 Hey, guys, what's going on? This is Kevin. In the previous two videos, the first video, we made a CS, the continuing system for Canon. And the Canon was four colors. It used two blacks. But we only got a four-color tank. So what I did is I just leave the photo black empty because I'm not planning to print many pictures. And I just hook up with a big black. So the smaller black is empty. And I printed 10,000 pages. And you can see here, there are only four lines. Goes to five cartridges. And after 10,000 pages, I got this. Everything else looks great except just some random place. I got some stripes. I know it's not clogging because you can see the pigment black is perfect, PGBK. And the cyan, magenta, and the yellow, if you see the color, they're perfect. However, on the left side, those gray bars, those are the mixing. When you mix up the color, you get a little bit of a bar underneath. And that was my problem. And so what I thought is because I like the photo black, BK run dry. And when you do the mixing, I suck in the vacuum and then create a band when you mix the colors. Since I've been running dye ink in the pigment cartridges, so I can just split the dye ink into both photo black and pigment black. So I split the black line into two and see if we can solve the problem. System look great after 10,000 pages. All the lines are solid and clean. First, we take cartridge out. Every cartridge look full except the magenta. Magenta is empty. Later on, we find a leak on top of the air hole that we didn't see completely. However, with that, the magenta print 10,000 pages without any problems. We're impressed. Also, we see the line to the magenta is full. That means the line is still supplying ink to the magenta. Those cartridges are going to leak as soon as you take them out. So for the sanity of your mental health, please put them on the clip as soon as possible. I'm going to put a link to the clip above. And if you need any, if you don't see the links, go to bchtechnologies.com and go to accessories and storage protective clip. And today, we're going to use the smaller clip and one big clip. And we see we see the air hole for the magenta and fill it up and put it back to the CS. Now we're ready to split the black line into two lines. So the thing we're going to use is in the accessories, air ball sleeve manifold and washer. Today, we're going to use this mini manifold. So we're going to select two way from one to two. And also, we need some tubing. So we'll go to accessories and tubing. The tube we used is 1.4 millimeter, either A strand or six strand. They're the same thing. Just A strand, you get two more lines. Here's what the mini manifold look like. I'm going to put a link above. At first, we tried to split this way, and it didn't work. We got a Canon's classic support called 5100. There's something wrong, but we don't want to tell you what it is. And you have to guess it out. And we opened it up and our splitter got caught here. This thing is super, super tight. And this is why we need that red plate on top to arrange the tubes. Let me show you what we should do. We need to split the lines further down the line. So we insert a new black tube for the photo black, the little black. And then the other line for the bigger black. Now we cut the original black line here and connect the manifold. This manifold is tiny and fragile. So you should be really careful when you push the tubes. Don't squeeze the manifold. Also, it helps if you warm up the tube a little bit. I suggest just put some water in the microwave for 30 seconds, 45 seconds, and then dip the tube in the water and then warm it up and make it easier to insert. I know you guys are going to do a better job than me. And yeah, this is good for me. And click OK to go to the menu and select a maintenance and a deep cleaning, deep cleaning a couple of times. And see, we got a big key back. What's more important is see the mixing. And see before and after. Before I just see the bottom of the Y, you get a mixing problem. And now the Y doesn't have a problem. Same as I am the old other colors. You don't have a mixing problem anymore. So that fix it. I hope you enjoyed this video and it may solve some of your problem. Yeah, I sold my old company store. And we're going to sign today. My plan is to buy a piece of land so I can go hunting. I want to hunt for boars. I heard that wild pigs, they taste more pork than pork. And I'm looking forward to get some. So if you guys get the land to sell to me, and just let me know. And I'm interested. My next video will be making an automatic water system for plants. And I'm really bored. I got these plants in my office. And I'm going to make an automatic water system for them. Oh, by the way, I'm an anti-gun person. And not because of politicals. It's because the guns are heavy and loud and not efficient. And so I'm going to use the bow and arrows. Stay warm, kids. Cheers.