 Γεια σας, είναι Vicky here and welcome back. Σήμερα έχω ένα πολύ εύκολο καρδό και θα δώσω ένα λίγο ρηθ. Για αυτό θα χρησιμοποιήσω δυο διαφορετικούς στραμπέντους από στραμπέντους. Αυτό είναι το ραμπτ-πονσέτια και θα δώσει ένα λίγο πουανσέτια στραμπέντια και όχι να βάζω το σπίτι που βλέπεις. Το καλύτερο είναι ότι έρχεται με όλες τις ρηθίες που μπορείς να κομμάσεις το πουανσέτια σε δυσκορίαν. Και θα δεις πώς αυτό λειτουργεί. Τώρα also going back to using the dye from the Build Errарith Deset. Let's start first by stamping the Pougen Hasetia. I'm going to use my alcohol friendly black ink just because I will be using my alcohol markers to color everything For this flower there are 3 different dyes that you can cut it out, which means that you can cut out different layers and that's why I'm going to stamp 3 times. από αυτή τη σχέση. Τώρα σήμερα είμαι για ένα κατάσταυρο κατάσταυρο κατάσταυρο και είναι ένα κατάσταυρο ότι είναι πολύ δύσκολο να αποκρατήσω, αλλά είναι καλύτερη για ένα πολύ σπέστιο φίλος ή φίλος της οικονομικής. Δεν είμαι να το σκέψω επίσης, επειδή θα έχω πολλά κατάσταυρα και ειντάξει να πω inside ένα κομμάτι που θα σκέψω as a Christmas present. Τώρα φυσικά μπορείς να αποκρατήσεις αυτό το κατάσταυρο κατάσταυρο και θα συμφωνήσω αυτό τώρα. Τώρα είμαι να φυσικάξω τα δυσκολογή των εμπανιστών, εδώ θα φυσικάξω τα λευκότητα και για αυτό θα χρησιμοποιώσω τα νέα αρχαδιά αρχαδιά και μπορείς να δεις τα χρώματα που χρησιμοποιώσω στον σκέψι σας. Τα είναι πραγματικά από το set A. Στο εμπανιστό θα φυσικάξω το κόμμα της σχέσης της λαδιάς και για αυτό θα χρησιμοποιώσω τα δυσκολογή της λαδιάς και σε αυτήν την λαδιά θα συμφωνήσω mainly σε την δύο λευκότητα των εμπανιστών της λαδιάς. Έτσι θα χρησιμοποιώσω τα δυσκολογή εδώ και μπορείς να δεις τι χρώματα χρησιμοποιώσω για να χρησιμοποιώσω όλα τα δυσκολογή στον σκέψι σας τώρα. Τώρα αυτές είναι όλα τα αρχαδιά αρχαδιά από Αλτενιου και βλέπεις πώς θα φυσικάξω από ένα νείπ στον άλλο από κάθε αρχαδιά, επειδή βέβαια ότι είναι πολύ βασικοί που έχω αυτήν την αρχαδιά στον άλλο λευκότητα. Είναι really helps me to stay inside the lines and for these petals I used three different shades of red so I'm starting by covering up completely the petal with a lighter shade then I add the deeper shadows with the darker shade and then with the middle I'm just blending it out now this flower is going to be in layers and it's going to be very dimensional and once I stick the top layer on top of this you won't be able to see the part that I'm coloring now the top layer but still underneath you will be able to see the white areas so I don't want to have that I'm just quickly covering it up without doing any shading or anything just making sure that I don't have any white areas there and that's exactly what I will do with this flower I'm not doing any shading just covering completely all the white spaces so here is what I have this is going to be the first layer the top layer and I did the smudge there but this is not going to matter so this is going to be the second layer and this is going to be the base layer where you will actually be able to see the leaves now I'm going to bring in the dyes and the best thing about these dyes is not only that they are included with the rest of the stumps is that they actually cut out exactly where those black lines are and they don't leave any white space so I'm going to run them through my die cutting machine and I'm going to pop them out and you will be able to see that there are no white areas around these images so they don't have that sticker look that you usually get with those thin dyes on the edges you are able to see the white core of my paper and that's why I'm going all around the flowers with my black marker just to make sure they don't have any white edges and let's assemble this flower so I'm going to add a tiny little foam square underneath the top layer and you can stick it on top of the second layer exactly as the design says or you can slightly offset it which is going to make your flower look even more full now I'm going to give it even more movement with my fingers I am curling up the petals and my flower is and going to end up looking very full now if you don't like all this dimension and you want to send this