 What is up everybody? Welcome to this Saturday stream right here on the edge of tech We check out this monster. Hopefully you guys can hear me. Okay, and the air conditioner is not too loud behind me Otherwise, I'll turn it down Dominic how you doing Andrew s local maker, Michigan? 3d printing and painting. How are you guys all doing pop this there? There we go. Boom Got a couple cameras today looking good Sound and look amazing. Well, let me just hang out. Let me just yeah great stream last night Steven awesome to see John on the Stream and answer some tough questions. I was I was thrown out there and everybody else was is to warranty questions and all of the fun stuff We hear you fine ratmaster, how you doing? Yeah, so I'm gonna get into this one pretty quick So this is a This is a cheaty tech I box mono Keep that easy AC cool, and I like it me. Yes. Amen. I could probably turn it down a little bit It's I had it set pretty chilly in here, but I like it That's funny and your s blames Steven for going to bed late That is true. Let's see if this sir. It still doesn't work, huh? Weird. All right too bad So we're gonna check out this monster. This is a big cheaty tech a Mono screen Resin printer. I think it's 8.9 inches Screen-wise and all that good stuff. It's in a huge box. It's super heavy And we're gonna open it up and get it going Check one two. All right good making sure I'm not Two out of sync on my audio here. I missed the stream How you just got here you didn't miss it go back and watch it you can see it on Steven's channel there We're gonna bust right into this because I have no idea how long the first print is gonna take And I didn't bring my knife over here, so I'm gonna use a handy-dandy spatula and And before I do that I need to do something else Let me move this monster over here So I almost forgot to oh you can't see me I almost forgot to start curing this model I Had it drying all night. I should have probably I Should have probably put Use a toothbrush and scrub did a little better, but I'm going for it We're going for it. It's another mini-gym giant mini-gym and This one I Was just doing a test to see if I could fix this Seed maker and it did not change anything. So we're not making a video on that because it didn't change anything Still broken. I found out it's shipping damage I believe the The screw they use when it got damaged in shipping got a skew. So when I did my video I was finding like lines and When I worked with them on that And that's kind of what we found we went through everything and found that it's probably because it hits so hard Something's a little bit out of whack So that is what it is. Yeah, this thing is a monster I'm gonna get it out of this box and so we can Maybe actually see the table here How's everybody else doing on this great Saturday, holy crap this thing is huge. I mean the box What is at least here? Let's see And it's stinking heavy. All right, so there's a couple of things right in the top classic Styrofoam and I'm gonna set this thing on the ground and get it out probably. Let me just see Let me see Holy moly so it appears that It's in here sideways This thing's like a cooler. Check this out. It's washed out pretty hard, but it's like a cooler huge Did you ever finish the light box for you and pooch? Oh The light boxes are sitting right there and The answer would be I did not finish them But I might push myself to try to finish them now since Mondays is last episode But that's okay. I did I got them all printed and I got the lights Did you guys see what llama made me I haven't hung it up yet, but I was pretty cool, huh? I Was pretty pumped about this That was that was pretty awesome and llama made me that and then Andrew s Designed some really cool light boxes I'll show you real quick here So he designed this one. I just got to get the lights in it He designed that one He designed this one Which was pretty awesome and This one here So that's all Andrew s's designs are awesome. I like I said I have the lights sitting over here In these in these packages here, but I have not got them in there yet And just maybe I'll try to get that done this week. I got a lot done this weekend. So My little man right now is that swimming lessons his first one is first swimming lessons with his mom So this you know what this is another FEP So this is an extra FEP sheet, which is awesome at least one in here. I don't know if it's one or two But I don't want to open it and find out unless I absolutely need it and of course The manual and all that we'll go over that in a few Like this little camera over here now. Let's see if I can yank this thing out So so cheaty tech did send this to me but They are not seeing this ahead of time obviously as it's a live stream and the stream is actually sponsored today by fangs and coax oh If I could get it out there we go So we'll get that taken out in a second. Holy crap. This is a huge box so fangs is awesome over three million models now I think and Coax filament is amazing. I've been using some I'll show you in a minute. It's actually hiding behind me But I've been using some recycled PLA that they're starting to come out with it's called coax next and You never know what the color is going to be because what it is is in the beginning of their filament runs and the end of their filament runs They have You know extra scrap and stuff like that. So what they're doing is they're putting that all together They're grinding it up. I believe it's like a sixty three or sixty five percent Recycle and the rest is new new resin brand new resin and It's pretty awesome it prints just like their normal stuff, which is really good Yeah, I know the problem is where so Behind me as you can see it's a little bit crazy right now because I couldn't put my air conditioner in the normal spot because that's where I'm currently venting out my lasers and So I had to put my air conditioner over here because it's hotter and heck especially the next four days are gonna be over 90 And right now it's like 70 something percent humidity here. It's it's like a sawn outside and I want to redo this whole background and I want to make sure you know the clock is seen somewhere and that's where I'm having an issue But the clock is awesome. I really do appreciate it super cool There you go, maybe It's just not connecting there we go. All right, so we got this monster out It's a red and black right away the red acrylics pretty cool. I like the red and black look I see We'll get we'll get into a little bit tighter here, but if I turn this around and do this There is a Network port here USB here on the back is a power switch and a fan Looks like there's handles. I like that in case you need to move it because this thing is freakin heavy on the freakin heavy side If you have questions, let me know, I think I don't know if you can see it, you know what? I just realized something I can stop that scroll See what happens. I'm not paying attention Scrolling around that we're starting soon and we already started There we go so We see here there we go boom That'll give us some more room on the bottom Trying to grab some more members today if you're not a member jump in there If you are a member, thank you so much. I really appreciate it. You can join with a couple bucks a month I Think it's $2.99 and maybe $4.99 or the two memberships Hey never too early for a frosty