 Are you ready for Hot Makes? Oh, yeah! Everybody, welcome to Hot Makes right here on The Edge of Tech, where we aim to entertain and educate the maker community. My name is Macho Man, Nerdy J, I don't know. And this is the pooch. How you doing, pooch? Fantastic, Nerdy J. That was a fantastic lead-in today, really harking back. The only thing it was missing is you didn't have a slim gym, you know, to snap into. Oh, yeah! What a deal! A lot of people talking already, and we were talking before the stream, and I didn't even look at the chat yet. So, hey everybody, hope you guys are doing great. And again, welcome to the stream and welcome to Hot Makes, where you can go on Twitter and soon to be Instagram, hopefully. Hit that hashtag, type Hot Makes and tag anything you do or anything you see out there. And we'll show it on the show or show most of it. We're getting a ton of them. So, it's getting really hard to show everything, but I love it. How was your week? It was good. It was a good week, man. We had a fantastic weekend. I know a lot of people got a rowdy chat going today. Good to see everybody and saw a lot of them over the weekend for the Cyberdeck VertCon, which was a lot of fun. That was a blast. If you guys haven't had a chance to go back and check out some of that, we saw some amazing entries for some really killer Cyberdecks that people have been working on, everything from little handhelds to just massive stuff in between. So, that was a lot of fun. What did you think? Oh, man, I thought it was great. We went on, I think, around 8.45 our time and we hung out for like an hour, a little over an hour. And we saw some just amazing stuff. There was a couple of people they brought in guest-wise that just blew my mind. One guy, Paul, I think it was Paul, he made his own Geiger counter and he's like, hang on, I could test this. And he reaches down and he pulls up. What was it? There's a man with a Marasinium or whatever the stuff you found. But he's like, yeah, I could test this. Watch, he just pulls it out. I'm like, who has that sitting in it? He had a gas sensor going. His background was like he was inside of a pod orbiting the earlier International Space Station or something like that. And there was like a gas sensor beeping and going off. He's like, I'm sorry. I like made this little Arduino based, you know, noxious gas sensor. And it's like beeping in the background. I'm like, am I the only one that's worried about this? He's like, oh, yeah, the air quality is not good here. Don't worry about it. It's fine. It's fine. Well, he's like, I was up to like 3 a.m. Just whipping this up. I was spray painting. So the air quality is not the best, right? I'm just like, holy moly. Ethan's dad says Paul H was awesome. That is absolutely true. I mean, everyone that went on right before him, there was a gentleman that went on and maybe you remember his name. Who had those little, I called him like walkie texties. Yeah, he looked like MSG, but I don't remember what his name name was. Yeah, but it's a Laura, L-O-R-A based walkie-texty, walkie-talkie that does texting, right? That's what I called it. Yeah, I thought that was a lot of fun. I don't know. I mean, it was a blast. I love to hang out with those guys. And you know, I'm going to build one. I have the idea now. I'm going to work with Blasto. I'm not sure if Blasto is here in the chat yet, but I have the idea now in my head of what I want to do. And it's going to be a lot of fun. Ooh, ideas floating around Jim's head. Can't wait. So I shaved. Yeah, yeah, I shaved. You did. You did shave. Congrats on that. Looking good. Yeah, this is for you. Someone said I look like a wrestler. What's my wrestling name? I'm a feather light. So, you know, what is it feather? Like, I don't know what the weight is, but feather weight, feather phantom weight. I don't know. Phantom light weight. Yeah, yeah, I think we should ask the chat who what your wrestler name is. Yes, yeah, yeah, the chat. What's my wrestler name? We'll give you to the end of the show to figure that out. And I tell you what, if you wanted to donate, we wouldn't say no to a PayPal or super chat when we're, you know, with wrestling names today and you'll even see the Bancing Penguin. I mean, Dancing Penguin was a hit last week. You know, Blasto is here. So, hey, it was, it was a blast, Blasto. But hey, don't forget, we're just starting the stream. If you're new here, like I said a little while ago, you know, tell us, tell us what we're here for. Pooch, tell us why. We're here for you, ladies and gentlemen, and we are here to tell you about what is the hottest in the world of making this past week based on the things that you guys have submitted to us, right, using hashtag HotMakes. So, you know, as Jim said at the lead-in, you know, we try to entertain, we try to educate, but you know, the meat and potatoes is, it's sharing all the great stuff that you guys are making throughout the week, throughout the months and stuff like that and saving you guys some time and effort from having to scroll because nobody likes scrolling. Scrolling is hard, right? It's like, let us be your scroll wheel. I agree. And I tell you what, we are super pumped to announce that Things is going to continue sponsoring the show, as you can see on the bottom. Spoiler alert, it's right on the bottom of the screen. Spoiler. They're going to be around for a while, so check it out. Every week, we're going to give away a $50 Amazon gift card right here on the show, along with other prizes. So we have some other stuff we need to give away too soon, and I'm not sure if we're going to do it tonight, but stay tuned because we have some cool stuff to give away. But 50 bucks from Amazon, anywhere in the world, as long as you have an Amazon that delivers to you, courtesy of Thangs. Miss Thangs, she is in the house with us, Joanna, and she's awesome. So speaking of Thangs, they actually said, hey, we have something really cool that you should feature. Andrew Rogers, the extruder. I like it. The extruder, yeah. But speaking of Thangs, we had some really cool stuff that she said, did you guys like Daft Punk? And I said, awesome, man. Whoa, I forgot. There you go. Do we say rest in peace? Because we got the word that they broke up last week, but I think they've been seeing a lot of hype as a result of that. People were like, oh, man, Daft Punk broke up. But I mean, they've been together a long time too. A long, long time. Maybe we'll get lucky and they'll get back together. Yeah. Huh? See what I did there? Get lucky. Yeah, you don't want me singing. So this is what she sent over. And let's see if I can scroll my whole window. Not just that. Hang on. So let's see. How do I move this back over since I screwed the window up? Whoa, whoa. There we go. Look at that. Yeah. This is one of the helmets that is on things right now. And we're going to have Geary throw in the links to all, or both of these helmets and both the necklaces. And I think Geary is a big Daft Punk fan as well. And so, is that true? Geary? Geary, are you a big Daft Punk fan? Definitely. I'm a huge Daft Punk fan. They speak to you in a