 Γεια σας, είμαι η Βυγκή, και καθώς ήρθατε σε έναν νέο αργένου λαϊκότητα. Το σχέδιο μου σήμερα έχει ένα βίνταξο, νομίζω και σχέδιο, και θα δοκινήσω με ένα προφέρσο στάμψετ από Τυμ Holtz. Αυτό είναι πολύ προσφαλείο και έχω δοκινήσει σε αυτό. Και τώρα είναι η στιγμή που θα χρησιμοποιήσω. Θα δοκινήσω με τα νομίζω και το αργένου. Και θα εξηγήσω σήμερα. Θα παίρνω με το σχέδιο μου σπραίστας, και θα μεταφυγήσω με το σχέδιο Όξι το οποίο μπορώ να δημιουργήσω με αυτό. Τώρα θα χρησιμοποιήσω το ίδιο φόρο που χρησιμοποιήσαω, σπίτι που χρησιμοποι Vale, που χρησιμοποιήσασα το βίνταξο και το ασχέδιο. Τώρα στον επόμενο τη εμπορία φωτο occupationς μου χρησιμοποιήσαω με το σχέδιο Τιμ Holtz. Πριν σήμερα θα μεταφύω να παίρνω με το σχέδιο, μεύ banget Υλιό που μπορώ να δεις καιεις αλλατές σχέδια. Τώρα θα αφήνω σε ένα πολύ μεγάλο σύστημα, αυτό was also designed by Tim Holtz και έχει όλα αυτά τα γέντες στον κομμάτι και θα αφήνω να τα κομμάσω, θα αφήνω να χρησιμοποιήσω ένα κραύτημα, αλλά δεν πρέπει να είναι καλύτερο θα αφήνω στον κομμάτι μου και δεν ξέρω ότι θα χρησιμοποιήσω το προφέσιο και πιστεύω ότι το προφέσιο θα πηγαίνει εκεί Ξεκίνησα αυτό, θα αποφασίσω όπου όλα αυτά τα γέντες θα πηγαίνουν Θα εγγραφώ στο σώμα μου, το κομμάτι της ραζόντας, είναι πολύ εύκολο να το χρησιμοποιήσω δεν είναι εύκολο ότι το κομμάτι δεν είναι εύκολο αλλά για να αφήνω γιατί, θέλω να κομμάσω το κομμάτι μου νερό και καλύτερο για εσένας Λοιπόν, είναι εύκολο για να μεταξύσω το κομμάτι της ραζόντας και να έχω ένα κομμάτι σύστημα Να, για το θεκίνησα όλα τα γέντες θα χρησιμοποιώ το κομμάτι μου και θα στηγηθύσω τις πιστεύωτος εξίγων για το ίδιο που θέλω να εγγραφώ στην πιστεύωση, θα το καταστήσω και τίποτα Λοιπόν, θεκίνησα στον αυτήωση αυτός θα μπορώ να την άπο Euros & Close το κομμάτι but i'm going to continue doing my voiceovers as if nothing is going on outside. Please let me know in the comments down below if the noise is too disturbing because then i will have to do the voiceovers during the evening when the builders aren't working. So anyway let's move on to the next phase and this is where i'm going to combine spray stain with oxide spray and you will see that both are going to work just fine together. First i decided to apply a little bit of moist. This is water in this bottle. This is going to help all the next sprays to blend better. So i'm starting with vintage photo and then i'm going to apply speckled egg and i can already see how different this color combo looks against the one that i did previously with the same colors but in ink pads. I'm adding even more water and i absolutely love how these colors blend together. I think that this is the perfect color combo for creating vintage backgrounds and i absolutely love how that speckled egg when it comes together with vintage photo it gives that almost greenish look. So i'm using my heat gun to make sure that everything is nice and dry and i'm also since i have a lot of water on top of my page i'm going to help that move even more by lifting the pages by sticking down the gears beforehand i do have some texture and interest on my background and by just using two colors i ended up having an instant background that i think is just gorgeous. Now i'm just going to add some finishing touches on my background these are techniques that i always like to do and i'm starting with stamping i'm using a black archival ink and the stamps that i'm playing with are from the professor stamp set notice how i avoid having a perfect stamping image i think that this adds more to the look that i'm going for and i'm also going to switch to another stamp now and go all around the borders notice that i'm not even using a stamping block this way i get imperfect stamping which is exactly what i'm going for i also like to have darker edges this is another technique, a go-to technique for me so i'm using black suit and i'm going all around with my blending tool darkening up the edges this is going to bring more the eye towards the center of my page and it looks more finished now all those gears are slightly raised i'm going over them with my blending tool without pressing at all so the ink stays only on top of the gear and this is going to help define them even more and they stand out better from the background however i don't want them to be super vibrant so i'm not overdoing that now it's time to add some splashes first i'm starting with water i'm going to leave that there for a few seconds to react with the ink underneath then i'm just going to blot it with my paper towel i'm also going to add some black splashes and these are going to be the finishing touch for my background i'm really happy with how it looks at the moment i'm going to leave it aside to dry and then i will start working on my focal point now my focal point is going to be the professor so i'm going to stamp him and i'm