beverage, you know what? We need to take a moment and thank tripods garage John. Thank you so much for that. Let's see This is this is for you. This is LaCroix Passion fruit water here. Let's see. There you go LaCroix passion fruit water Sergio, how you doing? Hey, there you go That's for John you get tacos You get monster tacos, how about that? Sergio, how you been man good to see you at Murph Great to meet you in person for a few minutes there and I wish we had more time to talk I wish I had more time to talk to everybody. It was crazy at Murph and Hot Like a swimming pool pretty much So let's see. Oh That's not gonna work. That's not gonna work We'll do this There we go. Thank you so much again tripods garage with the monster tacos So this is kind of sweet check this out whoosh Now right away when I open this They might have been testing this I smell resin Very faint, but I smell it Another giant piece of styrofoam Finally made a mini-gym. All right There we go. This is blown out as a mother. Whoa Might have to calm that down in a second. It's just styrofoam anyway But in this styrofoam you can see they packed it very well Everything's packed down in the styrofoam. We have a power cable. Wow, look at the size of this monster Whoo, that's sharp too. I Don't know if you can hear that but look at that edge. Let's see There's a serious edge on that thing And you're back together do it some gloves I'm gonna calm down this camera a little bit Just sit me down now ISO Whoa too much See if that helps Pretty bright over here. Let's see your gloves. It's a little better You're gonna need a bigger screen Yes Trent is in the house This is a screwdriver with it's just a flathead screwdriver. All right some filters and a couple of masks actually I might steal those masks because I Need the thinner ones look at this This came with Cat 5e cable Now I you don't see that every day That's for sure Maker Viking. What is the price of this monster? That is a great idea or great question and in a minute I can go look that up because I can't remember To be honest, I think it's around 499 ish US bag full of stuff a plastic scraper the USB Allen wrenches all the good stuff there another Driver but this one is actually Allen which is nice and this giant piece of styrofoam is Done give me one second here Let me let me pop up the specs on this thing because you know what I was talking to Trent He's in the chat right now Andrew Rogers 599 on Amazon. Thank you. So I was talking to Trent who's um, you know on Amazon right now and On Amazon on the chair right now, and we he was looking we didn't see any other Videos about this thing so that's interesting Let's go see See if I can find some stats Chitty tech there we go so Yeah, yeah, yeah, it's 8.9 inch 4k 4k Let me share this so you can see this I just grabbed the first I Just grabbed the first tab I could find here and let me just make sure we're in Make this full screen. I don't know why it's like that, but that's okay. Anyways for 8.9 inch 4k 4.8 3 inch touch screen Let's see if they have any other good stuff. I could go straight to their Website to but build platform is 192 120 by 200 so about the standard for this size screen um They say that you can do one and a half to two second layers 60 millimeters Yeah, you matrix light source improved resin tank Quiet operation. All right great. So that's that is that 599 on Amazon What you know, let's let's check it out though, you know, let's see if it's So my question is how come no one else has shown this thing yet, right? So She detected send it to me they they appreciated the i-box video that I did and I told them I would do a live stream on this one So that's awesome Here's some how to help some instructions on leveling. This is a leveling paper and Also how to clean the vat after a failed print So I got the instructions out. Let's start going through them and get a first print moving, right? Weird that he don't seem to mention a networking at all. Yeah. Well now the i-box which is Not sitting here anymore. I gave it away to be honest. I gave it to a school But I really like that i-box anyways So or the I mate. I'm sorry the I mate s is the the other one I did from TD tech and I gave it to a school and they're actually using it currently But it did have networking you can print to it straight from the network here And it was awesome. I could I could slice something and shoot it over. I really like that Let's see contents Operation unboxing check check check plug it in it says All right, let's do it. We're plugging it in Hopefully we don't blow up everything Let's see. I'm gonna do another member stream by the way Should I should probably see when everybody's available for that? Pretty soon though, maybe Never know maybe tonight. No, I got to get some stuff filmed tonight, but looks awesome so far so far. It looks cool So looks like my mitt my model over here just got done Done curing good. I printed another mini gem a big one. All right, so I plugged it in Holy moly it came on which is great Let me turn this towards this camera and see if I can get some Better shots here. Well, at least you can kind of see it from there, too. Let's Let's see Kind of kind of maybe if I focus it on there Little bit you can see it. It's better than nothing. All right. Good afternoon evening and morning So it says it wants us to go to tools tools Click manual icon So that's this one and it wants us to raise the Z by 10 Because they're styrofoam under here. So it wants us to Raise it There we go Raising and see it. It's super quiet. It's got two Rails here. Let's see if I can just keep pressing it Good enough see if it goes how much it goes. There we go. So it's got two linear rails here and a big ball screw here Super quiet so far You don't see any play in the ball screw. It does have a floating bearing in the top up in here So there is a floating bearing. It looks like But I don't see a wobble on that that ball screw is massive That's awesome Hmm, so I'm gonna pull this out That's just some extra styrofoam for the build plate Take out the styrofoam check checker uni So let's just check some stuff out. Well, I'm screw this I'm screw this Take that out Interesting so this is our vat here. You can see the reflection off of the FEP there That's a pretty heavy-duty vat it is See if you can hear this it is metal or aluminum or Something it's definitely It's metal of some sort. I'm guessing I'm gonna go for aluminum or something Okay, so what does it want me to do now? Oh, you know what the screen is a monster to Course there's a little Let's see. What do I got? I'm just gonna do this Dust flying landing on my screen. There we go We don't need no dust right any questions while we're going. Let me know I'll try I will try to Answer them, let's see Amazon doesn't seem to have it in the US yet interesting How far does a lid open up against the wall now it's it's all the way open But you could probably make it stop on a wall like that, you know But it flips all the way back if you want it to There's that Robert how are you? Looks like a huge resin trap Maybe One thing I don't see is any There's no like markings min max full how many leaders you're putting in anything like that Something I do notice though if I take you for a journey with this camera carefully You can see Let's see Take you for a small journey so you can see inside real quick So if you