 All right, so I'm going to jump in now and do the next part which is preparing the surface For our did you see the yellow car and the yellow cup and yellow glasses and the yellow knife? So here's where we are. We have filled up this whole bit by bit It looks awesome then we did our final top pour just on this area and we're going to do one like last sand over the whole thing to Make everything totally level And I'm going to do the top and the bottom just to make everything perfect so lots of sanding here I'm going to use this belt sander which makes it so much easier than on the bottom I'm just going to put just a sealant on it just a varnish or something just it'll be fine like that'll look great and on the top We're going to do our final perfect pour on the top and then we'll be done so To start I'm just going to take off all of this tape Including right here where we have our piece of acetate right So watch how this peels off so nicely look at that see and that's why you put it there Look how nice that is beautiful So I'm going to sand the heck out of the top and the bottom till they're perfect. All right. Here we go Are you excited Jeff? Well, oh, it sounds fake because the last one out. All right. Here we go You excited Just go. All right. Here we go At the top this will take a bit longer, but we'll get there here goes awesome. That's it perfect. So everything is perfectly flush And that just helps to get the dust off of the Sander Joanne is going to take over again and do our final final top coat Then we'll so we're going to tape it off again, and then we're done. Looks great So we are ready to put our final coat on this beautiful tray it's sanded right down to the wood Okay, so we're going to put our final coat on I've got everything I need here. It's already taped on the bottom I've got my torch my toothpick my silicone mat my spreader. I've got mine Cover here for when I'm done. So I'm all set to resin. I've mixed one part resin one part hardener Mixed it well for three minutes stirring the sides in the bottom And we're ready to pour. I'm going to start in the middle here So you see how the where it was sanded. It's all sort of cloudy and scratch But that is going to come up clear clear clear once this resin is on here and here's Grab my spreader here, and I'm just going to start pulling the edges Okay, and it's okay if it runs over the side. I've taped it on the bottom So I'll just run my gloved finger over the sides if we have any resin that spills over This is going to look so so so pretty the art resin really really brings out the Beauty of the wood it just makes it glow. You can see all the grain Yeah, look at the center. It looks so awesome run the gloved hand along the edges Move it out. All right now. It's time to torch Okay, bye bye bubbles There they go So I've got my toothpick handy So I'm just gonna have a quick look here and see if I missed any bits or if there's any good to dust It looks absolutely beautiful. I'm so excited. So we're gonna cover it up And I'm gonna come back maybe in about 10 minutes and just run my finger along the edges once again Because just to help get rid of some of those drips make life easier tomorrow And then again tomorrow once this is cured We're gonna flip it over and just do a really really thin coat of resin on the bottom side to finish it off And it's gonna look so beautiful. Okay, so we'll cover it up and We will see you tomorrow Here we are and we're at the last step now of our serving tray. So this has been curing Look at how beautiful it is. It looks gorgeous Really like glass. It's so beautiful So the last step now, um You can see it's all kind of scratched on the bottom here from being sanded on the on the flip side So we're just gonna turn it over and we're gonna put a final Rub of resin out of full coat We're just gonna rub resin in with bad gloved hands on the back side And you can see here they're like all the drips got caught on this painter's tape Which is awesome and the sides look fantastic So I can just pull off the tape and pull off all those drips Okay, and if you have no nails like me, uh, this is a good time to pull out your exacto knife Here we go Perfect Okay, so we got all the little bits of tape off and now we're ready to put our final coat of resin on So I've got my resin here all mixed For three minutes and we just need a little bit because we're gonna rub it in now You could also use a varathane to finish this off, you know something like This kind of thing you can get in any hardware store The thing is that these are really highly highly toxic and I don't know about you But I would way prefer to use the resin that's non-toxic and safe for my health So that's what I'm going to use. It's up to you Put some on my gloves here and rub it in Look how rich it makes the wood look at this is so beautiful Okay, so this is our last step. I'm gonna cover this up and morning. We'll see the final final reveal. Okay, see you then Hey guys, we're back with our finished piece of wood here and look at how gorgeous it is If you remember we filled up this hole with layer upon layer of art resin Look how beautiful it is and not only is the wood glowing and it makes the most beautiful serving tray But in case you're wondering art resin, it's absolutely food safe. It's non-toxic and certified by the FDA There you go. Bon appétit