way? Yeah, they are. I'm a huge fan of the robots. Yeah. Yeah. That's great. Yeah. I've seen Daft Punk helmets before that are 3D printable, but I really think that these ones are better. Nice. Nice. It seems like the person who put these together really worked on them. Yeah, definitely. That was an upgrade in the code. Thank you. Thank you. Geary found a little Daft Punk voice. That's awesome. Yeah, sometimes you really need to work it. Yeah, you really do need to work it sometimes. Geary, that's amazing. My question is, you know, if I print them in solid infill, do you think that'll make them taller? Yeah, taller? I don't know. Faster? I was thinking less breakable. Do we have something for that? You know, I think this is the one that... I don't have that one. You just don't have that one. I missed a code. I missed a line. But yeah, I love this. So it's both of the helmets here. Wow. Of course, my window is all crazy today, but let's see if I can scroll down. There we go. Manuel. There we go. So I absolutely love these, and I think it would be a ton of fun to print. Sure. The models look great, and it comes with all the pieces, right? Yeah. And then, of course, you have your necklaces. You got to have the necklaces. See, I didn't know about this. I didn't know Daft Punk had necklaces and stuff that went with it. See, obviously, I'm not the huge die-hard fan that everybody is, but... Yeah. I know Joel and Stephanie made those helmets a couple years ago, and we're showing them off at, I think it was New York Maker Faire, and they came out awesome because they had the full-on, like, Neopixel light up and the eyes and stuff, and I think Joel sent his to Loyal. If I'm not mistaken. Loyal, are you with us? He was posting a helmet, a picture of that helmet, I think not too long ago, so it's a neat build. Nice. Check this out. Yeah. I mean, that is... it's a phenomenal build. There we go. So these are picks that we were allowed to share with you guys, and I absolutely love this. I love how it looks. I think the... Like you said, you dropped the Neopixels in there, and aw, that would be awesome. Yeah. Yeah, and I'm pretty sure they both got details on their build. If you don't know who I'm talking about too, Stephanie, she's much bigger on the gram, but has a really great YouTube channel. Has done a lot of awesome builds that are 3D printing, but then a lot of electronics integrations and stuff like that too. So she's absolutely worth checking out. I'll get her linkage. We'll put it down here in the scroller. I'll send it over to Geary. You haven't put it up. Yeah. But she's cool for checking out. And I think we threw the links in the description. I was talking, so I missed it, but I'm pretty sure all four links are in the description. If not, you can find them in the chat. I mean, you can find them in the description of this video as well. So check that out. Support things. The site is, as you saw, it's super responsive. It's fast. They have a ton of stuff on there. And we just wanted to thank you again for sponsoring HotMakes for the foreseeable future. So thank you so much, everyone. For all of... Thank you, Miss Tang, for sponsoring us for all of 2021 and 2022. I never said that. I said for the foreseeable future. And in eternity. Yes, yes. All of time. Pretty much forever. Yeah. So what else we got? We have something new on the docket tonight, right? We do. We do. We do, because I mean, we do this all the time, but it's like now we have an official section because we've got graphics. We've got a bumper, right? So what is the time for, Jim? I think it's time for announcements! Announcements! Okay, listen up, everybody. Turn up your volumes. Announcements. Attention. We have an announcement. Attention. We have an announcement. Yes, mom. Yeah. Mom, I'm doing a thing. Mom, I'm doing a thing. So first of all, first of all, how awesome was that? I love that. There were a ton of birthdays this last week, and I'm not saying that because it was my birthday. Happy birthday to me. Happy birthday, bud. It was actually Joe Proust's birthday. Yeah. Who else do we have? Oh, Josh, Alien 3D at birthday shake. Happy birthday, Joe. Mike, never let the machine win. Mike, happy birthday. I think he's still with us. What's going to be amazing is that the day that he's not with us, do you think it'll be because the machine's actually got him? Maybe. They won. That's the way to go. If he's going to go, you know, I don't know if he's with us tonight, but anyway, happy birthday to everybody. Happy birthday. If I forgot your name, because I know there was a lot of them, but if I forgot, happy birthday to everybody. Yeah. Proust, Mike, Josh, everybody, happy birthday, everybody else that we miss. Happy birthday. Oh, yeah. I need like a confetti cannon. But in the world of making announcements, big one. Yes. We got a date for Murph. Murph, 2021. We picked a date and we're praying that it can happen. You know what I mean? I think everybody wants it to happen. My fingers are crossed. I took the days off at work. Well, mostly the day before and the day after. Why not? He cleared the calendar. Yeah. I cleared my calendar. I'll be available for autographs, you know, that kind of thing. I'll schedule times. I'll be at the RevCord booth probably. Sure. I guess that means we're having booths. Yeah. Surprise. You're coming too. We could just have a hot makes booth. Yeah. So what are the dates, Jim? What is it? June? I believe it's June 25th through 27th of June, of 25th and the 27th. Yeah. Of 2021. So if you don't know what Murph is, it's literally like the 3D printing pilgrimage, right? Yeah. Here we go. So it's in Goshen, Indiana, in the middle of the country, in Amish country. And we all make the pilgrimage because it's like, you got to fly. It's a fly or a drive. Like I always fly into Chicago and then it's a two hour drive from there. It's awesome. But, you know, there's some people who will fly into Detroit, drive from there. It's a neat, really neat event. It's a lot of, you know, a lot of companies are there, but it's not so much about the company. I think the reason that it's so popular is that it's way more maker centric. And so like so many of the tables, it's just a giant show and tell of 3D printing, awesomeness, new printer concepts that people are coming up with, stuff they've made. It's just a lot of fun. And it's an in a neat part of, you know, the country that you might not otherwise visit. I love it. You love it. It's phenomenal. I think everybody needs to go at least once. I really do because I went the first time I went, I mean, that's where I met you the first time, right? And I just, we had such, you know, I had to turn, I apologize, I'm a little bit, I turned off the alerts for subscribers because I was just a star for like the last three minutes. But, but I mean, I went the first time. I think it was 2019. Yeah. That was the first one I went to. And I'm not going to lie. I was super overwhelmed. For one, it was tiny. It was crowded. I know they have a much bigger space now. And not only that, but it was packed. And it was just like, I was like, I never saw so much 