 Hey guys shabber 1,000 here today. We're going to try to see what's wrong with this clock That was given to me. I put a battery in it, and I noticed it's not working, right? I do know that something was dropped or dropped on it. That's how the glass got broke so Let's take this apart and see if we can find out what's going on with it. Okay guys, so what we're going to do I Changed the battery. I'm going to take this back off of here where monkey's got some stuff up there So I know this is a good battery So let's pull Let's pull this out of here Removing the hands if we can I've never had one of these clear apart before I've replaced them But I've never had them clear apart So It's gonna be a first for me here as in taking it clear clear apart I'm going to take these hands off. Let me grab a Little pair of pliers pulls off. I'm gonna put this back on I'll set it up over there. Hope I don't lose it. It's gonna reach in the back of here I'm gonna hold that nut and I'm gonna spin the clock out of it There we go to loosen it up a little washer there. We don't want to lose any of these parts them Setting on this right here Now I'm going to move this clock out of the way now we're going to check this and See what is going on with it? You say you can fix them, but This is a tiny tiny deal here. I know you can't hear it, but it is running. I can hear clicking, but That's not moving Well, it is but it's There's nothing there, but I do hear it clicking. So let me get sat down here I'll see if I can get you a better view and We'll take this thing apart Okay, guys, I forgot to hit record. Anyway, I took this apart. All it does is just clip in It's just got two clips one on each side down Some of them got a third one right back here by the battered compartment, but as you can see here This happens to be the problem. Look, it's actually falling apart in my hand So look at that. I don't know if I've got I've got another clock, but I don't know if it's like this one But I'm gonna go get it. Look at all that. That's it's just Chromaline apart those are all teeth from that thing. So let me go see if I if the other one if that other clock I've got it's got the same the same thing same kind of setup and We'll see if we can't fix this one or maybe fix the other one and we'll go from there So hang tight now as you guys can see this is totally let me back you out here Totally a different style clock Big time so I don't know what kind of battery. I don't know if that's a if this is supposed to take a C battery But it's a 1.5 volt which that's what this is so we can put it in and check it. It does seem to be Working See that in there. Okay. Well, let me All right, let's let's just go ahead and Take this one apart. Well, I don't know if my hands will even fit on this one Just one down. No It will not and I'm missing the second hand off of this clock here Here's that hand will work our hand I don't know If the minute hand will fit Here's the minute hand. So if I put this in here Let's all first And run along Memory card in memory space again. So I'm gonna what I'm gonna do is I'm gonna clean these contacts up and Get some memory on my card And we'll go from there. Okay Okay guys, so I don't know if you can see inside there It seems to be moving. This is pretty is a pretty elaborate setup on this one This thing it's even got you can turn up and down to slow it slow it down or speed it up and The hands will fit and I got the second hand to fit on here now. I got to do is figure out what? What battery this takes I don't know if it's a C cell or what? We'll have to see get it All right, so let's get this put in the clock and see and We'll time it and see if it works. Okay Let me go get the clock down here And I'll be right back with you. I want to take the battery out of it Yeah, cuz see that that just looks to me like it's It doesn't say just says Japan and 1.5 volts Down in the bottom, but this is a 1.5 volt battery So, you know, it might be a C battery. I'm guessing but Anyway, let's get this put in our clock Let's make sure if it's about the same Distance, I don't know if it'll fit But let's see. Okay, that's I'm gonna bring the clock over and we'll find out Okay, I don't know if this is going to need this part or not because seeing how it's a different clock But let's go ahead and put this in here If it'll fit. Oh, that fits nice. Okay. Now let's stand it up here Now we're going to put our washer on Can't use that water Okay, so I'm gonna take this Put this on here. We can't use that other washer because it's too small This is a bigger shaft so monkey message You guys can't see nothing again. All right, put this on just like that there Now we're going to put on the hands Okay, we're gonna put on the Our hand we're gonna put on The minute hand which I'm going to have to a little nut on it hold that Here's this thing. It's tiny guys How little that thing it does have a slot cut in it, but it's a different size, but I'm hoping yeah I think that that will hold it Now let's put our second hand on now I'm gonna reach around here. I'm gonna put this battery in here Whoops and it should be working Okay, it is now. Let's let this set for say I don't know what you think. Let's let it set for five minutes and see if it's gonna work if it works good Then we'll know it's working. All right. I'll be right back with you guys Okay, guys, so let's see how well it does. I think I might have started it a little late Yeah, it's pretty close Yeah, that's pretty much on the money Yeah, it's right on the money guys so we didn't actually fix the clock but We did What we did was we didn't fix The old clock inwards, but we did fix the clock by putting a different Clock unit in it. So there's a lot of things I want to do on this clock guys What I want to do is I want to put some nice Chilac or something on here. I want to leave all the imperfections in it I want to leave the little nicks and dings and I want to put some glass in it now I thought about see what you guys think of this Putting some excuse me a pop in the way Putting some LED lights in here Maybe around the the door frame or something But thought about putting some LED lights in around maybe the edges because you won't be able to see the edges That well, so I thought about putting some LED lights in there Maybe something up here on the top right there Like a little knob or something. What do you guys think? So I think that's what I'm going to do with it, but we did get it fixed So I'm going to go hang it back up in the garage for now and I'll keep checking on it But I think it's going to be okay. I do think it needs to see a C-cell battery, but you know that's working for now And that's what I'm going to use monkeys picking me up some seabelt C-cell batteries For a another project. I may do this evening. So it seems to be working good seems to be Keeping time pretty good. So I'm going to set the time and we'll hang it up in the garage and Let it run for a couple days and make sure it's going to run away. If not, I'll get me I'll get me the clock You know the motor and stuff you can buy these real cheap online You can buy them anywhere pretty much, but you got to make sure You know because these these These can be different shit, you know Falling apart on me as we speak but You know the hands where the hands go on they could be different But if I get one with some nice hands like that, I'll just change the whole thing out and use the hands and all But we'll have to see so let me let this I'm gonna go and put this up now and I want to say thanks for watching Thanks for joining me in on joining in on this and Again, let me know what you think about this There's a little magnet right there that holds this door closed. I don't know why it opens, but I guess just for looks but Anyway, so that's pretty cool But yeah, let me know what you think about just putting some making this shiny leaving the dings in it and Putting some small LED battery powered LED lights in there. All right. Shea bear the myth the man legend. I'm gone for now guys Thanks for watching. Have a great weekend. Bye. Bye