 Hey guys Shea Bear here today. We're going to try to hang this door See if we can get it put up, but there's a couple things we got to do first So stick around and I'll show you what we got to do Okay, so the original door that was on this house see this house didn't have any doors when she moved in none See it originally had three Three hinges on it this door has two and of course you can see they're backwards, so we got to take these off now They're not the right height either see this door It's sitting all the way on the floor, and that's just lining up. We can't have that now see someone's had this problem with this one Okay, which it looks like they've split that to screw it in But it originally had three and someone put two on it Okay, so That's what I'm gonna put three on this one because I have three But what I'm gonna have to do is take my measurements I'm gonna take them off of that door there, and I'm gonna put The hinges on I may just do two that one seems to be working pretty good I may just do two, but what I want to have to do is I'm gonna have to chisel this out so these can set back in see how flush they are now Someone didn't do it with these ones see they just screwed them on there, and I don't like that. That's probably why it split I'm not sure but They didn't they didn't put them flush, so let me get my tools and My measuring devices and all that stuff and We're gonna get started on this thing Okay, guys what I've done was I measured the other door And I measured up to the bottom of the hinge and I put my mark there Which is one foot so? Then I took my hinge And I put it right at the bottom of that mark and I marked around there now what I'm gonna do now I'm gonna take my chisel believe it or not I've only used this like one time, but it was in the trunk of the car and it must have got moisture Now I'm gonna take this and I'm just going to chisel this Right up around there just like that. I might have to go a little deeper up here I'll do the same thing up hinge and then We'll make remarks on the door, but first remove these old door these old door hinges so There's kind of what it's gonna look like I may Shave that off just a little bit more, but that looks about right, so we're gonna do the same thing up there We want to get our marks off of that one our measurements of me, and then we're gonna put Do the same thing on this one up here So I'll be back as soon as I get that done. I'm just gonna do it the same way I did this one Okay, guys what I've done is In here that split up there. They didn't do that. Is it's gonna go like this, right? I'm gonna take this pin out that way when I go to hang it It's gonna be a lot easier and that's gonna go right. I'm gonna see there's your head go down to bottom get your punch or something I'm just using my bit. I'm gonna put the rest of these screws in then we'll hang this up I'm not sure how I can do this without getting in your guys's way I'm gonna do the same thing down to bottom you can tap them in and you guys still see that It's a ball of lined up here Okay, but that's done. We got to change the door handle The door handle is on backwards see that it's on backwards. So let's spin that around All right guys. This is what I was talking about see that's backwards because the door opens This way see that's backwards. So we got to spin this around and And Well, probably just this but we still got to take this out. So let's do that It's not very difficult Just two screws here. I had to I had one side of that hinge backwards at the bottom So I had to take it back off the bottom hinge Because it wouldn't close and it'd get about the here and it wouldn't close so It's easy to get confused when you take them apart, but it's a lot easier to put back up by yourself if you got two people It's not so bad but one person Just remember where the hinges are working if you have to I didn't but I had a 50-50 chance, right? now this lock Actually had a key at one time. So I Don't know why it's an inside door I Don't know why they'd have to do that, but they did it and it looks like that that one a little crooked But it'll be all right So let's take this out all we got to do is flip this around in order to do that Of course you got to got to take the whole knob off You know we got to do is flip that around like that Hey, that's it But we had to take the whole damn knob off to do that right, but it's okay Now she'll close But I don't want to close it just yet. All right, so it's got a key on it. That's weird Usually they just got a little hole That one's got a key too. Hmm fat head getting in the way do this so you guys can see it But it has started so I may have to just the door jam the striker plate For the height Then you just tighten these back up so like I said Most doors are generally You know About the same there. They're all pretty much standard, but When it comes to door knobs and stuff, you know, you get like a standard measurement and you know, you're like well Okay, that's about right but It could be off, you know 16th of an inch either way where it won't You know doesn't want to hit the straight plate right now if you're doing a brand new door, you know, you'll get a perfect Because you can just line them up together, but this one's close But it looks like I'm still going to have to move the straight plate up just a hair So we'll get on to that next. Okay. I'll show you what I'm talking about here maybe I Don't know if you can see inside there That's a little high so Let's get that adjusted now. It looks to me like someone has lowered this looks like see it's been lowered They have probably stripped that out and that's why they lowered it So what we're going to do is we're going to go ahead and take this off We're gonna put it up where it's supposed to be and that'll be about where our doors should be But let's see why they lowered it down like that I would say because they stripped it out now what a lot of people will do is put longer screws in and that'll work Sometimes if it don't then you may have to get some wooden matchsticks or You know trim me off a piece of wood off or something and stick it in there and That'll keep it and You know glue it if you can too and let it set up and then pre-drill your hole again No, it's not stripped now Let's see if the door will close. I won't move you back here. The door wasn't locked should stay wherever you put it It shouldn't come like if I put it there if I put it right there. It shouldn't like Gradually come back in or it shouldn't gradually come back open You know what I mean? Wherever you put that door that's where it should stay And that's how you know you got everything lined up right if it moves a little bit. That's okay But if it just starts closing like that Then it's not a you know I mean once once it gets moved it see that's okay because it's new hinges They'll wear in but if you get a little bit of movement like that is fine, but if it starts Going like that you don't have your hinges right. You don't have it lined up right, so that's uh, that's pretty good Let's take a look at this Make sure The same amount of gap all the way up and around there and we do a little tight there Down to bottom, but I'm not real concerned with that in this house is not you know There ain't no house that's straight so you open it up and it should stop wherever you put that door Just like that. There's monkeys project I don't want to show you too much of that, but think it was taken off when they did the floor I don't know why it wasn't put that on but It wasn't I'm not sure where it is. It may be in the garage, but alright So when Kim and will come and stay with us, you guys go you got a locking door And it'll be painted by them too. All right guys, so there you go so guys, it's not that hard just The um that comes with instructions when you buy the new hinges, so if you've never done it before read them close, okay In fact, watch this video or find some more on youtube. They're all over the place on how to do this. It's fairly simple Really you need a phillips screwdriver and a chisel, you know what I mean? So Maybe a hammer to tap them pins out depending on how you want to do it. So there you go guys Thanks again appreciate it. Thanks for watching. I hope this helped somebody. I know the camera work wasn't that great But hopefully you get the idea of pre-drilling them holes and stuff like that always do that because if not you'll get You'll get a split like that. I think that's what happened because like I said, they didn't even chisel that out They just put it right over top of it. So I'm gonna get off here And we'll chat at you soon. All right. Sheba the myth man of legend. I'm gone for now. Bye guys. Take care