look in here There we go You look inside there Right here and here So this is where it screws down and then there's notches all the way around where your bed actually sits down into there So we cannot shift. I actually like that a lot We got your build plate here. It looks like we have some Leftover styrofoam on there. We'll have to work on that but this thing is interesting We'll have to learn a little bit about it how that comes off and All that good stuff because that this is interesting here. I'm not I'm not seeing anything like this before So what the check that out? The screen You know your standard screen there. Oops, maybe There we go a little better so Yeah, I mean So far kind of kind of awesome, right? Let's see. What else do we got? Let's see So There's a platform fixing a screw. That's the two up here that we talked about the bracket the vat network port Touchscreen a cooling fan all the things Print menus it's going through like how to print and all that stuff Set Z zero Okay, so first leveling let's do that Loosen the fixed screws lift the vat and remove it Prevent the film from scratches check to make sure it is clean. Okay Got it Platform is installed tight and in place loosen the fixed screws lift the vat. I already did that good So, let me just click back over here so you can see what's up So did I miss anything like that very nice feature? Yeah, the keys in the vat looks good for sure I like that where it sits down in there Looks like there's no way for the excess to come To the build plate top there might be if you overfill it way too much But if it spills over this is all flush here It's not like sitting up or anything and it's definitely gonna get on your screen So you have to be careful with that Um, Amazon is so expensive Can't find this anywhere else. This is a resin printer nova Yeah, all right, so ensure the platform is installed and it's tight Check check we're installed and tight loosen the leveling screw which Is on the platform And it can move up and down freely Apparently there's leveling screws Let's see Oh, I see they're on the side right here. So They're like right here I'm uh, maybe on both sides there So let's see. Do they give us a big enough they do okay good All right So i'm gonna get this Ah, I like that You get I don't know if you can see that but the handle will go up There's handles here so you can take this off and the allen wrench can go up nicely Through that so you can actually get it in there So i'm gonna there we go. I'm gonna loosen that up and saw it drop Need to do it on the other side here grab a drink of my water. Let me know in the chat. What are you guys drinking? on this fine Saturday I'm drinking water. Oh, this side was already loose So that's interesting So now you can tell this is pretty loose now Interesting Definitely an interesting design on that. I've never seen a Bed design like this. So hopefully it works good. Enter tools click manual click set zero zero Click set z to zero make to make it go to home So before it goes that i'm going to take the leveling paper here And it goes through the leveling steps on here too And i'm going to set that right here Is they're going to use that here And then i'm going to go to uh tools. Let me go here stop Let's go back I can't see so that doesn't help me We'll click it over here. I'm going to turn this so I can actually see Monster mango. All right monster low carb nice modello. All right Coffee yes, I had my coffee a little while ago Um, I just can't see here set to zero Home first, okay, so it says home first So we got to go back and home. I'm guessing how the heck you home it make The platform home Oh, I see So tools manual home There we go So it's going down. Let me swap you back over so you can see this See if I can make it closer to you here. There we go. Now we can kind of see I'm gonna better calm that Down again making biking again. Cindy. I'm how you doing? There we go So now we are just dropping it to home Okay Put the leveling paper on it and wait for the platform to stop Click the one millimeter button and move down one at a time Then use your hand to press down on the platform and tighten the leveling nuts Let's see return set zero interesting, okay so Essentially it wants us to do like a standard process Um You get it all the way down. You got your leveling paper here It's actually pretty dang tight to be honest So we need to set this to one millimeter I'm sorry point one. We're going to go with and go up And just tech so I should be able to pull this out carefully But not push it back in and this is super tight right now Let's see so It's a little better So i'm going to raise it too high And then i'm going to drop it back down We should still that's that's too loose That's pretty Pretty tight there. So then what it wants you to do is press Down, you know on everything so press down Hopefully my arm is not in the way interesting cutie Kitty the cheaty tech shadow six pro interesting um So it says press down on the platform here and then Tighten the side bolts here So i'm going to do that If I can get the allen wrench in the side bolt That'll be awesome. All right We shall see Whoop now i'm kicking you kicking you there we go So i'm pretty much just going to try to fumble through this because it's kind of tight borders over here There we go So then i'll tighten that side a little bit Yeah, that side was easier to get to a little tighten that side Just make sure we're good You want to even pressure so it's you know, so it's even across your screen Then i'm going to just give it a good crank Maybe this one's hard to find There we go Looks good And we'll hope this is down tight enough If not, it'll tell us when it fails Oh, this one's Harder to get in. All right. Come on I'm going from the other side. Well, I turned you too much, huh? There we go Found it on ali express Miss spelling. What how did I miss spell it? So this is identical almost to the cheaty tech Shadow six pro interesting. Okay. All right So hopefully We're leveled now There's that next Go to tools click set z to zero So that's what we're going to do So we'll go back set z to zero I'm assuming that says confirm, but I can't see it Because i'm behind it Confirm good Now Test the function of the LCD so let's raise this bad boy back up Manual 10 I say we get something printin What the stream titles misspelled i box Oh, you know what I see it now I put a u in there, huh? Oops, I'll fix that not right now, but I'll fix it All right. I'm just going to raise that up a little bit We're just going to do a function test tools calibrate next So let's go back calibrate next And we should see the light and we do Awesome It says now we got to put the Vat back in and make sure there's no dust on the screen also put your holes in where they go So that's what we're going to do next Little dust on the screen. Let's take care of that Spelling police forgive you. Thank you I didn't even notice the you Oops I love that I love that it locks in like that and then you can use your Screws here to lock it down dual gear Extruder and still not solve the issue. I'm not sure just wondering trying to print overage tpu it stops printing and the extruder starts popping upgrade to a dual gear uh, what temperature and Stuff it starts popping and it stops popping you mean clicking And what temperature are you printing at? Um, Matthew So there you