 right okay so I'm going to put these I'm presumably over here these spaces on their headers lifted as well I go by is as I don't know what they're called so it's a little screw goes in through the top lock just needs the chip to go in there I still don't know where the third where the third passive is you've got to spare one of those I don't think that comes with that I think that's my mind we've got all the sounds of it scary because much the way they go I think you've got to cut them individually and yeah jump blue red blue red blue red blue red so I think these need to be solid and then I think that's what I'm going to do is cut them individually and just pop them in like that I presume that so you can actually take off the LEDs and service if necessary not quite sure what I'm going to do so I'm going to see if I can get away with just for all the ones that want for the colors and put those in first and solve them a bit missing on the side I presume this is why they give you two strips of this because they're a little bit yeah you gotta be careful how you cut these as well or you're gonna have some of extra bits of plastic some chunks of plastic missing I don't want that so well you've got a few like that just chuck on I'm hoping I can just grab that turn that over and all those should still be sort of placing them downwards and then put it back down again without messing it up okay I'm going to put this side and have something take off I don't know if you can see but none of them are sort of like pushed through correctly but they're tacked in place so what I'm going to do now is I'm just going to go back with my solar and just push them all into place they do stand off a little time but anyway well it looks good they don't actually fit directly into the board okay well that's half that's half the base and so far so good so far so good I'm gonna have my down though and then she'll be back very very shortly I just noticed something the flickering in relation to I don't know what it is it depends on but if I move it down it flickers but I'll move it up it stops so what I gotta put it over when I want a solar so I can see clear I'm really sorry about the flicker I don't know what I can do I've tried doing things in the settings but that doesn't want to you recall the light now so I can see more clearly it flickers it is an LED lamp maybe I had to change the other one which is fluorescent because the bit that makes it go into the clump with it sticks up broke because I kept turning the lamp the other way around pulling it backwards I think I'm sorry to any Chinese people it turns out that's not all it's a part so that's apparently the buttoner I'm gonna do that again this thing's not going to stand up 100% straight anyway I'm sure I can sit and feel trying to make perfect but that's gonna happen a lot I really don't know now let's figure out these so basically this it's going to go something like this this is actually gonna be fun so I don't know what is the correct way of doing this okay let's see how this is gonna go so the long lead is red I'm sure one is blue and then we're gonna put them in place I don't know it's just over it so yeah basically that's how they're gonna go just something like that and I'm just gonna put a little tappas old on there that's what I'm gonna do now okay so that looks like it's gonna be fine just like that it's gonna be good enough for me now I don't know if you're supposed to sold them all into these holes I suppose that would be the end game I'm not quite sure I'm sold these onto I'm gonna check if I'm actually doing this right because I've not got anything up here I'm just gonna put the camera on so I'm gonna speed all this up so you have to sit and endure all this because this is gonna take a while there's a little bit fiddly just getting there just getting the legs and there's a little bit fiddly I've had a funny feeling that as that's where the wires come out of this doesn't want to be in here like this so what I'm gonna do is I'm gonna take this out and then turn it around I'll just notice on the board that the wires come out of here these bits in the middle so you want to make sure that the the beams go across then bits in the middle that's why your wires are gonna go up and connect onto these the more these go down firmly then hard it's gonna make me to take them out again so I'm a little bit worried about pushing these in too firm okay so I'm gonna take them out I've got a funny thing I'm just gonna build it on top of each other and however it turns out is how it turns out keep putting these in and taking them out leads to more frustration possibly unbent legs I'm just straightening them a little bit that's almost pushing on itself which will be great when I've sold it like that just pushing a little bit of soldering as soon as I start soldering it I'm melting it anyway yeah so I think what I'm gonna do is I'm gonna I'm just gonna sold them into place and leave them I don't want to keep taking this apart so I can imagine it's gonna be a pain in the butt so there we go so far the neatest but they're not knocked on by I'm sure a little bit of tweaking now this is gonna be this is this is the bit that's gonna be a this is gonna be more difficult because now well unless I take these out and do the next one like that what I'm gonna find is I'm gonna do them one at a time and solder lift this up and solder lift this up now that I don't know what's gonna work out better whether it's gonna work out better for me to do it like that or whether it's gonna work out better for me to just try and solder on like this because that's basically what I'm gonna do now I've got a solder that to that and then carry on you know why that was wasn't off so much but that's what I'm gonna do now and solder that to that or take these this out and do it again to then attach the layers on top of each other like that I don't know this is gonna be a little bit tricky I think now whichever way I do it it's gonna be a bit tricky we certainly can't just put a few in and solder it's gonna be basically a balancing job right yes I think maybe it works just as well with just a few of them rather than me on top all four maybe we want to be on the same sort of height I don't know to solder to the backs can I get into all the backs I suppose that is gonna be the way to do it yeah well I think that's gonna be it I think this is gonna be the way to do it just to solder directly like that let's see what can do it I set this up in a SMD way it's sticking up all the time I think it may be good to tin the legs I think let's give it another go because what we don't want to do is kill off these other things are too much heat that's for sure these are a little bit temperamental so heat as I found out before once I got one leg on just okay okay I don't seem too bad just a little bit let's try another one see if again tin the leads because these sold these LED legs some of them seem to be a lot easier to solder than others this one's alive I can imagine this is where it's gonna get a bit difficult as you start