 Hi everybody, my name is Alexander and today I would like you to give you an introduction of the micro-relatest remote access solution called PlanetEBug. This unique streaming platform has been developed to meet the needs of people who work remotely and cannot share the single piece of hardware with others, engineers who are holding webinars or trainings and are limited by the number of hardware they can share or even customers who are interested in trying new technology or developing their applications without having to buy any piece of hardware today and now they are able to rent it. So how all of that can be possible, right? To answer this it will be best to explain first what the PlanetEBug solution is made of. So the PlanetEBug solution consists of embedded hardware side, set of side which consists of IP camera, Wi-Fi programmer debugger called WholeGrip and desired embedded boards, MCU boards and Peripherals you would like to program, user side which requires a Nectar studio IDE installed on your computer or laptop to allow in parallel streaming and programming of the embedded applications remotely. And last but not least is the internet as the medium then connects these two ends and provide access from any location in the world. So what the remote user needs to do is to just open the Micri Nectar studio IDE, select one hardware setup alongside the application he wants to start programming or debugging in a lifetime or remote hardware and start playing. To learn more about Micri PlanetEBug solution or to request your own custom hardware setup please visit our PlanetEBug page at themicri.com. Thank you and bye.