3D printing stuff. I'm talking like manmade stuff to everything, right? And it was, it was awesome. So if you get the chance at least once, you got to go to Murph. I think it's still free to get in for, for, you know, anyone that just goes. And, you know, it's, it's literally, it's amazing. You can fly into Chicago. I think you can fly into like Toledo or something too. Fly into a lot of places. I mean, you could drive after. Yeah, yeah. But it's amazing. So if you get the chance, definitely go. If everything works out right, I'll be there. I'm hoping Pooch will be there. We might even bring Geary with us. I'm not even sure. I mean, why not? We'll bring Geary. He'll fit in your, your carry on. Right. I'll go. I'll go. Yes. And we'll do a, if we go, I mean, if everything pans out, I'm praying, right? If everything pans out, we should do an on-location hot mix. What do you think? Oh, that sounds interesting. I'm in. Yeah, why not? We'll walk around. We'll find the stuff and we'll bring it straight to people. Coming at you live from the Midwest RepRap Festival 2021 here. Coming at you live from, sorry. All right. That's it. But anyways, yeah, that was our announcements of the day. And I hope you guys like the new bumper. Thank you so much, Caleb, out there. I know he's in the stream for, for hooking us up with a new announcements bumper. That was a lot of fun. And see you guys soon. Sarah Johnson, happy birthday on the 11th. She said, I don't know if anyone else commented, but I did see hers. Who's in the name? Who's a what's the name? What's the name? He's got a birthday. Lots of birthday. A lot of Pisces people here. Yeah. The fish. I like it. Happy birthday, everybody. What else we got? What else we got tonight? I mean, we got a lot of hot makes tonight, too. Well, let's get to it, my friend. Should we jump into them? Jump. Well, all right. Time for some hot makes while we're doing some hot makes. What are you guys drinking? This is my Christmas Starbucks cup. That was like $2. But in here, I made my own. I don't even know what I was. It was an iced. Some fancy. I know it. It's an iced coffee with butterscotch and white chocolate. And I have my I drink coffee and then do things shirt on from Woot. It's a new Woot shirt, huh? And then do things. I drink coffee and then do things. So let us know in the comments what you guys are drinking. What do you got? You got tea? I got the Picard special today. I got Earl Grey tea. Yes. I love Earl Grey. I love Earl Grey. It's good. Of course it has to be hot, right? It's good. All right. We'll start us off. Abby Brown, a make of my Star Wars word cloud was posted by lots of millions on Colts today. I designed it. I would say I designed this with Wolfram Research Mathematica. It's so cool. Yeah, I agree. This thing is pretty awesome. So I clicked on it earlier and I went in and checked this out. I love it. Yeah. It's such a neat idea too. The tag cloud that was originally made popular by WordPress where we start to see the blog and you would just start to see the things that were tagged or the keywords that were most prevalent. But it's such a neat idea of combining it with a piece of 3D printable art. Right. And I love that it in this case looks like they did the two color thing, maybe a color swap. And it's pretty cool. Did they or is that just the lighting? I can't, it's hard to tell. You think that's extreme with the light on it? If you're here with us, let us know. Yeah. It looks really awesome. So nice work, Abby. Once again, welcome to Hot Makes. We had a rowdy back to Hot Makes last week. Last week was a rowdy. Yeah, yeah. Oh, this is, this is one of my favorites of the week. Of course, Tom, Tom Lama, 3D printing Lama had to come up with something every 3D printing toolset should have. It is a 3D printable banana for scale. Hercules. I love it. This is my favorite. So it's a quarter banana, a half banana, three quarters banana, a full banana. And it says right here, Hot Makes official banana scale. That's how you know it's Hot Makes official. Yeah. Yeah. What scale is it printed at? We don't have a banana. Banana. The size of that banana. Yeah. I mean, it's banana scale. Banana scale. Yeah. Perfect. That's what we need. Nice work, Tommy Lama. We love it. We love you. Keep up the good work. I love it. 3D. Okam. OCCAM. Okam. I apologize about that. Like Occam's razor. Occam. Yeah, yeah. There you go. Pijenzel. It's my first Boba paint job designed by Galactic Armory, still a visor to install. But check out this great helmet. You know, first paint that he said, I think that's phenomenal. I love the wearing on it. I do too. The weathering is fantastic. Yeah. Does the, I don't even know what to call it. Is it his little like view piece? Does that like, it looks like it might even be able to toggle down. I think it does toggle down. It looks like it does. It's called a Rangefinder. It's called a Rangefinder. Rangefinder. It's just Rangefinder. Thank you. So it launches backpack missile. Yeah. Yeah. I love it. Nice work. Thank you, Gary. Yeah. Thank you, Gary. See, I knew I programmed him for something. He's very helpful. Yeah. Yes. This one. Well, go ahead. Go ahead. This, this is one of my favorites. And I tweeted about this again today because he just released the actual operational video of this today. But this is a screw sorter and it's really pretty, pretty basic in its inception. You have the ability here with that little crank down at the bottom to adjust the distance between those little rails, you know, the grizzly bars for those of you who are big on, on your mining shows or whatever. But basically it, you adjust it so it catches screws of anything larger than a certain size. So you might set that to like M2, M3, and it would catch everything that's too big, let everything smaller fall through. And then you can empty, there's a little removable tray and it just makes it so much nicer and easier for going through a hodgepodge of screws. Now, granted, it's just for like consistent diameters, not lengths, but still way better than just having a giant bucket that you have to kind of peck through to say, hey, here's all my M3 screws. Here's all my, because you can much more easily find the length you need. And it's just cool to look at, right? I mean, look at this. I love that. And, you know, in just in case you have a screw loose, you can always sort it. Just throw it in there and sort it. It's available on PrusaPrinters.org. It is called the Incanceivable. Get it, get it, get it. And there it is. There's the video. Let's go. Let's give it a watch there, the demo video. I just love the mechanics of this thing. I love it. Oh, that's cool. All right. So he takes it, takes the screw. He finds the head size with the screw. Yep. Okay. So first you adjust it to the size you need. There you go. That's catching everything. Look, there's your close-up. Okay. M5s. It'll catch M5s. M4s go through. Oh. This is my favorite. M4, M4, M4. M4, M4, M4. M4. So good. Yeah. Yeah. It's like a sifter. Yeah. It's a sifter. It's exactly what it is. And there he goes. And now he's got everything less than M5. And then you could work