 Hey guys, it's Kevin. Just a quick video show my friend at Azerbaijan how to do the continuing in-system for TS-6320. So he can show me how to make some moves on the dance floor. I put a detailed link of installation above. This is just a quick run through how to do it. Here's where you put the tubes in. The tube go underneath the printhead. On the bottom of the tube put some double-sided tape. And on the top you want to lubricate a little bit and put some grease or something. I don't want to give you a firm measurement how long the tube will be because it will be according to your printer. You want to reach both ends. And here is how you split the black ink. You only got one black tank so you need to split the black line into two lines so you can fit both black cartridges. I'll put the link to the splitter above. And also you need this drill to drill the hole. The original OEM cartridge refill hole is a little bit smaller so it's hard to put the elbow in. Okay, that's all the tricks. Lying he needs a day of gula. That's from Google Translate. I hope this video is helpful for you and all my friends. Please visit us at www.bchtechnologies.com or locally, Greensboro, North Carolina. Cheers!