did that check So let's uh this point Let's let's pop a test. I'm gonna pop the uh pop this bad boy in here Check All right, which resin should I use should I use a red? I haven't used red in a while. Actually, let's see. What do I got here? Not much there I'm gonna use this one So this is a full of mint Got the shirt going a full of mint gray. I haven't used yet Looks beefy. Yes. It's definitely beefy 220 interesting I haven't printed overger overture. I'm guessing you're saying tpu um Even tried 250 it seemed like it's not melting fast enough Um, how about slow down? I mean you're probably gonna have to slow way down to print the tpu I know there's some peeps in the chat who could help you with that too off the top of my head but All right, I just kind of mixing her up. It's been a while I haven't used this one yet. So this is the uh Full of mint gray Now this is 500 grams. So it's a smaller bottle and my guess is it's gonna This thing's gonna drink it pretty dang easily so How do I want to do this? I'm not gonna play with the network stuff yet. I'm gonna get this maybe closer get a decent uh Decent view on this shot of the vat And that way maybe we can talk while it's printing and I won't shut the dun dun dun. I won't shut it While it's printing at least And then we'll do this good great I'm gonna raise it a little higher because I know myself and Probably spill We don't want that though Let's see Yeah, uh a large machine for such a small build So, uh, yeah, it's a giant machine Definitely definitely giant machine blastos in the house I'm trying to get a new stream deck ready from a walkie maker fair. I saw that Um Try 30 millimeter. Yeah, I would definitely slow your prints way down All right, here we go I'm just gonna go for the whole bottle here It's only 500 grams and this thing will definitely hold more than that so Trying the new uh full of mint gray Again, like I said There we go So let me go back. Let me go back Let me go to print. It looks like there's two prints currently um Let's see also switch to direct this on a cr max I mean, you don't really have to have the direct drive I print tpu on my bowden printers a lot, but but I mean, I definitely got a slow way down way way down all right, there's two there's uh A box mono. Let's go into this There's some test files There's a piggy bank And a piggy bank and a piggy bank. How about that? There's a bunch of piggy banks Should we try a piggy bank? I guess we're gonna try and piggy bank Here we go This should not matter up here. I'm gonna get all this off of here later But that won't even be close to the resin so that won't matter CR max trying prusa slicer. They have preloaded profiles for that machine Yeah, for sure try it prusa slicer is The bomb I love it Pretty much use it for everything Yeah, that's what I do So here we go our first Our first plunge is there and It apparently does not like the leveling I did Because it's trying to keep going interesting So remember that time we set the z height and all that stuff Uh, apparently It didn't like it. Let's see what home does How do you hear that? Well that sucks I don't think the uh, I hope that I I'm doubting the screen is cracked, but hey I've seen weirder stuff um, what's interesting is that I set the z height right and Set it to zero like it's said to do And that's what I did. So let's let's raise this bad boy up What stinks about this now is that I got to raise it up clean it And try it all again and that sucks That doesn't sound good. No, it doesn't Now we'll see the build plate resin trap. Yeah Hope not Now we're good But what's what's weird is that I said set to zero and did you grease the ride didn't grease the rod? Did you do it before after the homing? I homed it like it said in the instructions Brought it down like it said Against their uh, what they what they call a leveling piece of paper essentially is what it is And then once you get it to the tightness you want you tighten the vat here And when you do that you Uh set your z so Resin printing is fun when it works When this happens it sucks because now I got to clean that build plate off if I want to actually do this right And then I got to clean that off Drain it or I mean pull the vat out Relevel it and see if it works again after that So that's always awesome Let me swap back over here I'm gonna move this bad boy Over this way so I can work on it without spilling It's got grippy feet on the bottom which is awesome so Yeah, what stinks about this now Is that I'll have to I mean tech Oh man, I could probably Yeah, my PPE skills. Yeah I got a lot into those My thought was I could probably cheat, but I'm not gonna I could loosen these up and bring it back down and then Uh You know go from there, but that's not the right way to do it. So we're not gonna do that We are gonna Grab some stuff. Give me one second some stuff. I need to clean So I love uh silicon mats like this this one I set outside. I still need to kind of clean it off, but Um, you basically can just set these outside. Oh, that's where you washed out. Sorry um, you can set these outside And then They uh The resin will dry on them And you just peel it off Which is awesome Yeah, true story ed Does it have to have the lid down before you started to print? I don't think so. It was just not stopping So there's that All right, let me grab some gloves Hey, how you doing? How are you doing? So we got a lot of fun, uh stuff coming up. I have More printers. I have some lasers We're gonna do um try to do live streams for all of them or most of them I got the sweet cr10 smart over here Uh, so far mine has been smarter than michaels, but Um, I'm also using Prusa slicer with the cr6se Uh gcode This is a pretty awesome print trend Uh, actually in the chat right now Um, put this out on Prusa slicer. It's like a chain mill basket It came out pretty dang nice This was using that coax next um Filament here I was testing that out and in it I had little legs I haven't glued them on yet But you set it on legs and then you can throw like your wallets or keys or something like that in there So good So good Hi We have a visitor Yeah I have to take it apart quick The first print didn't go great Lindsay just walked in She just got back from swimming lessons swimming class Oh, okay, how did it go? Did he go into water? Did he love it? Sounds like the little man loved the water, which is great Oh, you're almost in view so people can say hi Interesting on this One thing I'm not sure I care for Is this allowed it to drip down but that's okay I'm just trying to drain some of this off before I have to clean it anyway Everybody's saying hi Sure She just got back from the the ymca For our little man's first swimming class And he got in the water and he loved it and Tell us about it. Yeah You know, I realized I have a lav mic on so I don't know if they're gonna hear you great Yeah, funny. Can I talk like this? Jesus Holy crap Trent asked how he did Yeah, so should I just talk louder? I used to do that with my kids with Steve and hang on as soon as I can turn this I'm gonna you do me a favor since you're here to my left on the wall is uh Uh, I'm actually I'm just gonna set this down. Hang on. I need some of that. Yeah, uh, like four of those. Yeah All right, I'm gonna set that there. We're gonna let it drain So when I was when I was pulling this off I was trying to tilt it to to help it a