 Και 보시έτε, πόσοι! Λέω back! It's Vicky here with a really fun project . Today I'm playing with a new designer's choice Dykeit by Tonic Studios. This month it comes with 16 dice in the set and you can create adorable little boxes with them. Now let's take a look first on what's included. You will also get the dice in one of those plastic pouches and they do have a tap on top that you can label if you want. και τα βάζει με κομμάτια στον κομμάτι, για να μπορείτε να τα σκοτήσεις εύκολα σε ένα τελειώμα. Τώρα, δούμε ένα κομμάτι για το τι έχεις, υπάρχουν 16 τάσεις μέχρι και θα σας δείξω τίποτα τι έχεις. Λοιπόν, πρώτα από όλοι, αυτό είναι το πάνω τάσος. Αυτό είναι το τάσος που έχεις να κομμάσεις δυο, να βάζεις το μικρό μου κομμάτι. Και φυσικά θα σας δείξω πώς είναι, να το βάζεις τα μικρό μου κομμάτι. Η κομμάτι έρχεται με τόνες δικομένες. Τώρα, έχεις αυτές οι μικές βιντες. Το συζητήρα κομμάτια, αλλά μπορείτε να σας εμβληθεί με το ένα που μεταφέγεται βόγον στη πάνω. Και there are three different designs for the front and the back. These little rectangles are for decorating the sides and you can cut out a panel and decorate them with those lovely lace looking designs. Βέβαια για να κομμάτιας τα σάτια και το βάτος του εμπλου, Υπάρχουν τρεις διαφορετικές σχέδες που δούλυσαν στους τρεις διαφορετικές πάνερες. Υπάρχουν τρεις τάξιες σε διαφορετικές σχέδες με ένα κομμάτι στον κομμάτι, ώστε να μπορείτε να το χρειαστείτε εύκολο. Βέβαια one of them says with love, the other says enjoying the third one a gift. Λοιπόν, they all give you a beautiful and bossed look. You will see how they work on my examples today. Για να κομμάσεις το πόνο και το πόνο, you can get four different designs and I will be using two of them today. Υπάρχουν τρεις διαφορετικές σχέδες που δούλυσαν σε διαφορετικές σχέδες. Υπάρχουν τίποτα the same but they aren't. One of them has a dot design, the other one has a stitched design and it is the same with those two ties that they look identical but they are actually aren't. Now by combining all these ties you get so many different options and the possibilities are really endless. I'm going to create a couple of boxes so you can see two different designs. For the first one I'm going to cut out this shape twice from pink cardstock and when you have all those pieces flat this is where you need to decorate them. So you can pick any of the window dies and cut out a window there or you can combine it with the panel to cut out panels and stick them on top of your box. It's up to you how you want to use them. And today for my examples I'm going to use both ways so you can see them in action. Now for the first one I used the die directly on top of my panel only at the front. So I created a little window and you can see the contents of the box through that. If whatever you plan to fit inside the box is very thin and you feel that they are going to fall through all those holes then you can of course back them up with an acetate for example so you can still see through or like I'm going to do later on just as an example you can use volume. Now at this stage I'm just going to reinforce all those scoring lines. I'm using my bone folder for that and with a very thin double sided tape I'm going to add some pieces only where those flaps are. So there are two flaps on its piece and I find that the size of this little box is perfect for party favors. You can fit inside little chocolates and also if you want to gift jewelry they are the perfect size so you can fit inside little necklaces or bracelets or even earrings and cut them out as a gift. Now I am peeling off the packing of those two flaps and I'm not going to video edit anything so you can see how easy it is to put these boxes together. For a construction of such a box I would recommend to go with a cardstock that it is quite heavy. The heavier the cardstock the sturdier your box is going to be. I always like to run my bone folder along those areas where the glue is just to reinforce the bonding a little bit better and at the bottom if you want you can add a little bit of glue and then slide one box on top of the other. We already have glue at the side flap so all you have to do is to align them Press them together and your little box is pretty much ready I always like to run my bone folder one more time at the bottom where that glue is just to make sure that they are nicely stuck together and now I'm going to show you how easy it is to close this box. At the top you can see those two hearts hold both of them together and press them down just a little bit and as you hold them together one after the other the flaps can slide on top. And here is the little box ready to go. Now just to take it a step further I'm going to show you different ways on how you can embellish it even more. So here I have a piece of velum I'm adding glue only on the outer edges and then I'm going to slide it through just behind the window. Now this is a step that you should have done before you put your box together it's much easier that way and again instead of using velum just to protect the contents inside you can use acetate. I'm also going to use one of the three tags that are included in the kit and I picked the one that embosses the word enjoy you will see that it is going to cut out the beautiful shape but you will be able to perfectly read the embossed enjoy word. So I have here some white thread I'm going to wrap it around my little tag it already gives you a hole once you cut it out and then I'm going to tie a double knot around the hearts this is going to allow the recipient to remove this easily and open up the box with no problem at all. I'm going to cut off the excess thread and I'm going to embellish it a little bit more with a little flower that I have on my stash you can create a paper flower if you want I'm just going to stick it down there and embellish with a couple of green leaves that I cut out and I'm going to finish off my design by adding some nuvo drops along the design of the window. So here is the first little box that I created super cute and adorable and remember that you can go a step further and embellish the sides or even the bottom and the back if you want to. Here are some closer photos on this little box and notice how readable the word enjoy is on the tag although it is just embossed. Now these boxes are super fun to create so once you make one you want to make another so here is one more for this one I used specialty card by tonic studios this is the pearl damask I don't know if you can see with my lighting the beautiful design but it is pearlescent plus it has a lovely embossed look and it is heavy so you will probably see the design in the close-up photos at the end of this video. Now for the window and for embellishing my box I'm going to use this glitter cardstock and this is the Welsh gold absolutely gorgeous and this time I'm going to cut out a beautiful design along with the outline so one inside the other I'm going to secure them down with some washi tape run them through my die cutting machine and here is what I got So for this design I'm not die cutting directly on the main construction I'm just creating a panel that I can stick on top of the side I used nouveau de luxe glue at the back and I'm going to stick it there and I'm going for a stained glass look so I will cut out the same design out of pink cardstock for the roses and out of green cardstock for the leaves and here is the finished look just standing after doing all the inlaying of the little pieces I used the pink pieces to put together the little roses and I found that there are three roses on this design as well as a few leaves now I'm reinforcing again the scoring lines with my bone folder and I'm going to put the books together just like I did with the first one Again for this one you can go ahead and create similar panels like the one that I added at the front to decorate the sides and even the back you can also die cut one of the little tags and wrap it around just like I did with the first box I decided to leave it as it is I think it looks stunning with this beautiful stained glass look and here are both the boxes that I made using the designer's choice die kit by tonic studios here are some close-up photos and don't forget just like always you will find down below links to everything I use for creating my project today I hope that you had fun, that you got inspired thank you all so much for watching and I'll see you all next time