 Get yourself a multi-tank brilliant piece of kit, especially a mule walker one, so we've got the extra corners just to put out into me. That's it all set, that'll take us up. Right, rise up to scaffold height and there you go. Hooks in the back like that, away you go. Right, we're up to lint right now, so we're just going to get this lint on. We can get the block work up then. Right, lint on, profiles up, ready to get our block work done. Intermediates, I've just drilled it through the block. Can you see that? Yeah. Let's just put it on the cavity side, we can get this blasted up as quick as we can. And then we'll just swap the profiles back to the outside. So let's do this, probably this joint here, pop them in there and then away we go again. I've just joined them up, I've just got to set up. Now we have to nut the motor a lot wetter now. Oh yeah, can't get the line down there, that's as far as I can get it. So, fixed brick, cracking tool, works well with other stuff as well. There you go. I'll just stick the fixed brick on top of that line, makes the way to down. Up goes, right. Done. Superb. Now we can get the motor nut up nice and wet and get this thrown in. Nice and neatly, of course. Because there's a lot of it, we'll just go to time-match for this. Yeah, big trusses these, big pikes. There's the party wall, we'll take that up as well. These sides, ready for scaffold. And if we get the next lift up to there, we should just reach the top of the pike without too much stretching or hops. Still hoping for that plight, but not holding our breath. So, here we go. And the wind's picked up, it's cooled down, hell of a lot. It's now bearable. Well, I'll join us up. Make sure you join this hole in the block where I've left. Make sure you fill those holes up in the block. Let's get this with a profile set up. It all set, that'll take us up. Right, raise it to scaffold height. And there we go. It hooks in the back like that. You can leave that end up, mate. With that, I'll just drop a brick on each side, so we can make practice for it, that's it. Yeah, hopefully we're getting the scaffold up to here, which means we can't get profiles on, so we've built the extra corners just to put our end to meet. I'm gonna couple the mill back off that line, so we're not too tight. Jobs are good, ain't it? Get yourself a multi-tool, brilliant piece of kit, especially a mule walker one. Dick start, dropping the van off for a service, and getting back. We're up on the table, this is finally. There's a fire one, there's the one for the party wall. And here's ours for today's. So that's what's left. I forgot the drill, because I've been messing around with the van, so I'm just gonna do the fixed brick on the blocks. No drilling to put the profiles up, but we can get the profiles up on the outside, so that's okay. We'll give it up, saw for the cuts. Yeah, that's it. So let's get a couple of corners set up for starters. And we can get cracking. Pete Ross is the BBC reporter himself, he's Scottish. Now, Pete, I know you've got slightly divided loyalties, but not where Scottish football is concerned, is that right? Absolutely not, Jeremy. The game so much, is tonight's kick-off. No, it's very nervous to hear right now. It's a great song. Where are you at, Euro 96? I'm looking at my... Reasons why prosecution rates are so low, although it does recognise the reluctance from the CPS to take on cases. Police officers even using the phrase, wide bother and talking about the fact that...