 Welcome to this episode of Door Hardware Nerds. I'm Mia Merrill and I'm a product manager here. Today we're going to be unboxing the new Corbin Reswin CLX 3300 series. What you're going to notice first is the label is now in blue and that is so if this is on a shelf it's easy to distinguish from the CL3300 series. Let's take a look inside. So first you're going to notice the installation instructions and you've got your door template. Then you've got your strike, your lock body, levers underneath. You've got your inside rows. You've got your latch and screw packs right here. Let's open this up. All right, you've got your latch and strike pack. You've got your three bolts and then you've got your latch. We're going to open the insert. You can take a look. I'm going to pick up the lock body and show you that. Okay, so the components are going to come to you loosely assembled. So really easy, remove that inside lever, remove the inside spring cartridge and then you're left with the outside assembly in the lock body. If you need to adjust for door thickness you just take this part off. You can turn this, make the adjustments and then put it back together. It's going to come from the factory set for one and three quarter inch doors and then you'll just put it back on. Now, when you're installing into the door you're going to put the latch in first and then when you slide in the outside assembly you want to make sure that it's properly seated. Then once that is installed you're going to put your inside cartridge back on. You're going to put your inside rows on and then you're going to put your inside lever on. So I hope you guys are as excited as I am for these to start rolling off the production line and out to you. I will see you in the next episode.