little bit and Unfortunately, I dripped a little bit which doesn't really matter because it's just a drop right in the front of the machine here It's not gonna hurt anything, but I hate I hate that I hate that with resin So I will clean that up with a little isopropyl alcohol in a minute So I don't have anything on my hands yet Having fun with kids swimming many years ago. Awesome Carl My parents just tossed me in a lake Now that's awesome You like see you see your blasto You're going in the lake. I'm gonna set that on there Okay Screen is not cracked that I can see so that's awesome Uh, you probably tried to re-level it while it was in the tank. You know I was thinking about it, but that's not the right way to do it. So I didn't um Let me grab some more So anyways, let me come back over here so Lindsay can talk to so go ahead and how did he do he did good He did it in the family adventure pool, which was cool They have like water on one end that's like only a foot Deep and then they have like flashy things and you know how he likes the flashy things But we were in like a smaller little section kind of where the slide dumps you out, but the slide is closed Can you hear can I hear you? I don't know. I think they can hear you. So go for it And he was like, I don't know mind blown on the water. I bet and um The guy teaching the class I guess isn't normally the guy that teaches that class But that's okay because we didn't know what we're doing either We got like some water toys and we went back and forth. We just basically played in the water. Um And then when we were done, I let him go over by the flashy water for a little while But the part I didn't anticipate Was the after part like trying to dry off Like we went they're all prepared. I was in my suit. He was in a suit So we didn't have to worry about that but getting out and trying to like dry off and changing diapers Of course, I forgot the regular diapers every other kind of diaper But the kind I needed In the bag And then I couldn't like they had a little toddler like jump seats In the changing room so you can like set your kid there So he doesn't walk on the wet floor and split them fall, which is great Except he wanted nothing to do with it So I'm trying to like hold him and I ended up just leaving everything on me Putting a towel on the car seat for me to sit on and then we just went home with me dripping wet Nice, but yeah, that would that would be handy for you to come next time to just help with that and you can come Oh, I can nice No one's cares Has both their parents in the water with them and so when when we signed up for this there was only one one parent allowed and So Lindsay was was having fun. She was going to meet her friend there who also has a little one And then her friend couldn't come anymore. So maybe I'll go next week too Lindsay opens some more subscription boxes while we're waiting No Nowhere They were I put them after the video. Yeah, that's where they are Thanks. Thanks for that Thanks for roger. I appreciate that now Now roger you got to go become a channel member Just watch our address on there. Thank you. I don't know I'm just want to make sure this is nice and clean because I don't want any chance of the resin Getting on the screen there So I'm being extra careful everyone out there's probably like why is he using so much Paper towel and everything but you know what I'm being extra clean So the camera's right there the big thing in front of us There's one here. There's one there. You're probably kicking everywhere So I'm going to wipe up this mat a little bit before I put it in the sun And then I don't know what you guys do who print Trent and Andrew and whoever else prints, but I'm a I'm a weirdo like it. I like to grab my stuff And then fold it into one glove Like that And then grab that glove and fold it into Another glove so it's like a double bag You know garbage glove I guess you call it All right, I'm going to wipe this down one more time just because I do not want resin Anywhere near oh She's seriously unboxing stuff Just for the candy. Yeah Nice So I already wiped this plate down really well Uh now I'm not going to lie. There is one spot that is not wiped down really well And that is underneath Here like in between In between there Right in here. So I did not wipe that down great because it sucks to get to but so One thing I do like is the handles. I like the handles there like that Um You know that's that's nice. I'm gonna set it back up here. What did you show what you do? She's having too much fun here with the ring pops apparently You're gonna do the things. All right Three more Michael. Yeah. Yeah. Yeah Yeah, but uh then use three microfiber clogs for one printer for one bed for one Yeah, yeah, yeah, I do I went a little overboard but I want to make sure it's clean I do not want resin on this screen Hey in all fairness Um trend is watching right now and and this actually I'm going to give this to him when I'm done So hey, it's noon. My my uh tornado alarms or sirens are going off Um, yeah, she's got to suck her. She's happy Andrew said Okay, you know what Andrew I should make her finish those boxes for me. She'd be really good at that The box our box is right here I've got this one And this one Well, I need to finish them There's lights that go in them You know all that stuff. That's a great project for you Okay, maybe not She's like bye Lindsay needs to open more boxes because you're way behind. Yes. We are way. We are way behind on boxes Yes, your tongue is blue her tongue's blue Thank you Um in a little bit. I got a I was hoping to have this printing by now, but it didn't go great So we're gonna try this again. So, um So I need to oh look five bucks from andrew rogers Lindsay needs to open. Yeah, you can dance all you want You can dance if you want to You can leave your friends behind As she as she shakes her head I'm shaking my head about those things because I don't have free time. She she shakes her head about Not having the free time to do those things. That's why she was shaking her head Uh Not because you made them Thanks so much bud. I I like to have an idea Let's see. I I'd like to make I have an idea. I like to make on my shapeco. Yeah, so we're trading. Um Trent is giving us his cnc for this printer Trent you probably couldn't hear that but lindsay's like no, he's not I know he would Trent is Trent lives close to me. Uh Trent blasto lives close to us too. I cannot see this Yes Trent is on the stream And I said blasto lives close to us too blasto's like in brookfield area Trent is in like monomony falls area. Excuse me Perth australia one in the morning joe williams welcome Thank you Huh, you know what this is interesting I loosen this to Level this bed here, right? And that's okay. What what's interesting about me loosening this to level the bed guys Is that the One screw was loose I know I tightened it before so that that's interesting. All right, let's try this again So it's loose loose loose. Let's do a home. We're homing homies Excuse me That's a good one. I tried I tried I've been looking at them. I've been looking at a couple different ones just for the heck of it. Um Let's see Okay, there we go So we're gonna try this again. Let's see what you see here nothing because I don't have it turned over there There you go. You see a pile of bad rags on the ground over there. That's good