spots where it should be coming off the carburetor so I am not sure what's going on there that's the problem here I can't just stick this plug in there and we'll see if we can get at the start this thing does not have a primer bulb it wasn't designed with one so I'm not sure what that that would be for I'm sure at all as is a choke choke it doesn't have a throttle lock little thing leaking the plug for it's leaking okay it's got plenty of gas in it that could just be a vent but I don't know why it would be wide open like that let me see hang on a second guys see out run it's out cuts right I need to sharpen the chain then I think it's going to be okay I think it was just a fouled out spark plug sometimes that's what causes that so see there you go we got that running might need a slight tweak in the carburetor yet but that could be because the chain is all the salt the chain is dull and it's only throwing out little chips so what we're gonna have to do is well what I'm gonna have to do is sharpen the chain I actually see a tooth missing off of it I may just put another chain on this thing it's worth it so that could have a lot to do with this is his old chain looks like someone's no it don't have a tooth missing alright but yeah I'm gonna go ahead and sharpen it I won't bring you along with that because that's kind of boring so that's what we'll do well I'll sharpen that up I'll let you know at a later date how it's doing there you go what much wrong with it I don't figure the leak on the bar oil was just the cap was was loose you got to really tighten it so that was the problem there so there you go guys just a quick howl just a quick little project so we got that going so now I can cut up stuff when it falls down I definitely need a saw when you got this many trees around here you definitely need a saw so all right guys thanks for watching it's breezy out here blue skies pretty clouds hotter in hell though Shea Bears I met the man alleged I'm gone for now don't forget to check out monkey 1000 channel BXX 32 we'll see you guys soon bye bye now gonna need to chain they're fairly reasonable might put a borrower on it too sometimes you can get a kit sharpen this chain 90% of the teeth were 30 degree angle about 10% was 25 degree angle so somebody's hit something with it at one time and never really put the edges back on it I could take the time and do that a lot of times it just easier to go buy a new chain so I'll probably get a chain for it and I like the chipper chains anyway just gotta be careful with them there's a lot kickback on them sometimes so little tweaking on the car man it'll be fine so thanks for watching guys