through the mail you can definitely skip all these steps of adding layers to your flower just make sure that you add shading and you will end up having a beautiful one layered poinsettia and here is where I am going to stick these two layers on top of my base and again I'm going to slightly offset it and my poinsettia is looking beautiful I'm really happy with the outcome now I'm going to use this die set which is called built a wreath and it has all these circles to create a wreath as well as lots of different leaves for decorating your wreath now this is a very versatile die set because you can create wreaths for pretty much every season of course I am going to create a Christmas one for today I'm using a craft colored cardstock and I'm going to place one circle inside the other to create my wreath and then I'm also going to use this tie from the same die set and cut it out a bunch of times from this green cardstock so I end up having four different leaves as well as the poinsettia and that ring which is going to be my leaf now if you want this to be completely flat you can leave that ring as it is and it's going to work as your wreath I'm going to add lots of dimension this is totally optional and you can do that only if you are planning to hunt out this card instead of sending it through the mail but I wanted you to see this idea because it creates a beautiful card now I'm going to place this ring on top of a mouse pad and this is actually the inside foam from my Misti and I'm also going to use this tool I'm going to go all around this ring which is going to turn it into dimensional ring the tool I'm using is by tonic studios and you will find links to everything I'm using today down below the description area just like always now I'm also going to hold this ring with my fingers and manipulate it a little bit now that the fibers of the paper are broken so it is really easy for me to create a ring that is curved and you will end up having a beautiful dimensional wreath that you can stick on top of your card but I'm going to take it a step further and I'm going to show you how you can add beautiful texture on top of that now I'm going to chop off a little bit from this ring which is not going to show later on since I'm going to cover it up with my poinsettia and that makes it super easy for me to wrap around this string all over the wreath this is very quick to do it doesn't take a lot of time I think it took me about a couple of minutes to wrap around the whole wreath and here is the finished result I'm super happy with the result I just love how the wreath looks I'm going to bring in a piece of ribbon and I have a piece of white cardstock which is going to be a panel for my card base so I'm going to place the wreath as if it is hanging from that ribbon I'm going to secure the ribbon at the back with just a piece of scotch tape and now I'm going to secure the wreath by adding some white glue underneath I'm going to place something heavy on top and leave it to dry I'm usually working with Nouveau Deluxe white glue which really dries very quickly so I don't really have to wait for a long time for anything to dry now I'm going to add this white glue again to secure the poinsettia at the bottom of my wreath and then I'm going to add on each side some of the leaves that I have already cut out and again you can recreate this card and keep everything completely flat just don't add layers to your flower or any dimension to your wreath just leave it as it is a simple nice ring so my panel is ready I'm going to bring in my card base which is a standard card that's 4.25 x 5.5 this cardstock is by Tonic Studios and it's my absolute favorite for this season and I'm going to add some white glue at the back of my panel and stick it centered on top of my card base I'm going to embellish the center of my poinsettia by adding some gold Nouveau Drops and finally I'm going to stamp my sentiment I went with Merry Christmas which is a stamp that was included in the same stamp set as the poinsettia so that was the card for today I hope you had fun and got inspired I definitely love this card it's one of my favorites that I have created thank you all so much for watching and I'll see you all tomorrow