All right, we're down I'm gonna do this interesting So this is like on springs So it is now Push down. I'm gonna go back to my leveling make sure I didn't screw anything up says loosen the screws take out the vat Put the paper down Ensure platform is installed in place and tightened The platform for the fixing screws loosen the leveling screw got it So it can move freely got it tools manual Okay, make to go to the home position check Home position it is in put the paper in wait for the platform to stop click one millimeter move down one time then use your hand to press down on the platform and Hand tighten the leveling nut Hand tighten and oh the other hand to tighten the leveling nut. Okay. So here's what I'm gonna do I'm gonna go to It says One millimeter One millimeter we're gonna go down one Done that's it I'm gonna take my things here. It says hold down like this And tighten and that's what I'm gonna do. I'm not gonna do any more than this I'm just gonna hold this down And tighten We have a screw loose. Yes, that's true You got to have a screw loose, right? I can't see what I can't wait to see what uh This is weird So now that side that I loosened and it was free is tight So I need to switch. I'm gonna go over here, but I'm just this is just a weird thing. Anyways, they went through a lot of trouble to make this bed easy to clean. Yeah This is a true story So I'm loosening this side just to make sure So I loosened this good and it actually tightened it somehow so Now I'm gonna tighten it. Okay I'm gonna give it one like like half a turn tight past where it is just to Make sure it doesn't go anywhere Okay Follow directions exactly Better work otherwise I'll be crying We all have a screw loose gym. Yes so after this click tools Let me see here Tools click set to zero and confirm Okay So go back set z to zero confirm check Now I'm going to go to manual and home And let's see what it does Make sure it doesn't like make some crazy noises All right, it's stopped I like that it didn't keep going So let's do the 10 mils Raise this bad boy up so we can get a vat back in there Let's get this piggy bank started All right questions What do you got for me anybody? We don't have a huge crowd today. So That's okay. One a.m. In Perth again. Thank you so much Trent, I appreciate as long as it comes with training, you know, I'll take that right off your hands Trent does some pretty awesome stuff Let me just do this There was a bug floating in the I'm assuming it was a bug floating in the Vat so I'm going to take this vat. I'm going to put it back under here It drops into place which I I really love that um And then I'll tighten these down again Just a hand tight not over tight though Just like that Check check and check Now if this goes haywire on me again, I'm going to be a little upset So I'm going to do this This will set out in the sun in a second Make sure it doesn't touch me Make sure we didn't get anything on here I have seen some pretty nasty burns from resin and I'm not I don't like to take any chances when it comes to touching it None All right Costs your fingers We're going to hopefully get a print going now. I'll bring this back over by this camera Without dropping it off the front would be awesome See what we got boom kind of Good enough, right? Good enough. There we go Perfect So now we cross our fingers come on work Let's go back Now I'm going to do a home. You know what? Let's do a home Let's just make sure It doesn't blow up when it homing right Because last time when I home did it went crazy. So if it doesn't go crazy this time maybe Maybe it'll be better Hey, that's better It even beeps Look at that All right. That's looking better So then we'll go do print We're going to do the piggy bank again We're going to go I have no idea how long this will take But at least we'll get it started for a little bit and talk For a little bit here There's no real light in here. So we should be okay to leave this open I'm not terribly worried about it um Let me see if it tells me Let's see if it tells us how long This is going to be Looks like it's two hour print So we're definitely not going to stay live the whole time, but we could talk about it Let's talk about it. So we can we can do this So that's what it would look like if the case was down This is up Looks like nice long First Layer times there and while we're doing that Hey, I see something awesome back here by the way Uh dang it Trent This is pretty cool. I see um I can't show you very easily But let's do this Nope Let's do this Well, what the heck That's okay. I'll just turn it off for now We'll go back. I got to remember how to make my picture in picture From this one here Is not how to do it too bad. Okay, doesn't matter. So in the back here where I hide behind this Oh, it's better to get an under three pro or do a normal upgrade that is totally up to you You can find an under three pro pretty cheap these days um, but the under three v2 That's pretty good Right from the factory. Um, let's see Hit the like button. Yes. So so what I see in the back here is the UV light coming back here. You can see the array is actually coming back through the fan Um, and it's kind I mean it's very hard to show you that but I can see it Now you can't see it really it's coming back here And what's really cool about that is that if you wanted to use something like resin laps You need to be able to see that UV light somewhere because it's triggered with that light So I have a feeling we might be able to like attach it to the back here without even going inside the cage Um, but that being said it looks like we could easily get inside the cage on this one So that's good too. And then you could attach your resin laps And get some sweet resin lapses Any questions about the printer? So what I got is an 8.9 screen uh Let's just go back a little bit here See do they give us any like stats? Otherwise, I'll just go in. Okay. So we got an 8.9 screen It is a 38 40 by 2400 4k mono screen It's uh the z-axis accurate There we'll see. I don't know uh suggest a lighter thickness is a 0.025 2.1 millimeters Speed uh suggested print speed is 60 millimeters an hour. It's 200 watts rated 300 or 3.5 inch touch screen, which is not bad um Build volume 192 by 120 by 200 So kind of a standard build volume for a lot of these bigger 8.9 screen printers um Nice that's awesome Trent I have one as well. I just need to get it out and use it um Let's see what else 405 nanometer resin, which is normal Uh, the net weight is 20.5 kilograms. So it's heavy The dimensions of the whole machine 420 millimeters by 65 millimeters by 499 millimeters um That's the dimensions of the whole machine Comes with cheaty Software and I'll get that all installed and going um Let's see resin labs works great awesome jerry. I got to get mine out. It's still sitting back here in uh In the packaging it came in really or uh, where did I put it? Oh, you know what I know where I put it I put it in my um My pile to do my videos to film That's where it is Is this meant for a competition for the Saturn? It's more than twice. Let's see. It's more than twice as much Is it any way twice as good the Saturn is Less than it's 250 bucks. What? This is I think 599 on amazon right now 599 on amazon adam. How are you by the way? adam lives around us too All right, let's see It tells us um, how to take the How to take off of the build