 This time we are going to be answering the question of how do you set the date and time sequence on this blood pressure monitor. It's a fairly easy step. All you have to do is plug in the blood pressure monitor initially into the power outlet or the battery. Once you do that, it is going to come up with the memory mode and the date and time on the bottom. To proceed further with it, to get that setup, we need to first turn it off. So once you turn it off, there will not be any indication coming in. And then at the boot up stage, just push and hold down this start and stop button. And you have to hold it down continuously. Once you do that for three seconds, the top right side is going to start flashing. That indicates that the memory selection function has been initiated. Here you can push the mem button to go between two profiles, one on the bottom, one on the top. Once you have selected the profile you need to set, push the start and stop button. And that will change into the date sequence. The date initially is going to be 2019. I've already set it to 2020. To change the date, all you have to do is push the mem button and it's going to start changing the date. And for whatever reason, if you are in 2020 and you change it or you set it to 2022, just hold down the mem button and you're going to start counting up 2049 and then 2019. So 2049 and then 2019 and then you can push the right year. Once you have made the right selection, push the start and stop. So the next thing that we are going to be setting is going to be the date. So select the date. I'm going to set it to August which is eight. Then I'm going to set the date of the recording and to change that, just push the start and stop. So get the date set up. Just push the mem button to go to the next date. And if you mess it up, just keep on pushing it and it's going to start the counter again. So once you have got the date set up and to speed it up, you can also hold down the mem button. So once you have the date set up, push the start and stop. Now you come to the time. Time is in military standard time. So you have to, you have to 24 hour cycle. So right now it's at 18, 19, 20, 21. So set your local time, then push the start and stop to go to the minutes. Once you have got that done, push the start and stop again. And once it is all set up, it's going to turn off completely. Remember, next time when you plug it in, then when you boot it up, it is going to have the date and time that you set and you will be good to go. As always, thank you so much for watching. If you have any questions or concerns, please feel free to contact me. We have a 2SS. Bye, people. Take care. Bye.