using my stamping platform this is quite of a big stamp and i need to get a good impression so i'm stamping that with black archival ink that's jet black and i'm working on mixed media paper now for his glasses i wanted to have some shine that's why i brought in my embossing glaze this is in speckled egg and it's going to match nicely with my background so i'm using my ranger embossing pen so this is going to apply some transparent ink only on the areas where i want to apply the embossing powder it's going to stick there and then i'm going to hit set it now remember that embossing glaze is transparent which means that it's going to add a shiny tint or anywhere you are going to emboss it but it's going to be transparent so if you do that over black you are going to end up with shiny black and here is my second mistake my black ink wasn't completely dry so i have powder all over the place now this second mistake is easy to fix i'm just going to use a clean brush and i'm just going to dust off any excess powder and i'm bringing in my heat gun here completely unaware of what is going to happen so i'm going to melt my embossing powder and remember this is clay so it is transparent and i end up having just black shine it looks great and it's perfectly usable however i was going for that speckled egg tint on his glasses that's why i'm going to show you how i fixed it all i'm going to do is to stamp his glasses one more time by using my VersaMark ink i'm going to apply my powder there and just cut out the parts that i want so that i can stick them on top of my glasses also notice that i did use my scissors to cut all around him without leaving any border at all and i did run a black marker all around the edges just to cover up any cut out mistakes and now i'm using my scissors and i'm going to cut out the glasses and these really add too much on the paint first of all they are the same color as the background so they match perfectly and at the same time they add shine on his glasses it is quite difficult to catch on camera but trust me it really makes a difference in real life now my professor is currently black and white but i want to add some color on him for that you can use watercolors you can use any other type of coloring medium you like i decided to go with my alcohol markers i'm not doing any crazy coloring just adding a little bit of color on his skin and i don't know how this idea came to me but for some reason when i was coloring him i had that idea to use fired brick to tint his clothes and i'm just using a post-it node to mask off his color making sure that this is going to stay nice and white and now to put everything together i'm going to add a little bit of vintage photo on him as well since i have that color on my background and since on my background i don't have at all that red color of fired brick i'm just going to use my dabber and go here and there with that color just to bring in that touch and at the same time it looks like rust so i think it matches nicely with the look that i was going for now i'm going to stick him down and i did use matte medium for that i have a little bit of a gap between the bottom of my page and where i stick him down and that's because i want it to be more towards the top so for that gap i'm going to fill it in with some washi tape but it doesn't look as if he is floating there i am combining a couple of washi tapes i had in my stash for ages and i like the black along with the one that has a tape measure on top so both of them have numbers and i think they match nicely with the rest of the page now i always like to add a washi tape in triangles so that's why i'm going to create two more clusters on my page so on the first cluster i'm going to go with a sticker that says trust your crazy ideas on the second cluster i went with another sticker that says never doubt your instinct and finally on the last one up top on the right corner i went with b original i am using my white gel pen to add some highlights on some of the gears not everywhere just a few here and there but this is going to help them stand out even more now i want to use this but it is quite thick i don't want to add too much bulk on my pages that's why i'm going to peel off the top it's really easy to do that and now i can stick it down and i'm really happy with how this layout came together i absolutely love the fact that although i used the same color combination just by using different mediums of the same colors i ended up with a completely different look now i'm going to stamp the date and i'm going to call this project done you can see here some close up photos i hope that you had fun today that you got inspired you will find links to everything i used down below in the description area thank you all so much for joining me today and i'll see you all next time