plate, which is great The piggy bank model does not Have to add added supports. Okay See after printing wait for residual to come off then use your scraper and get it off If the z axis is noisy lubricate it, okay, don't use sharp objects on your feb, which is awesome Uh, they did include an extra feb, which is great After printing wipe up the platform with paper towel wash with alcohol um Same same so pretty much all the standard stuff In here Saturn for 499 on amazon so We'll do that We got the good old full of mint, uh resin in there right now And Let me just crank this bad boy down. Oh too far too far There we go and boom We just change this our focus records I'm just gonna change how this focuses a little bit and then turn it off. There we go. So Uh 499 is not bad if you can find a saturn. Are they actually on? Saturn is 499. Holy crap. Can you get them right now? Because that's crazy I think that's about right though. I think they're right around 500 bucks for the Saturn, but um Yeah, well the the Saturn was hard it's very hard to find a lot of times so My guess is people are reselling them. Um, get it on Monday. Nice That's pretty cool So, um, like I said, we're using full of mint resin on this. We're gonna see how it goes. I have I have no idea I haven't heard any popping yet Oh, there we go. I saw the fat. I don't know if you saw that but I saw the fat pop on that one. So I think we're sticking So if you watch really close You'll see it kind of like looks like a bubble Let's see if we can see it. It's it's it's hauling right now Boom, there we go right there. It is cruising. What are these it has to be like one and a half Second layer speeds maybe two second tops off to see what their settings are but anyways, uh So we're rocking with this Also, don't forget we have coax So let me just pop this bad boy off Um coax 3d they do some awesome filament and Clearly this one needed a better first first layer Jeez that's rough Now I might have to go back and look at michael's, uh Video again because this looks pretty rough. Anyways, I printed this Torture toaster In coax it does pop everything opens and closes but the first layer is kind of rough um But this is coax next. This is a recycled pla Uh, it is 63. I think percent recycled from The starting and ending runs when they do, uh When they do their filament then then they take it they crush it up and they use 63 ish percent And then the rest is new resin and they make some pretty awesome recycled Filament now the the color is always going to be different because you just you know, but they're not adding any color to it currently So it could be like this green color. It could come out dark. It come out light silver whatever you just never know Um coax mystery is awesome. That is correct. I I have a lot of coax But thank you so much coax for being a sponsor today. We definitely appreciate it. I have some fun videos coming up including one At least some prints from the cr10 that's smart behind me here um Let's see Thanks, thanks is also sponsoring the video today And thanks if you haven't been over there it's quickly becoming one of the fastest 3d print communities out there No ads which is phenomenal. I believe there are over 3 million models now And it is awesome what things is doing. If you like their stuff, you can actually do like a full-size Um augmented reality part. So it's kind of fun. You can play with that on your phone Go to things.com all the links are in the description below You can get my mini gym on things and that's just what I cured here let's see so this Is a giant mini gym and I cured this while in the beginning of the stream So there's that There we go There's a giant mini gym. I did one of these before and I drained it forever on the stream um Pretty good pretty good size mini gym there and That was I cured that in my washing cure plus but I purchased myself from anycubic on amazon as well Let's see Let's see. I bought my wife or tour laser and a qt X pro to get started with her on business. Do you have any advice for her and getting started? um The vice I have for getting started would just be get started do it um The hardest part of a lot of things is just doing it right is just actually starting and And so I would just you know find some models whatever you're going to do with the The laser and the 3d printer there um Grab some some prints grab some models whatever you want something to burn maybe some coasters And just start burning them and making them and putting it on social media Because a lot of friends and stuff will love that I love the coasters people love the coasters and stuff um Damn messy. It is definitely messy. Yes Oh Writing lawnmowers getting delivered have fun. That's going to be awesome. What time we got here 12 23. All right. We're good I I would love a new writing lawnmower. I just don't have a big enough lawn. I bought a used one from uh From someone and that's awesome. Joe. Williams. Thank you so much Is it safe to use a printer with a cover up with natural light affect the print? um No, it should not affect the print with natural light now if there was any uv in here Uh, if I had a black light or uv light or anything like that Definitely don't want the cover up um You know, but in this case nothing the light in here is not going to affect at all Uh, but what I can do is you can do this And that you know, you guys can't see it. It's good now, but You can cover it up. This has red glass on it. I'm sorry acrylic on it, but um Yeah, I mean the light the the natural light in the garage here will or the regular light in the garage here won't work Now if I open the garage doors up or it was next to Anything maybe just bumping the table mess up the print. No, that's debatable Um, it should be okay Obviously, you wouldn't want to do that as much as you don't have to um So I'll be you know, you'd want to keep on a steady strong surface where you're not going to be rocking it all over and stuff like that um Passion and tenacity is the key to a successful business. Amen and a lot of time I mean it takes a lot of time a lot of hours um You know, like I said if it was me You know start burning coasters start burning stuff like that in your laser and maybe print Like a holder for those coasters and stuff like that on your printer and then start throwing them out there on social media. Maybe do You know something that you know your friends there's friends alike. It could be anything and and uh You can find a lot of files on etsy that you can buy really cheap if you don't want to design too much um And and you just start burning stuff and I bet you you'll have coaster sales in no time that that's the fastest thing um a cub Cab cadet cub cadet 46 inch nice I have a small yard I do I I only use it in the backyard and then like the front of the front yard because Right outside in the front yard. We actually it's like raised. It's up on a wall And I don't I can't really drive around it. I guess I could I just You know, I don't take the chance to fall off that wall retaining wall, but um, I usually just push that real quick and then I mow the rest with the rider because I can drink a beer or an adult beverage or a kool-aid or whatever I want. Maybe a pomegranate water While I'm uh mowing And I can listen to music which I do anytime Which is a great transition into My ray con. No, I'm just joking. I do have