it down, you know, the way you could probably start with smaller, go to bigger. It seems like he's had the way, the way I was watching him do it earlier, it seems like you have kind of more luck. Put the less you input, the less stuff gets kind of caught up on itself. So, but, you know, neat little build and seems very practical. I would absolutely use that. Yeah. Well, and you love, you know, you're a good lover of practical prints. So that's definitely, you know, I really like that. I love the idea of the cams and the gears and how it works. That's nice work. Awesome job. Who we got next? Ali. Oh, man. So I watched this. If you get time, watch this. We'll find the link and we'll put it in the description. This is only a quick six second play of it. Let's see. Of course, I guess we have to watch a. We have to watch an ad first. Yeah. Yeah. Verizon. Okay. So, I'm going to get a doorstop, like musical instrument. Spags is one of my, it's too bad we don't have the audio because it's pretty incredible that she's actually got a tune going with this whole thing. It's funny. She's hilarious. I never saw her before until this. You've never seen Spags before, man. She's one of my favorite creators. Her energy is so good. She is. You got to, you got to go back through her, her back catalog. Like there is just, she does not disappoint, man. Like constant hilarity. We got a, we got a banana super sticker from Marcel off axis. Marcel. Marcel. Marcel. Yeah. Thank you so much for the banana super sticker. $1.49 for the banana for scale. Thank you so much. Anyway, Allie Spagnola, if you guys haven't heard before, check her out. She's one of my favorites. She's phenomenal. Not, not a lot of long, you know, it's good short form, but she'll go deep on some stuff. And it's, she's, she's just incredibly talented, very good musician, amazing comedian. Like she's just got great comedic appeal. She's great. It was hilarious. Yeah. All right. Does stuff like that all the time. That's a great. Merkt. To commemorate the landing of the press surveillance, perseverance rover, if I could talk. This is what they printed. I love this. Cool. This is such a cool idea. And I believe they said it was, I thought they said it was available out there. Maybe it was Prusa. Floalistic Mars desk organizer. Yeah. On the Sidewinder X1, good machine. And it looks like we got some SD cards and a pen holder. And of course mission accomplished bear in the center. So that was a really cool print. Very nice. A good one from Elf Loelistico. He's one of my faves too. Travis. Travis, Chris Travis, the black cat by Eastman. And here, let's, let's just do this. There we go. Check that out. Yeah. It's a good print. I mean, what can you say? Good print. Solid print. Nice work, Chris. It looks like it was printed on MK3S using IdeaMaker and the Warcocky pretty PLA profile. And it's definitely some pretty PLA. Now that's interesting. Chris, if you're here, tell us why you decided you wanted to use IdeaMaker with the Prusa as opposed to just the traditional Prusa slicer. Yeah, yeah. Good question. Not that you don't, not that you have to use Prusa slicer. I'm just curious if there was a, some use case that, that made you want to do that. Or maybe you just like IdeaMaker better in general. True. That's true. That's totally allowed. We've got a blank screen here. Loading. Ah, from Connie. There we go. Oh yeah, this one. This one is a good one. So this was a, Connie Madden here tagged us and this was a fun little, let's see if I can make it. Got your method soap. Yeah, here. There we go. That's the thing. Are they put the thing on the soap? See? Yeah. And then watch this. Yes. No way. That Mickey soap. No way. Yeah. Yeah. Oh, that's hot. That's hot. That was awesome. We'll watch it again here. But yeah, I thought that was such a great idea. Apparently I got to zoom in on it. Clever is that. Who came up with that? That's amazing. I don't know. Who came up with the ads in the middle of the screen? There we go. Wait. Yeah. It's so clean, dude. Look at that. I know. I love it. I wonder what else that works with. I wonder what else you could design. Hey, Addy, if you're watching, let's see a Star Wars one. Yeah. Yeah. You'd need to be good, simpler geometric shapes. But you know why not? That's fun. Right. The next one comes to us from Steven, the light speed. Apparently we're going to click buttons. There we go. All right. So we got a 7mm nozzle lamp by Chris Kay on Colts. Printed in Amazon Basics Glow in the dark PLA. Filamentum Silver. And both prints are flawless. Check this out. Yes. Yeah. I need to print this. Ropey, look at that. That's fun. That's a great piece, man. That's a good display piece. I really should make one of those two for the shop. That would be good. Look how bright that thing is from his, you know. So bright. I absolutely love it. And like you said, I think this is a perfect show piece. Like if you want to show a cool thing that lights up, it kind of shows off 3D printing. This is a perfect piece to do. Something like this is a perfect piece to do that with. Yeah. Yeah. I think Steven's with us. How hard, I think he said it was a pretty easy. Reality is easy and fun project. So how long of printing did this take? And like how hard were the pieces to actually slice? Let us know in the chat. We're definitely, I'm definitely interested in that. I'm going to jump on that one. Do a jump on it. Oh yeah. Here we go. Jim. So Joel was talking about his stream for the Neptune 2. And someone said, I was stuck at work. At least I can weld a benchy. Sort of. That's awesome. I love it. Welded benchy. I had never seen that before. That's some pretty good detail there. And that would have been a hot make. Was that not the hot make? Someone tagged it. It has to be done. Hot make so long. I love it. Definitely a hot make. I don't think that one floats though. Do you think you could read the text on the bottom? On the bottom. Might be stuck to the bed in this case. Nice. Go ahead. Nice. 24 hours on the real core. Nice. Yeah. I think it's a little stuck. I don't think you're getting that off. Yeah. That's better than not floating. It's definitely not floating. Better than Magigoo. Yeah. Yeah. Yeah. All right. Next. Willow. Oh my God. Hang on. I got to pause this. Maybe. Maybe. Werewolf update. We've been watching the werewolf for a while. Right. I am a high area. I never get tired of making videos of this head. Look at that. I mean here. We got to do this. Embegin it. We'll go back. Look at that for a while. Yeah. So you see a blink. The eyelids are latex now. So they're like attached and they. Whoa. Whoa. You see the ears move too? Yeah. Yeah. Come man. And it's all it's all controlled by like her jaw motion and stuff too, right? Yeah, and there's sensors for the blinking like or is it following is it tracking her eyes? I think it is. I'm not sure if it's tracking hers or it's a random blink, but We we should definitely find out though. We should Maybe we will maybe we will Nice, but nice work. Willow as always. I'm glad you guys I'm glad you keep getting tagged out for us because we love to see the work and you