 Alright guys, this is going to be a fail video, I'm going to ask for help now. This is a Corbin Russ 1 LFIC that Jeff Moss very kindly sent me. I'll just show you with the key, there's control, okay, and there's operating. So it does function, I haven't broken it yet. Let me show you what my problem is. It's the same paper as the background. This is the operating key. High, low, high, low, high, high, okay. This is the control key. High, low, low, high, low, high. Now if I put these together, there's always differences, right? There should be. Put these together. This is the control key. So it has a low where the operating has a high. It has a high where the operating has a low, right, and another one there. But these two spots, right, this, so this is five and four are just killing me. Because they both will set. I can set both of them high. Of course that won't help me, right? So when I come in to get this one, not when I come in to get this one, I over set that, right? To get control, same deal with operating. I've tried just staring at the key, trying to pick either one. Pick to either position. And they just want to bind. So I'm picking to a hybrid control line which doesn't, or hybrid shear line which is completely useless. I've tried almost every pick I own. And I'm going to zoom in on the key way. I don't know how well you can see that, but I don't know how great the view is here. But I've got a ward here. That comes over. So to get under, it's nearly impossible to get under those low pins and then have enough angle to be able to rock to get the high pins. So I mean, even the Bogota is completely worthless. Even these little thin Euro picks are useless for this. So I don't know what I've got to do. But suggestions would be helpful. So anyway, fail. But valiant effort, I hope. I've spent over two hours turning this thing open on tape. So anyway, this is Alex. Thanks for watching. Have fun. Keep it legal. And if you've got any suggestions, please add it to the comments or PM me. Cheers. Thank you.