 Hello, this is LaptopMedia, and today, we will show you how to open the MSI Creator Z16 and what's inside of it. To get inside of this notebook, you need to undo 6 Phillips head screws, 2 of which are located beneath the back rubber feet. After you're done, pry the bottom panel with a plastic tool, and remove it from the chassis. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. Unfortunately, your job does not end here. Since the motherboard is facing the wrong way around, you need to remove it to access the upgradeable parts. First, disconnect the 90 watt hours battery pack, and take it away from the chassis. Then, you will need to peel the plastic protective foil. After that, undo all screws holding the motherboard, including one for the Wi-Fi card, and two for the fans. Keep in mind that one of the fan screws is hiding beneath the display cable. Speaking of cables, make sure you remove all connectors from the motherboard before you try lifting it away from the chassis. Now that we have finally taken the motherboard out of the device, we can see the two RAM Sodom slots, and the 2M.2 PCI-EX4 slots. As for the cooling solution, it comprised two heat pipes for the CPU, two heat pipes for the graphics card, and an additional heat pipe, managing the thermals of the graphics memory. If you'd like to see more disassembly videos of the latest notebooks, we would highly appreciate if you hit the like button and subscribe to the channel.