know We we got to have you on soon for sure No, never. No, she just I was gonna say I just saw a tweet earlier this afternoon that she knows What's that? I don't know what's happening right now, but this is amazing. This might be the best part of the show So it's just Blinky Blinky rant. Yeah. Yeah, it's just the pooch I Think deaf punk has taken over my PC Have you tried turning it off and on again, it's good advice. Maybe maybe I should yeah That was that was amazing so So we'll pull that out for a second, but yeah, that was awesome for a second there It was flashing the pooch rants like symbol Right reboot Oh, thanks Kyle Davis. Hello to you too. Here's a two. Here's a tour. Here's a deuce for you. Thank you Thank you so much Yeah, that was that was amazing. So I don't know why it was stuck. Oh, I see why it was stuck on the pooch rants now But it's definitely tweaking Yeah, you're just winging out on us, huh? Yeah, Jim's computer that particular that particular tab tab is freaking out So there's that Anyone was gonna say was I did see a note today that the feline version of the mass that she was doing Is It's gonna be available for sale the base so I guess you can get these and and it acts as a base And you can make your own, you know Prop on top of it. If you want to add add the skin to it. I guess really yeah That would be phenomenal Yeah, which you just gonna walk around you make your own little furry costume and Put a little format shoe on it or whatever you need. It'd be great. And we're back. Okay So this is why your yours was is freaking out on your symbol here for a second So this is a box tease because you're definitely a box tease box tease. Yeah box box tease Who hot makes that that wasn't that wasn't no no no no. Yeah. Yeah, what we got here What are we looking at go on? This is this is an upcoming thing that that I've had It's probably the number one request that I get from anybody that's interested in rep arts and stuff is Hey, I want to be able to use the bigger schools And so I spent a lot of time noodling, you know a couple different lunches larger rep box versions and stuff like that, but this is and I can't take full credit for this. This is thanks in part to William who's what my He's my ops director helps with running the print farm and stuff like that We went back and forth, but he really was advocating for this turntable design specifically for use in our print farm Because we have limited space and footprint, you know, basically the closer you can keep things together The more printers we can put on racking and stuff, right? And this is what we came to we kind of combined it with our decoupling That idea that we got from Stefan over at CNC kitchen I don't know if you ever see that where he talks about you know taking a granite slab or a block and putting So there's a foam mat in between and that helps Have a flat surface decouples And it's just a nice compact and less spool changing So this will be available for pre-sale this week So keep an eye out for that and I'll have more details on the mechanics the whole thing But it's we've got hundreds of hours on the farm with them now and they work a treat and I'm excited to share them with the rest of the world So our C Maniac wants to know if it's gonna be the hot makes hot box You can heat it it'll be the hot box We're settling I think on the turntable the the rbt t the ribbit Something to that effect I don't know we haven't but there's that's that's the stuff that nobody ever thinks of it's like We have to still figure out all the packaging and the branding and you know all that stuff, but Got something good. I think I'm very cool. Very cool. Hey, yeah, Jake says Hot makes came up with a low-effort way to deal with a with bed unlevelness took the spring out bottom of the pen and put it in the top So he's using a plotter, right? Yeah Delta plotter. I like it Delta plot. Yeah, and and and he's compensating for You know bed unlevelness by putting the spring up top here instead of using it in the bottom I don't know if you could see the spring up there, but That's a cool idea that because then then the pen will float right just vibrating. Yeah, I love it Yeah, so nice work there. What else we got Greg the maker. I love this. I have designed a 3d printed Raspberry Pi controlled Godot telescope Go to telescope using a photo for B. There you go. Go to Apparently, I can't talk Maybe it would drive a good if you put some oil on it, but um, it uses a raspberry 5 4b HQ camera and GPS and I think the project's been called the Microscope and has been posted on Instructable. So check this out I believe you set it up and it like follows the rotation, right? Yeah, and go to yeah go to thank you old curmudgeon You know and I Love that. I love to be able to get pictures of the earth using a raspberry pie I mean, this is all the parts of the moon that the earth the earth Yeah, no, it's it's good and I don't know if you knew this or not But Greg is one of the brilliant minds behind he works for e3d. He's one of the brilliant minds behind the tool changer okay, the also the The big box back in the day when they when e3d was doing the printer. I love that idea And you know anyone can print one now It's such a cool idea, and I love that people are putting their stuff out there for other people to do too Very a very neat idea awesome stuff. Greg. We love it Amazing work. It uses a cellular tower. I almost said it right that time. All right Matt Rogolinski Nice work here. It's a planetary gear model and It's printed in a rion transparent PETG with fluorescent green infill Yes, I Love it Very nice must be under blacklight, right? Yes Oh slow-mo. That's he's actually getting really good spin time for that thing. Those are right For a printed. Oh, we're going disco strobin. We're going disco Practical hot makes I love practical hot makes we got some Zollan Let's see. How do you keep a mini Toxy from using the stairs 3d printed holders and a hilariously laser engraved then painted and sanded removable piece of wood Had that audio too and probably freak it out Yes Like it automatically comes on when you come. Yeah, it's hilarious that it says you shall not pass and then no dog No wiener dog, you know Versus the wiener dogs and the ball rock It's a new show. I mean, it's it's on the next floor to the rings. Yeah Gandalf versus the wiener dogs um Nice work great idea. I love the practical make to Very cool, katie and thank you for the shares. Hold on. Yeah What else we got another wiener dog foiled from going up the stairs Mark Rhodes, uh, I mean What do we say everything this guy paints is phenomenal, man I mean, look at this. Yeah And it's got his little his little jet pack down there. Yeah, there's jet pack And it's got his yeah his grogu his baby Yoda in there I gotta I gotta see this real quick. What's the child check this out I mean the detail of that paint Yeah, it's so good I imagine it's very uh Mark maybe you can Tell us if this is true But I gotta imagine this is a very like soothing thing for a lot of people just to kind of sit down and and Do painting, you know, like like I'm hoping that you