 Yeah, I'm gonna get ready and get everything. I need to get this Everything off of here to do the tank. We'll do the tank next because I don't want to start it up right now, so Okay guys first thing we got to do is we got to get this off and this off Okay, this I've already took one screw out of this side over here Because there's one on each side. There's one here. That's got to come out just a Phillips And there's one Right down here that has to come out, which is a Phillips now the other side This piece is broke on it Right there, so it's missing so we don't have to worry about that but in order order to get this off Okay, of course one I have to take our we're gonna have to take our gas cap off We have to take his luggage rack off. Okay, there's three bolts that hold it holding on their Allen wrenches Allen heads Now I'm gonna have to take this off because I won't be able to get to that that back one. See so In order to take this off there are Four screws inside here There are Phillips head screws, but on the bottom it has nuts 10 millimeter nuts on there So let's put you up in the stand And I'm gonna go ahead and take them out now since those aren't going actually screwing into plastic I'm gonna go ahead and use my use my bower on it made for all different kinds of bikes, so Different scooters. That's why there's so many holes in here so if you're Yours is like cleaner a lot cleaner than this one you can usually tell that over The old bullfos word, but if not just put a little mark Auntie and then you'll know which ones they go in self-explanatory You're up real simple bags are in here do is I'm just going to close this up take this off And there we go all my screws and everything are in here. So we can take These three out like I said that These are three Allen heads I said there's one two And there's the third one there. So let's get our wrong Medicinal purposes Yeah, yeah, yeah, you you caught me you caught the bear All right. Let's see There we go. Let's move. I believe I think there's a metric. So let's go ahead I've got these marked. I think Yeah, the emfor metric or monkey So it looks to be about Six millimeter six millimeter grabbed half-inch drive ratchet so We need to grab for now We need to grab as you use this one and we can also What else we can do here Yes, we can use the bower on them once once we get them loose. Let's get you in the stand Yeah, close you need to be for that I have to go super fast, you know, I lose Because it's kind of a special Type of bolt and they are metric. So sure you probably make anything work But it sucks if you lose something like that. So you got two shorter ones to the longer ones and There's our luggage rack Okay, I'm gonna take these other two screws out on the side over here That one up here on top and that one down at the bottom. Let's see if we can get this thing off of here Now what I'm probably gonna have to do guys is my latch for my seat Okay Now it hooks in To the side right there. So what I'm gonna do is I'm gonna go ahead. There's a bolt here and a bolt here And I believe they got weld nuts on them so cool. So I'm gonna go ahead and yank them out real quick. So That way not going to have any issues we're not gonna have any issues with Breaking this cable We can all come off one now what you can do when you got something like this You can put your screws and something like this Put it back in there or that way you can't lose them back you out here to loosen the side trim panel here We already took that screw out now now in here This back piece here there's two screws on it see one there one there it goes up in there Okay, there's like that you take them two bottom screws out and then you'll have a screw in here Now if yours has yours will probably have both sides. I'll do this on both sides. This side's broke off on this side here But do it on this side too. Okay? Take that screw out Now I took this screw out too so it can move there. All right. See right there. It's just a fillet That way you can pull that back and once you pull that back. There's a hidden screw right there You have to take that screw out in order to lift Slide this back and lift it up. Okay. Now let's lift this up get it out of the way be careful I think I just said it before but be careful of these Older bikes because the plastic is brittle especially Hot climate weather so lift that up. I'm going to take That piece off so it could come off in one piece also. Yes, the centerpiece does Come off. It's got screws on the other On the underside of it right there's four screws and four screws right there and these two side pieces You can buy these separate if you have one that's broke you can buy them separate or you can buy a whole kit This over here freaking load of cobwebs here Okay, so it's looking like we got a bolt there bolt here. Well, not there's a nut Looks like this nuts gonna have to come off There's a nut there and not there that holds the tail light assembly in Not there. Oh We got nut here bull here. It's the same on both sides Now looks like because you know this has to come off the top of here in order to get this tank out So what I'm going to do is they're 10 millimeter because I'm going to take them out I'm going to go ahead and unhook the lines and I'm going to take these screws out at these nuts bolts out Let's get this up out of here. Make sure you unplug This is your fuel gauge here your fuel gauge wire Then follow it down It comes down and around right to there. So make sure you unplug that Okay, I showed you in the last one how to unplug the headlight hard to do one-handed. There we go Now the fuel gauge is unhooked Okay, and that should be the only thing you have to unhook on this other than the fuel lines that is so All right, so let's get these off of here and get the lines off And I'm going to pull this tank up out of here for you guys. I'll make sure slightly just slightly pulled back on that and Then this will slide up and out It's like that now they slide up out pretty easy because the two side ones have got these slots that gives it That way it can slide up and out. However, you need to go with it. Okay, so there's that There's two lines on this one yours may vary But the two lines the line with the filter on it is the line coming from your pump And one without the filter the little one It's the pulse line that makes your pump pump fuel. We're also