 What's going on? Oh, man. Hope everybody out there is having an awesome time We're just out here playing around screwing around with Frostbite as you can see and Kind of upgrading a few things and I figured we would Give away some stuff That may help some people out. I don't know Definitely if you're gonna be doing the Torx storm supercharger I'm gonna probably give away some stuff. So You guys may may need it. We'll see so what we're doing today is Upgrading some stuff changing some things away or excuse me some changing some things around and If anybody is considering Doing the Torx storm supercharger on their truck I'm gonna give away some stuff that might help you guys out if you want to do an easy dilly-dally Boost thingy on your truck So what we're doing, let me switch this camera around real quick Polly says doing my install soon be man. What's up G? What's up G? Look at this. Oh be man Nobody knows about. Oh, oh shit. What's in that box? Oh Be man be man knows what's in that box Um So let's see. Let me switch this camera around show you what's up Do-do-do Come on. There we go. All right. So as most of you guys know We did a budget build on the Torx storm With clamping together You know the connectors and the pipes and what's what not has been working great We've been putting some pretty good boost on my budget build cheap Cx racing intercooler that's working good. I'm not gonna get rid of that yet and The budget boost Amazon Tubing kit that we got it's been working good But I'm gonna change it up I want to get rid of some of these clamps So I'm finally going to basically build this and weld everything up So what we're doing is I'll go over here. I went on Amazon I got me some stainless steel exhaust piping kit and We're gonna run with some stainless steel piping, which is here's a piece of it right here Looks good. It's nice and thick And I can weld it most of all the piping that I currently have That we clamp everything together with this is aluminum piping and it works well, but it's super thin and You would need to TIG weld this or something. I don't have a TIG welder I've never TIG welded before so I couldn't do that. That's why we clamped everything together This piece is exhaust pipe here And that's why this is the only piece of it is exhaust pipe because I was able to tap this Weld my blow-off valve connector up here and everything so that may work So we're switching over to a welded dilly with the pipe. I Already did the bottom piece. All right. That's my old bottom piece It's kind of dirty And as you see I got two pieces of pipe clamp together to make the bottom work Which is right here Coming off the intercooler That is what I just replaced this one's completely done and it is now one piece instead of two pieces I'll show you what it looks like here in a fender. Oh There we go And you see where I welded it together We're gonna clean that up and I'm probably actually going to get these pipes powder-coated when I'm done But that is what we're doing now What I'm getting at is if somebody Out there is doing the torch storm and they want to Basically build the same thing I did with the clamps and the pipes and everything what I'll do send me a I wouldn't do it on YouTube because sometimes the comments don't go through unfortunately Find me on Facebook. Find me on Instagram something Send me a message and tell me That you want these pipes. All right, I'll leave them all connected together with the clamps and everything and Basically, I will give you all the piping that is Currently on the truck running a torque storm So once I get all the rest of the top section here done, I got to build the top up still Once I have the top built if somebody wants the old intercooler piping I will send it to you for free. You can have it. You just have to pay the shipping So send me a message on Instagram or Facebook or whatever Tell me you want the pipes. They're yours free You just got to pay the shipping and I will send them to you when I get everything done And someone's saying Polly's like hey, I'm messaging you now. All right. Well, they're yours man. What's up? So I said they work great. They're not the prettiest because you got a lot of clamps and whatever But hey, it's holding boost. I Haven't blowed one coupler out at all So figure to help somebody out takes a lot of the guessing out So you don't have to worry about cutting the right angles and all that horseshit So if you've got a ram truck, they should fit right on your ram. You'll just need to get the intercooler and The only other piece you're gonna have to do is probably this one. Let me show you. I might throw this one in I Don't know yet. I'm trying to talk myself in the building a new one I don't have to really build a new one right here because that piece is good and I can weld to that But I might completely make a new one if I do you'll have the old one now. What's in the old one is This nozzle is for my water method that water meth injection All right, so it's tapped for a fitting for water meth that's the IET sensor that I'm still just using a Drilled hole with a grommet. I've never bloated out. It works fine And then this is the adapter I welded on to accept the Torx storm blow-off valve. Oh, yeah, look at that thing thing is just oh shit Just beautiful. Look how big that thing is Don't let the wife see that one Anywho Look at that dilly-dally Something else I'll bring up Bee man knows what's up in this box I'm gonna try to start on this tomorrow Hopefully We'll see a lot of people know what cams in my truck Know where the cam come from Well, we're going with a whole different cam and we're gonna be changing a lot of things up That's all I gotta say This is a bigger cam than in the truck. This is a boost cam. It's a custom camshaft. It's a custom grind and That video will be up here soon on whose cam and whatnot, but that's gonna be Bad-ass right there. I can't wait for that can't wait to hear it. I can't wait to see the power increase on that boost cam Other than that biggest thing about today, man, I just wanted to show you guys what I'm doing over here tinkering Giving away some free shit. That's the bottom section Hot damn. There you go I'm working on the top section now this section goes right here on the top just like that and I've already got the top piece cut as you can see I'm just trying to work my way up here to figure out what kind of Angle of the dangle I need here to weld this up with some new pipe, but I'm getting there. I'm almost done Yes, Polly it is three inch piping Three inch piping more than enough for the truck as honestly I have no idea How in the hell anybody could fit more than three inch piping through the space you have if you're going through one side like I am and I'm pretty sure that's how Pro Charger does it. They do on do it on the passenger side like this and There's just barely enough room to do three inch pipe I don't think you could fit anything bigger Unless you did a custom build where you went one pipe through here and then you did away with your window washer Box and you went through that side Don't know I'm sure there's a lot of turbo trucks out there stunk way Matter of fact Justin at Dr. differential and speed shop his turbo build I do believe I think runs one side on each like that if I don't If I do remember But yeah, if you're going on one side It's more than enough pipe but yeah Also, I don't know if you guys know But my water my window washer box is my water method injection tank I do not use it for the window washers. I have the Water meth pump which is down there On the frame That is running to the window washer box which has meth injection fluid in it that goes into the nozzle here And it sprays water meth mix when I see five pounds of boost. I don't always run it Normally to be honest, I use the water meth more when I'm on the street running a baby tomb That way it's just a little bit more safe when I'm at the track. I'm usually running race fuel So I'm not really concerned with the water meth on the racetrack because we got race gas in here And it's more than enough octane. So But that's what's up guys Other than that some of you guys made I kind of put the truck back together and I Put the back back together. I put my tray back together and we actually moved the bottle back here and bolted it to the tool storage box and then bolted the box to the floor so You won't see the bottle in the videos anymore standing straight up. It's going to be kind of more hidden down here now but it's still there guys and and Hopefully we're gonna have some pistons coming soon for the old 5-7 and We will be using that their bottle and That dude right there together to make some hellacious Shit go down. So yeah But other than that guys, I kind of need to quit gibber-jabbering so I can get some stuff done But thought you know because I was honestly a chunk those piping tubes in the trash can I was like, you know what? I've had a ton of people ask me How to do that? They've been watching the videos and they're trying to do the same thing So I was like shit somebody would probably want that stuff. So there you go free pipes hit me up They're yours pay the shipping whatever and once I get them done They'll be in the box to to sound like Polly. He was already asking about them But other than that guys stay tuned New camshaft coming up soon. I can't wait to be talking about that guy and That's it Peace stay safe out there. We'll see you on the next one