raycons, but I'm not sponsored by raycon So this has uh some time on it probably about an hour and a half at this point I have no idea. I'm I'm hoping it's gonna work one of the thing Someone said it earlier about resin is that Until it prints high enough where you can actually start seeing it. You have no idea if it's working um, now if you if you have your Settings dialed in and and you're pretty confident and I always I mean the first print is always, you know, the one that's For me the scariest because you never know, right? Um, uh, you know once you've got it dialed in I think you're fine um, is there no smell of the resin so Right now here Currently there's a little bit now. I'm using the full amount. Uh the full amount gray here. I first time I've used that and There is a case fan in the back here that is blowing outwards and I believe that's just for the electronics and stuff underneath um I don't think let's look Let's take a quick look Inside and see if there's any So there are no fans Filters or anything on the inside here There's some email address and info and stuff like that now Uh, I don't see any ventilation like inside except from the very back in the very back here There's like a a gap between this silver piece here and the back Black back plate there and it's very possible that maybe it's like getting pulled through there Um, if I had to guess I would say it is getting pulled through there because I can see down through there but Let's just check out here let's see I would definitely say there's a gap there. It would definitely pull some air through there if the fan is blowing out from the back now Currently I don't have any smell that I can tell because A couple reasons probably my air conditioner has been blasting behind me here Bringing fresh air in and pulling fresh air out. That's how I have it set Also, I have a fan going because I'm warm blooded And so with all this air circulation probably not now earlier Lindsay came in here and she said she um She said she smelled the resin so I'm sure there is a smell if I would leave and come back um Normally I keep these things covered So it's not so bad and I also keep them Um, a lot of times down in my enclosure here with the filters going so But yeah, I really like rob H says depends on the smell Uh, half a beer. I was gonna do a half a beer and I'm done. That's funny Um, you're not drinking fast enough. I think so, um Yeah, normally I keep them like closed like this and throw them like Inside maybe the enclosure here now. The other thing is uh the The one that you can't see that's behind here Is when that's printing. I don't smell anything but when I take the lid off of it, then it's like whoosh I smell it good. What's the best way to reach you to follow up on something we talked about mirf Sure twitch dm works. Um You can shoot me an email jim at the edge of tech dot com I think I have that right here I I check those now. I do my best to keep up with anything that's you know shot over to me Um, but yeah, you can hit me on twitch. You can hit me there Pretty much wherever I do my best to try to keep up Oh Catching you live. Oh la valeria Yeah, twitter. That's what I meant I don't do twitch so that doesn't help. So uh monday last hot makes with pooch He's gonna be on the show for the last time consistently So join us monday 6 p.m. Central Uh 4 p.m. Pooch time for hot makes with him um And uh, this is gonna be a sad show, but it'll be you know, it'll be good for pooch Also starting next Not this coming monday, but the following monday will have angus for makers muse on for two weeks as a guest host And then devon from make anything. He's going to be a guest host. I believe andrew sink um chris cursey Uh, we got some great guest hosts coming up. Um working and working on some good stuff there behind the scenes. Um So that's going to be fun any questions So i'm probably going to let this thing blow, you know keep uh printing And uh, i'm going to get going pretty quick Because we don't want to sit here for two hours watching this thing print. Let's see how long we got We have uh, I lied it says two and a half hours now So somehow the time went up. Maybe I missed maybe I looked at it. It was three hours before But anyways, I will um I'll do my best to post pictures today On the twitter's and facebook's and all that Um when this thing gets done and show you what it was I'm watching the fep again. Let's make sure we got that suction. Let's see I didn't see it that time So hopefully this thing is still printing um once I get a uh, you know a couple of good prints off this thing it's going to go to, uh It's going to go to a home of trend And trend is going to print some awesome stuff and Maybe we'll do a video on all the cool stuff that trend prints with this Uh, oh angus cool guy. Yes. Yeah angus from makers muse will be on starting next Week not this week coming up with the august 2nd and 9th or I think are the dates or something like that and then um Devin from make anything Again and a lot of great time Well, that was odd So anyways, I'm going to get rolling pretty quick here if there's no other questions We'll pop that over one more time for you There you go Nice i'm going to shut this I'll come revisit it here in a couple hours when I set my timer for uh To check on it Video no pressure. Yeah No pressure at all I know you're going to do some you're going to do some cool stuff videos unstable weird But uh, yeah, I'm going to get rolling if you uh, you know, thank you guys so much for hanging out I appreciate it. I know it was kind of last minute and it's in the middle of our summer on a saturday So thank you. Thank you. Thank you so much for being here. Thank you so much to uh To co-ex and things And uh, you know, I can't thank you guys enough for the sponsorships um I was just trying to uh Find a banner I have for that, but I don't have it. So there's that Um But thank you guys so much for being here. Thank you for hanging out Hey, I'm glad we got to see the bottoming out when that when that started hitting And how we fixed that so if you weren't here for that You know how we fixed that is we had to clean up the plate take the vat out Relevel it and start over and I'm hoping we re-leveled it correctly because then we'll have a good print in the end here Uh, but that's an awesome thing to see with these printers Some of them come leveled from the factory, but they can get out of whack This one said to level it for the first time when you get it. So we did The first time it didn't work. It just kept trying to go down and that's you know Awesome. I'm glad we got to see that though. You know that way if it happens to somebody else, you know where to start So that's good. Um Filament order just arrived nice Um Yeah, olaf. I hope that uh, yeah, I hope that helped out another great video. Thank you so much jan g Trent, thank you. I appreciate it. Hopefully we'll get a couple good prints here and what we can plan a time to meet up and Transfer this bad boy over to you so you can play with it for a while and and love it And if there's anything else, let me know guys. I really appreciate it guys and girls We will see you later. Have a great rest of your weekend and uh You know I guess I always say keep printing. Joel has his high five and hug each other more I always say keep printing So do that keep printing everybody. Have a good one Later