 Welcome to Watch It Weekly Wednesday, I'm Jill and I'm gonna show you this fun technique with motion. We're gonna make motion slim cards and I want to show you a card that I made with this runner and I was like I want to make him running like moving and so I went ahead and made this one with a slit in it and so he is moving by himself so you know he can go backward and forward and my grand kids love this so I want to show you a card done with the legendary ride suite and making this and showing you the technique of making this. So we're gonna first use our stamp and trimmer. I'm gonna use foam adhesive strips and they come like in a long sheet and I just cut them and let me show you how to do this so we're gonna first make our slit. This was a mistake right here this was like my first attempt at this technique and I made the slit too narrow so I'm gonna go ahead and put this on my trimmer here and I'm gonna go to the one inch line with this side of the card so I'm gonna take the actual blade and I'm gonna look down at my card and I'm gonna say okay I want to do a half an inch in so I'm gonna go ahead and take this little line right here and start with a half an inch in and I'm gonna press down and it will go through the card and then I'm gonna go all the way to this half inch line to from the zero to right here and I'm gonna stop there so right there. Then I'm gonna move this over three eighths so one two three and I'm gonna make another line so if you can look right here I've got one two three eighths and I've lined that up now I'm gonna go ahead and flip that over right where it was before and push it down go all the way across again to the half inch line again and I'm gonna open that up okay then I'm gonna take just little snips and I'm gonna snip these two so that we have that channel made for our card and if they don't match up it's okay they can have a diagonal at the end it doesn't matter so I've got my channel for my motion and all you're gonna do is measure this and do it a quarter of an inch smaller so I have a top piece right here and then a bottom piece so it's just perfect because it goes right there on the top and the bottom so let me go ahead and put those on it's the ready to ride DSP paper I love it because it goes so good with this sweet there's so many different designs and I already ran this through this metal pale eight 3d folder and it's one of our silver foils so we've got the slit there and now we're ready to go ahead and stamp I'm using stays on to get bright black on here just checking to see I've got it and I go ahead and stamp this part of the motorcycle down and then I'm gonna do ready to ride it's your birthday right here okay I'm gonna go ahead and punch the ready to ride it's your birthday because I'm gonna kind of attach it to the motorcycle and I'm gonna go ahead and do this it doesn't matter if the the bottom part is perfect on this because it's gonna go behind the motorcycle I went ahead and punched out the lasting label punch and cutting this out with the dye machine and it's the ready to ride dies I ran the flames through and this part of the dies too and this is fun because it just cuts out just the chrome and I went ahead and use some of that silver and you can see right here the silver it's kind of like got a little purple tint to it this is then the silver DSP it's got three different brightnesses of silver if you look on the back I attached everything to the back and the reason why is because when we pull this to go ahead and run it through to give the motion that's why we want everything attached so let me show you how I attach it for the motion okay we've got our card right here and we've got this so we're gonna want it to go right in this slot I'm gonna put my motorcycle right where I want it and then just open the card and kind of grab it from the sides and I'm really looking at the wheels so I'm gonna grab one of these and I kind of want it to only go where the wheels go so I'm gonna go ahead and put this all the way through to where the circle part of the wheels go and then I'm gonna cut it because I don't want it to go all the way to the end of the wheel so let me show you that so it goes like this and then you're gonna peel that off and once it's peeled off I'm gonna go ahead and put it through on this side now I have to have something on the other side to be the buffer and that's what this is it's just a half an inch piece and it's gonna go ahead and actually it's more like three-quarter percent inch and it's gonna go on the back side of the card so we're gonna go ahead and put this through in the slit oops we don't want to get the adhesive on there just yet and then we're taking this piece and just putting it in the center and this makes it so it can go back and forth on our card so we've got that motion going now how can we do that if somebody doesn't know that that's it well I went ahead and took a little bit of window sheet and I'm gonna go ahead and use a glue dot on both sides of the inside of the window sheet and it's gonna create that motion for our card so just doing a dot and then I will go ahead and put that inside that area because it's clear it's not gonna show and then they can grab that and make the motion go back and forth so right on it's your birthday look how cool that is let me show you a couple different options and that's the way it looks from the back this one right here was done with just an exacto knife so I did the first one on one side and tried to do the second one it was a little bit harder to do you had to have a shorter piece of the foam going there so it can do that but went ahead and did that it was just like an experiment but I really like this one where it just goes straight back and forth and that's the way it also goes with the little runner so here's the first card that kind of got me the inspiration and isn't it fun to be able to to do that interaction with the movement back and forth instead of having it just like this it's just really fun to be able to have that motion in your cards hope you've enjoyed our slim card ideas with the motion if you like any of these products click the links below so hope you've enjoyed our watch weekly Wednesday and we'll see you next time