get some, you know catharsis. I mean, it's a good stress reliever I don't know, but it's it's nice to have a hobby Uh, that that can help You know calm the nerves given how much craziness we have in our world today I need to find more hobbies like that I've been actually getting into puzzles a lot lately just for that very reason You all sit down with a cup of tea at the end of the day and the kids will jump in sometimes or whatever and it's just, you know I don't know. I I need it Man, uh, sir. Johnson. I can get lost in my paints Uh, suddenly it's dinner time. What? Uh, 100 percent. I I can't agree like personally But I could see how you could do that because I could come out here and get lost and then, you know Lindsay's like where were you for the last four hours and I was you know Just out cleaning the shop or you know working on the laser working on the cr 30 that Has given me a lot of grief But all right nice work mark and you're here with us That's awesome, man. Thank you so much. Uh, looks like cyberdeck cafes with us too. Um Oh nice. Can't I play the audio for five seconds? I don't know. So, uh, let's see luis Dragon eggs for my patrons. It's been a miserable month miserable month. So I designed something cheery and whimsical These are awesome Uh, yeah They are very cheery and very whimsical luby and we're terribly sorry to hear you had a miserable month But we're hopeful that your march ends up better than february Uh These are just so cool. These are fires are appropriate. You know, maybe you want to do a dragon themed Easter Loyal Moses We were talking about you earlier Maybe his ears were burning because we were showing off the daft punk helmet and we were saying you had joles But that said dragon eggs Wait, wait, there we go There he is dance just for you We're also uh doing a contest today When that goes away here we go To name my wrestler I don't know name me as a wrestler Do it I still think the extruder is my favorite the extruder. That's the best one so far. Hey, you know what? We're getting towards the end of the episode. Don't forget um Do not forget to go and enter for the giveaway. You can do that in the description below nightbots blowing up the uh Chat as well every five minutes, but we're giving away a 50 dollar amazon gift card at the end of the episode So don't forget to don't forget to enter because this is your warning If uh, if you're not in now, I'm probably gonna say it like at in two more minutes, but that's it I'm not gonna warn you again. Last call for drawing time Uh, anyway back to the the dragon eggs by lubi awesome. Uh, I commented earlier. I said hey lubi How long does it actually take to how long do I have to sit on one of these dragon eggs before they hatch? And she said it doesn't take long, but you need proper hatchling Dragon egg you need proper hatching pants Oh, that sounds great. I'll take some of those when they be available She's like if I make them you have to wear them throughout murph. I said that's a deal So if she makes me dragon hatching pants, I'm gonna wear them Atters that that would be amazing. I think you should I tell you what make two pairs and I'll wear dragon pants with you um Pinecone pants Connie said her dog is growling at me which is phenomenal. Um All right, you're kind of scary looking. Yeah. Yeah Tripods garage R5 droid pretty much complete. This thing is awesome That is odd. Look at that. Yeah It's like a little stubby c3po with a Different head. Yeah different head. Yeah. Yeah It's awesome. So I believe uh tripods been on with jerry over at 3d printing and painting And they've been doing like a whole live series on on making these And it's been a lot of fun to watch. So check that out if you didn't get time. I believe it's on jerry's channel 3d printing and painting Um, but this was awesome. I I love the droid idea another another really cool thing to do You know, you can have this lit up on like one side of a shelf and then that that Extruded lamp on the other side and that would be two really cool show pieces. You know, oh sure sure Yeah There's a video below and I accidentally clicked off before I could show it. All right Sorry about that I didn't see the comment until now a new video up on my channel We won't click over there too much but cyberpunk led jacket packed with info about 3d printing on fabric So, uh, check out this jacket. It's an led 3d printed jacket Yeah, do you know what do you know much about this one? I just what I had read from looking at the video in the in the post but sophie is a prolific maker Awesome stuff is worth to just click and do a quick scrub, but it is a It is a david shory approved which is saying something because he's one of the first, you know masters of printing on fabric Um, and you know sophie is always making cool stuff. Her videos are great If you haven't seen sophie stuff definitely subscribe. Check her out. Look at this Very very cyberpunk Yeah We need to know how to pause a print how to resume a print. Oh, nice And how to stop a print completely So she goes through the whole process here. Oh, yeah. Yeah, and she's a great instructor. She's a good if you like good deep dives step by step stuff sophie's your gal Uh And you can see like what a what a neat I don't know if you've done any of this like printing on fabric before jim, but it's a really Such a cool feel to it I haven't yet, but I think I need to uh, I definitely I see david stuff all the time This is this is awesome. I love the I love the idea like you said very cyber punky Um, so cool, and it's just that great mesh of of 3d printing electronics project. It's fun It's something that's unique. It'd be a great conversation piece, you know, like right just a fun project Yeah, uh, definitely and if you have light up clothes, we want to see them I think it's cool. I I really I really like I don't know what the right event is You know, if it's every day wear or if you need, you know, the proper Gala, you know, there was the ones we saw where what was the who did the skirt? We saw where they she was jumping and like the like the drops would like move up and down Yeah, yeah. Yeah. Was it well, she'll see clukas or I don't remember I don't remember who did it but amy remember amy was showing us some of her stuff Yeah, um, that was cool. That that was the dress that changed. That's what that was Yeah, the convert the transformer dress. Yeah, that was a neat one Tim should be the a net because he is fire. Ha That is a good one. Showy. How are you? This is a great video. That's what he said. Um Yeah, I I love it What do we got next? Good old filament frenzy talking about the clock spring reciprocal vase That is absolutely talk about fire right now this Is awesome. I mean Uh, and of course his prints are amazing but This is this is uh, and you've printed this one, right? I have yeah a couple you have a handy or no So so We'll get to that in one second. Oh I want I want I want to take away from his his uh luster here, you know, uh, because this is I mean look I got to bring this in so Check this out Look at those layers. Yeah, that's see that's tom though for you. He he cherishes every