 So I wanted to mount and resin a picture of mine's the wheat. I clamp one edge of the print down, and I lift up the other end and I just spray, spray adhesive. I take the clamp off the other side and I do the same. And I put a piece of paper on top so that I don't get glue from the edges onto the brayer. Nice. And I trim all the edges of the print with an X-Acto knife. I raise the piece off the tail top, make sure it's nice and level. So it's just equal parts, resin and hardener. You can just eyeball it. You stir really well, about three minutes. Just make sure that, you know, you're being thorough, you scrape the edges. I love this stuff. It's like clear honey. You just pour it all over. So it self-levels. If you just have like a little spreader or something, you just push it around. The resin will fall off the edge, but that's what I wanted for this method. So when I just blow on the surface, I can see all the bubbles popping. It's awesome. Sometimes just to make sure I got them all, I just used a little kitchen flambé tart. I can just cover it up for the night. I will be back tomorrow to check it out. Perfect. Well, thanks for watching. And why don't you subscribe? We have so many projects coming up. See ya.