 All right boys and girls, thanks for coming back by the channel today We're gonna be do something nice easy quick little modification not always the cheapest thing But you know when we're doing these big bad custom trucks, what's always cheap what I'm talking today. It's tail lights We're gonna be doing tail lights and a third brake light as well. I got from a really awesome company I'll be telling you guys about it and showing you get the difference between the factory ones that I have on here even with LEDs in them and Custom LED tail lights. All right, so sitting here factory. This is what we're working with. Let's go with the running lights first There's a running lights Got brake lights All right back up lights Of course those are LEDs so they're bright as shit already, but there they are all right turn those off and Then let's try our cab light Yeah, not really impressive So if you guys have been looking for tail lights a lot of the manufacturers that come out with these things are Just trying to throw out, you know a bunch of different numbers letters lumens this and that whatever A lot of it is design that you guys like and that's you know kind of what I went off of But I also wanted a really good quality LED functioning tail light and third brake light assembly if you guys have looked through you know They've just bombarded you with thousands and thousands of different kinds plus my uncle's brother Kenny He does like all these custom tail light assemblies, you know spray paint the ends up. Yeah, whatever, you know I want something this quality something that's got a warranty to it LED function and it's not going to make my turn signal, you know flash fast So it's got to have the correct modules that go along with it So let's see what I picked out. I ended up going with a set from recon They're a little bit pricey, you know, you guys can check them out They run sales every once in a while, but you're going to be running in the area of like 200 250 bucks for a set of good tail lights. So here's the ones I ended up getting They are a smoked Outer design they've got the LED all built in up here. I you have to use your existing Reverse light which I have an LED bulb for that LED is for the running so and it has the C Channel running lights with that our LEDs build into that as well. So we'll get that one put on and then My third brake light I ended up getting also from recon The third brake light right here. I ended up not going with a smoked lens I want with a clear lens, but a black That ground or the black inside portion to it. It's all LED as well You've got five LEDs on each side as well as four really bright LEDs in the center section as well so I think these are gonna be pretty badass and Let's get these put in they're super easy to install and All it takes is two Phillips screws to your existing tail lights out if you guys don't already know that You probably should but that's all it takes to get them out. I'll get the tail lights swapped out real quick And shit it is legit fucking Crusty-ass spider's nest Lights here the inputs are gonna plug into the existing light bulb areas inside your sockets Plug in right there, and then you're gonna reuse your little marker lamp bulb and your tiny little Reverse or your reverse light bulb, which I would recommend you got an LED one also and before you even move on make sure You put dielectric grease in here It's building things full because yes these you know kind of are in your fenders But that is not mean it is weather sealed you got it installed and one thing I do want to be able to point out to you guys to make sure is there is instructions in here with this Make sure you follow the instructions when you go to plug the little plugs into the light housings into the Little plugs they do matter which way you plug it in if you plug it in wrong you're gonna blow a fuse I did it I cut it out. Yeah, I know Everybody laughed the mechanic, but you know what I make mistakes too get excited start plugging stuff into the wrong hole That might have been what she said, but you know all right. Let's try these out. Let's try the running lights There we go Let's do some brake light Turn signal and reverse There we go All right now. Let's back up and do a comparison because I still have the left side in turn your reverse off and Just the running light So you see the difference That one to the factory one and let's try to turn there hazards hazards to the factory And what would be There for that one, which is a turn signal and the brake light factory one off on and The after mark went off On so in general, I do really like that smoke lens look to it Looks really clean and crisp. It fits real well hardware works So I'll get the other side put in and we'll see what the whole finished product looks like All right guys. Well, that was a real quick easy little list of modifications here for the truck We got the tail lights in we got the third brake light in Everything was pretty simple and easy Make sure you follow those quick easy little steps that come with the instructions all of those real blow fuses like I did One other cool thing that I wanted to bring up to you guys was something that everyone had been asking me for the last couple of months When are you gonna come out with stickers or magnets or some kind of fanfare memorabilia or whatever? So I decided to come out with some vinyls. So I came out with these couple of ideas We got this one is my rust belt mechanic Got that one in six and a half by six and a half right around that size So I'm gonna be running these on a Facebook for sale page I'll have those and then I'll also have this other one that I'm gonna put the picture right now Each of those will be for sale over on my Facebook page They're gonna be 10 bucks a piece and every single dollar that you guys give is gonna go right back into the channel I'm gonna go towards paying for better cameras better equipment better parts better tools Better everything that you guys are gonna really enjoy and love from here on out. That's for sure so cruise on over there I'll leave the link in the description and I'll leave a little card up here for it and Hopefully you guys enjoy these vinyls and Grab the set for yourself Thanks again for tuning in today guys. I really appreciate all the help and support you've given me I'm just clearing almost 3500 subscribers now which I didn't think I was ever gonna get there But we have and we've got tons and tons of more awesome content coming out for you guys Very shortly stay tuned in for that one turn on your little bell notification So you get notified of that make sure to check me out over on Instagram And Facebook at the Rust Belt mechanic. Thanks for tuning in today guys appreciate it you guys stay awesome