layer. He is a perfectionist He just it has to and it's in the way that it creates that effect You know where it's like using the layers to the advantage of the print. So This uh, did he say what layer height he went on this guy and stuff is I believe it was point two using Uh, uh, let's see. Oh point four with the point five Yeah, awesome. So so I mean the layers are are big, right? Yeah, and that's probably why they're a little more pronounced But it looks gorgeous great color. Of course. He chooses all the best colors, you know, of course You see this filament library. It's insane. Yeah I 100 agree and and of course clock spring comes out with his base and he's like here you go So I printed it last week and then I printed it again today Um, did you know and I shot I shot it out to filament frenzy because I did I did a silk blue This is actually an arian filament um And I wanted to dial in now. This is point two with a point four nozzle And uh, you know, it was on my desk I couldn't quite get the cool effect because I was you know on my desk But you you get the effect pretty cool like Yeah, no, it's great. I mean what I love about this is it's not your typical I don't know if there's a typical clock spring, but you know, he does so much mechanical What I 100% agree. I was just look at those layers. I mean that's not bad. It's good layers Hey, that's pretty good. Yeah That is on my loyal moses prusa mini Doesn't disappoint does it it it does not and actually I have it right here So, uh, this thing is I wonder if I do this here. Let me get the sheen on that thing Yeah, look at look at the That is straight fire, bro Yeah, I love I mean this this filament is great. Say what you want about arian I've had good luck with most of their stuff and this is their their silk blue And the sheen bouncing off the light there and I did the vase here. This is my new favorite vase Hands down my new favorite. That's a nice vase. Miss. Thangs is really blowing you up. She says she is a gorgeous print Would you uh Joanna, would you display that on on your desk? Would you be proud to display such a thing? I'll bet you would. That's a nice piece right there uh also You have uh sent us 15 bucks on paypal. I wanted to thank you. Thank you so much Thank you. Thank you. I know you did that last week too. So we we appreciate that I wanted to make sure I didn't miss any before I went um But yeah, I loved again. This is my new test vase So I mean look at from from the distance. Let me block my face. So it tries to zoom in on it, but But I mean from from the distance I just love watching the shimmer when you spin it like that too. I don't know. It's having a hard time focusing on that It's mad because my face is in the way, but um, yeah, this one works. There you go Yeah, that's great. I love it. I love it hot hot hot Oh Last minute warning if you haven't registered or entered for the $50 gift card. We're pulling it In two minutes. All right Man, that's fen. He's a machine too. Like he consistently produces awesome stuff like 100 agreed Amazing like the the amount of stuff he puts out You know is just simply It's just I I'm part of his patreon. I don't I think you were his first one of your first ones too or your first Yeah, he was so that he was because it's just like the guy You know, I don't I don't typically do patreon, but uh, he just constantly produces awesome stuff I want to support him and it's uh, it's really neat Really neat to see um, and he's got You know his entire back catalog of stuff is available and he can just constantly doing new stuff So it's cool. I mean for the price right you jump on his patreon and I think it was like eight bucks or something a month But you get access to everything he's done Yeah, and that is simply cool um I mean we we have some cool stuff to show coming up and and I love printing his stuff So I'm gonna continue to print it. We'll keep showing it on the show But but uh film it frenzy nice work on your base. I had to try this sparkle it when I saw your gold I was like I got to do something sparkly so We did it sparkles Loyal moses earlier. I said thank you for the the prusa mini because that's what this came off of and he said I don't disappoint That's a true story. Um Gotta sign up for a thanks account right now if you haven't already that's right That means that means everything you print on that mini is like one. It's like loyal's grandbaby You know, it's like he made that happen. And so they're like his little grandbabies. That's awesome They're related somehow Womp womp So I I got this little button thing and I've been playing with cameras and um, thanks gym pooch and the gift card I oh thanks for jim pooch for the gift card. I won bought a magnetic stirrer and still have some money left over for film it. That's awesome Sweet bee using it for filming. It was a winner recently. Um A Little moses is running around everywhere. Mitch says, um Sure, you can say that actually I'm trying to remember what else I have around here I thought I had some other stuff printed on it But I think I left them at my desk because I love them Anyways, I think it is time. What time we got hey anything else while while we're here If there's anyone new pooch, let them know what we do here on Monday nights. Yeah, so just as a quick recap Uh, we are hot makes That's nerdy j i'm the pooch every week We come to you to review things that the community submits using hashtag hot makes on the twitter We keep saying soon to be instagram, but supposedly it's gonna happen. I don't know It's like kind of the same thing ever that hasn't happened Once now we're testing we're testing you you uh, you hashtag something you see that you think is awesome With the term hot makes which is right up here Just put the little pound sign in front of that a little hashtag sign and then we will collect them all and opine on it on the weekly every monday 4 p.m. Central 6 p.m Somewhere 4 p.m. I got that backwards 6 p.m. Central 4 p.m. Pacific It's it's it's 6 p.m. Mars time 4 p.m. Pooch time Pooch time you get your own time. We got a banana. I hope you didn't see that earlier. Um, all right. Here we go Spin that wheel for the winner The biggest rant is uh, you know hang on real quick. Let me let me do this a different way I'm gonna I'm gonna do it so we can share it bigger bigger, baby Speaking of rant. Do you have any do you have a rant for us today? Yeah, he keeps skipping my rants, man Let's do it Let's do it We'll we'll give away Do you want to do a rant while we're doing this or do you want to do a rant after? I can't rant without we'll run after we'll end the rant after the giveaway We'll close with the glitch rant. We'll leave on a high note It's like it's like a it's like a drop of the mic, you know, okay All right, here we go. I am pasting in there. We go. This is everything as of right now 140 entries There's 134 people so some people didn't want to get in but that's okay Here we go And the winner $50 gift card Bruni Thank you to things bruni make yourself known Oh, yeah Give it away. Give it away. Give it away now What do we got what we got up make sure you we got people complaining