kBox4 Pro - Replacing the drive belt





The interactive transcript could not be loaded.



Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Nov 10, 2016

This is how to change the Drive Belt on the kBox4 PRO:

1. Detach the Belt from the shaft by pushing out the pin using the metal key.
2. Take the Belt out from the shaft and remove the Pulley.
3. Make a knot on the Belt so it doesn't slip into the autoretract in an uncontrolled manner.
4. Flip the kBox over.
5. Take out all the Belt from the autoretract, detach it and put the short strand from the autotretact on the kBox.
6. Remove all of the old Drive Belt and attach a new Belt to the short strand from the autotretract.
7. Let the Belt slide in slowly into the autoretract.
8. Put belt through the holes and the locking mechanism. Make a knot.
9. Flip the kBox over, let the Belt go through the Pulley and shaft, fold the Belt around the pin and let it slide back into the shaft to lock.


  • Category

  • License

    • Standard YouTube License


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...