going to take this off Now we should Be able to finesse this up out No, let's see if we can See down in here Let me grab flashlight I don't remember this thing being that dirty when I first got it, but it may have been I don't know if you can See down in there and all it Yeah, see it's kind of brown back in there so it's got Another thing you can do to shake it around. Okay, you hear that there's stuff in here. Let's see what's in There's rust coming out. Oh, yeah Rust coming out of it. That's going down in my new carburetor so We're going to clean this out So what I'm going to do first of all is I'm going to take fuel gauge out All that consists of is prying this up enough to get that wire out of there and then just tapping this Now they make a tool You can turn this with and this just turns like a quarter turn until these Line up here. Okay, and that'll come right out of there. So You might be able to get like a ranch on here Or a big pair of needle nose pliers and turn it that way too, but I'm going to take that that out This is essentially the fuel pump Right here. This this gets a pulse it pulses with vacuum Like that from the engine which there's a diaphragm in here that goes Back and forth really fast and that's what pumps the fuel out of here So I'm going to be taking that off too. All that does is you loosen this here and that'll come out So I'm going to get that done and we'll look at the inside of the tank when we can get a better view down through there Just split my fuel gauge is split So I'm going to be very careful of this. I think I said fuel gauge But this is actually the float for the fuel gauge. So I may try to repair that It was what that does if you I explain this to you when I did the fuel pump on the truck What that does is that's on empty and as the as you fuel it up that floats up and That'll read full empty halfway, whatever. So that's how that works Be careful that again. Don't try not to try not to bend this wire part Because it could give you a false reading either way But the the fuel gauge does work and see down in here Don't know if you guys can see or not but there is some crud Down in this tank Not too bad there, but if you look back towards that back, I don't know if you can see it but Trust me back in there In this area here, which is the lowest part, which is where the water water is heavier than gas Which water would land that corner and this thing saffron a couple years before I got it So I should have checked it. I assumed it was a plastic tank and I was wrong So there you go. So I'm gonna get and pull this out and then we'll talk about how We're gonna clean this this next day At these beads here Blue tank out real good. I'm gonna take these beads I like to use they have a Polishing rocks, but that's not what these are. These are just those little rocks you buy and put in a Fountain or a fish board or whatever. I'm gonna dump these. It's got a few of them Not seen to find a tape that one cuz nothing's gonna come out I'll find something or something to wrap around here before you get this all mounted in there up inside here. Okay Make sure that's still okay. It seemed to be pretty pliable, but a little iffy so make sure you put some gas in here and Before you get it all mounted in cuz you seen what kind of a pain it is to get out And make sure there's it's not leaking. It's leaking It'll be leaking right around there. You'll see it Probably right in that area So I'm gonna check for a leaf. I have this bolted clear in yet, but it is it stuck on them I got a sticking on these two little Studs sticking up here so that way it doesn't bounce out or anything. I'm checking for leaks. I see no leaks I got this running off of my boat battery down here see the jumpers and Let's see what happened. This thing hasn't been run. Oh my goodness Maybe a year. Well, maybe less than a year at least nine months that I know of so let's see what's going to happen here Is it a fail or I got lights? Fuel gauge is working so on empty. I only put just a little bit in Just in case but just enough to start let's see what happens like it still may be starving for fuel a Little bit. I didn't warm it up but and This is not also I didn't fill it up because I'm not running high octane in it. They want you to run What is it 90 octane? These things do run hot it's air-cooled so They do take a beating but I Also have down here Let me show you that I think you can see that yeah down there. I need to hook up. That's for my air cleaner my breather box Okay, this This is supposed to hook on there But as you can see it kind of got flattened out it popped itself off and that's really hard to breath so I'm going to have to soak it in some lukewarm water and I'll get it put on there and that's probably going to help it But I still think I may have a little bit of dirt in that carburetor though I see nothing leaking out of it now so I may have to pull the bowl pull the carburetor and pull the bow off the carburetor and Check the situation there, but what I'm going to do now is I'm going to put this thing back together and You know what I'm going to leave it to I can get to the to the carburetor and You know see outruns from there if not then I'll go ahead and pull the carburetor I'll show you how I clean that but I think it's going to be alright after it warms up after it runs While it may knock some of that whatever's in that carburetor loose if there is anything in there I did pull the We can't see this in here, but There's a little bit of fuel down inside this cup. I did pull the line off while it was running Held the line into this bucket and it was coming out clean the fuel was coming out clean, so I'm good there Because like I said this has a fuel pump on it so you can do that and it was pumping fuel was pumping a good stream So I think fuel pumps alright, so I may just need to do some tweaking with it But I'm gonna get this put back together Let's go for a ride. I just got to get the The banjo bolt from down at the bottom once I get that and then I cannot put fluid in blade it out And that's pretty ready to go other than cleaned up got low beam, but that's okay turn signals work Horn works for this one. Don't forget check out my patreon page swing past say hello and Remember she bear the myth the man a legend. I'm gone for now guys. Thanks for watching. Thanks for all your support Take care. Bye. Bye now