that it's rigged It's rigged. I don't even know who bruni is It's rigged. It's yeah, it's constantly rigged against you. Congrats. Congrats So, no, I haven't seen bruni yet You just need to you just need to talk real quick just give us something proof of life Hi, not tag a ball Yeah, but I can't I can't tag bruni in the chat Nope Yes, basically Um, you guys five seconds Nope, nothing. I'll be your bruni All right Spinning again, here we go Here we go. Here we go. Sorry. Sorry bruni $50 gift card for two amazon tell me to you from things thanks dot com goes to Oh We know she's here. I saw her earlier. I know I know she's here Well, here's If you cut class early abby you lose Is she's still here? Is she's still here? Still says it's rigged Come on abby. I know you're here. Come on. Make yourself known somebody let her know Congrats abby You get a $50 gift card brought to you by things dot com Yes, we'll reach out. I'm gonna give uh Uh miss thang your your info show reach out via email and and hook you up with that Uh congratulations and thanks so much to thanks For having us uh are sponsoring us and and being part of the show for you guys, you know For you guys, it's all for you to give back to the community But it is time to get this show on the road and we're gonna finish it off Pooch, are you ready? I'm ready. All right I'm gonna keep it simple. I'm gonna keep it quick But this is a big one and it and I think it applies. I'm gonna wag I'm wagging my finger because I'm so fired up about this This has been a problem for people in the 3d printing community for Since the beginning of 3d printing I think I think we're getting past it but every once in a while I come across a brand I'm not gonna I'm not gonna share the brand on this particular one But but one of my biggest pit peeves with spools is the spool that only has the one Hole On the entire spool like would it kill you to put Two holes three holes for I don't know how many holes you actually need You know go with prusa where the whole thing is holes But I mean like are you kidding me because Inevitably murphy's law is going to state that whenever you you know clip this thing and go to string it back on there That it's going to be like this short And then you'll have to like unwind and then waste all this filament and put a kink in it I'm like come on man. And yes, I know you can print the little clips and you can do all other things, but I'm like Just put extra holders on your spool. It's easy If you're making man if you're manufacturing a filament and you're doing this You are persona non grata in my house my friend And I love it. That is uh 100 true. Um Sorry, we got backwards for a second. I was Do I guess I know a drill bit will solve the problem the 3d printing clips will solve that binder clip Is it yes? There's a ton of work arounds Okay, but uh, you know I just I just put to put more holes in there every other spool Yep, it's inevitable that you have 14 inches too much or like not enough and you just can get it in there Like what are these two? What like these ones where you see like the loop the loop hole I think this must be like a holdover from like a different material on the spool, right? Have you ever seen those before jim? Like this kind of hole where it's a slot It's just a slot. It's a slot. I'm like, why why is there a slot? I think maybe that was a bad injection mold or something. I don't know That is great. But amen. I know a lot of people in the chat. We're feeling your pain and uh I definitely feel your pain too. I hate that. I hate it. You can never have enough holes It's inevitably the hole is always just a little further away than the wind is and you got to go all the way back to the last hole Yeah, my pet peeve too. Yes. I love it. Well, I tell you what now everybody's asking what the wrestler name is You know I think I think we have to go with the extruder. I mean if that That's has to be right. I know there was a bunch of really good ideas Uh, but I think just the extruder. We're gonna I tell you what we will give you One minute for everybody to drop your wrestler name for me Oh, yeah And we'll watch him right now before you know at the end of the show, but uh Congratulations abby. Congratulations. Uh everyone else who's won and everyone else who will because again, uh, Things will be with us for a while. So that's gonna be awesome. Um What else what else we got coming what else? Well, I you know big things my friend big things, but we're not ready to tease them yet So, you know, stay tuned. Uh, watch us on the twitters. Make sure you're following jim and I rep court here The edge attack there And uh, we've got some awesome stuff to talk about coming up. Thank you so much to our sponsors. Thank you so much to our Uh viewers our donors all our orders, you know, uh, we appreciate you There's some funny ones here. Yes. We definitely appreciate you the cell you're older Uh, that that's pretty good. Um the nerdy extruder Uh The extruduminator. Yeah. Yeah the spleen All right That's the funniest one I've seen greasy jimbo Oh god, so I So after I tell you what we're gonna have some fun with this after this go on twitter Tag, uh myself and pooch and hotmakes and let's post all our let's post all our uh Uh Wrestler names and see how many people we can confuse just by they don't don't there's no reference to what it is Let's throw Tech at rep cord hashtag hotmakes and like your name and I'll tell you what we'll do I'm gonna collect them off twitter and then next week we'll announce a winner and I got a prize for you How about there's so many good my brochure from kanosha. I don't know you're not anywhere near kanosha How are you? I don't know It's south. Yeah, but it's you know Pooman hey, I hey at least someone realized the foo man Beals be all stashed. Maybe I like that Beal to shame. I love it. So good. What's twitter jake jake from save farm doesn't know what twitter is. That's funny Uh, I mean kanosha. Yeah christ is in kanosha. But but yeah, let's have some fun with that Like no context at all just at the edge of tech at rep cord Hashtag hotmakes and then the wrestler name That's it. Like don't post anything else. There's some really good ones on here man I love jim brony still. That's my favorite and deal deal stash or whatever Uh, oh christ travis. You can be my brochure from kanosha there. That's awesome Thermal runaway. Mitch had some really a really funny runaway Yeah, let's see Harden nozzle j Okay, the final layer. All right guys, we got to get going for the day, but thank you guys We'll have some fun with this. Uh, if you're not on twitter, I don't know get on twitter or something but Good for twitter jim if you're not on twitter get on twitter. I have no idea everybody. Good night everybody We really appreciate you guys coming You know, thanks every monday 6 p.m. Right here at central and 4 p.m. Pooch time Hashtag hotmakes everybody do it do it Nice. All right run that outro. Bye guys. Have a good night I got two cameras. I got two cameras I got two cameras and i'm using them tonight. Uh, that was a great show guys. I love this Oh, we're live Oh my bad. Bye guys