 Welcome to the Canada Science and Technology Museum. I'll take you on a short guided tour of the renovation project that we've started a year and a half ago. We affectionately call it the Reboot Project, so follow me and I'll talk as we go. Basically I'll take you to the first base which is the temporary hall exhibit where we've upgraded the mechanical system so we can accept the blockbuster exhibits through over the next decade or so. So the mechanical system has been upgraded to an ASHRAE standard A. So more humidification, better control on the overall heating and cooling system. And on top of that over the last year and a half we've been upgrading the mechanical system which we'll see in the room beside it and this mechanical room has updated the system from a basic bakery to a full-fledged museum with all the environmental control to protect the artifacts all the way through. To help us achieve those mechanical standards we went from our valley in the walls, from our maybe one or two from the ceiling in the walls to our 31 in the ceiling and our 27 in the walls. So that's going to lower overall energy consumption in the museum. We'll show you where all the demos are going to be done in the near future or when we open. This is the area where children, elderly, all their visitorships are going to be able to witness and be part of cool experiment science that will demonstrate the science and the technology behind different aspects. So as you can see it's going to be a big circle oval. And as we're walking on this floor I'll bring your attention that the entire floor area has been leveled off. So from the bakery, shipping and receiving areas in the past where the museum was on multi-levels the museum took the decision to make it more accessible. So one level floor all the way through except for an area in the back of the museum where it's at the same level as the train and the technical difficulties of raising trains at that point is where we made the decision to have only one ramp now on the museum instead of several at the time of closure. Behind the orange tarps the train bay which hasn't changed still pretty much the same except a lot better views of the trains because we made modifications to access walls going in and brand new mechanical system that we have through the museum so much better environment for the trains that are staying into the building. Okay so we're now in the main entrance of our new museum. As you can see it's a little bit bigger. There's two things the entrance is much bigger and it's going to be the beacon of the Science and Technology Museum campus. The sheer size will attract attention to the main entrance. The other thing I'd like to point out is at the main entrance we will have a full LED screen immersion experience. So as you can see the front entrance there's a small cubicle as you come in but the main entrance as you can see has been all platted up. That's going to be all LED screen so you're going to be able to see it from far but you're going to have a full immersion of the LED process as you're walking in so you're going to be fully immersed. That LED screen is going to be there to promote Science and Tech and it's going to be there to promote kinesium coast to coast to coast. We just entered the children's gallery so as you can see the walls are going up quickly and it will be living beside other galleries but as you can see in the far you have the demo stage area. So we're going to turn into one of our classrooms which we have five of. State of the art classroom are here to promote education number one and number two is to ensure that we can deliver programs through the education process and the fun part of these classrooms are they're going to be kids are going to be able to learn remotely because we will have the systems in place so kids from coast to coast to coast will be able to learn in these classrooms even if they're not present here so it's called distance learning and I guess that's the end of the visit. I hope you enjoyed till next time.