 What's up, Mopar Fam? I hope everybody's having a blessed day out there. As you can see we have a huge white box right here from Holley. This is a new modification that's going on Project Storm, the 2012 Torx Storm Boosted Daily Driver Project, and this is going to be awesome. So stay tuned. We're about to unbox it. The box opened up and see what we have for Project Storm. Looks like we have a couple boxes. Inside of a box. Got a set of fuel rails. Holley EFI. Got some hardware right there. Say it must go to this Holley high-round. We're gonna get the plastic off of this girl 5.7 that's in Project Storm. Now a lot of you guys already know we have one on Frostbite and that manifold has been doing us absolutely great. We picked up a huge gain with that manifold in the quarter mile and it definitely loves the boosted setups. So we can't wait to get this on Project Storm and get rid of the hideous plastic stock manifold. This is gonna look awesome. Let's get this box open. Got a warranty card in here. This is gonna be the top said Holley high-round. It's absolutely huge. Gonna be some sexy hemi jewelry right there boys and girls. Now it looks like we have a spacer plate right here for the front and a couple of gaskets. We're gonna leave that in the package. So before we continue I just want to give Holley a huge thanks for getting this manifold sent out to us so that we can do the unboxing on the channel and get this thing on Project Storm as it's gonna help us pick up a tremendous gain I believe for that truck and it's gonna look awesome. So we're gonna get the camera over here. We're gonna kind of go over the manifold a little bit better in detail and also I'm gonna open up one of these fuel rails and you can see how slick those things look man. They look great. Holley EFI fuel rail very clean machined very good. And these are the same ones that's on frostbite and they work great with the Holley high ram and the hemi's this is just this is the way to go. As you've seen you know a lot of people used to do the 6-4 manifold swap and a lot of those people are starting to ditch those and go to the Holley high ramps because they're starting to see that they work. Yeah, now on a ram truck these manifolds fit perfectly. There's plenty of hood clearance. You don't have to change anything you just have to plumb up a few things a little bit differently than the stock manifold of course, but on the ram trucks this is basically a drop-in deal and fits like a glove. You don't have to cut or trim anything. It fits nice. Now if you have a car that's gonna be a little bit different story. They don't have the hood clearance like rams do so you may have to go with a shorter version or you're gonna have to get you probably a cowl hood. Other than that they would fit and they would work fine, but you're gonna have to check into your hood clearance on the car applications. But if you're a ram truck guy this thing drops right in fits like a glove. All right Mopar fam so we have the Holley high ram right here and we're just gonna get the camera in here real close so you guys can really get a detailed idea what this thing looks like. Man these things these things are jam up for the money and for the performance you cannot beat it. Absolutely huge huge game changer for the himmys not only in power and performance game wise, but the appearance that they give on a hemi is just insane. You could have a bone stock hemi take the plastic stock manifold off your hemi throw on one of these holly high rams and instantly make your hemi look like you just got a $20,000 crate motor it is insane how cool these manifolds look and that is one of my favorite things about them is they just look absolutely awesome. Look at this we put the oil cap in right here awesome now for the fuel rails you got two mounting locations so you got two different heights here you can depending on how tall or short your injectors are so they work pretty much with any injector combination that you got. They supply you with all the mounting hardware so the studs bolts nuts everything to mount this thing onto your hemi is in the box the gaskets for the lid which is an o-ring that actually fits around here it's supplied there's instructions and just look at how awesome and big these ports and runners are on these manifolds it is insane huge huge tremendous amount of airflow that's going to go through these manifolds here's the underside machined very well again the one on frostbite has been working awesome no problems no leaks nothing it has been an awesome manifold the other thing with these holly high rams is all the different accessories that's out there for them now you have inner coolers that can be sandwiched between the lower and upper top so you can have a air to water intercooler in between here they have nitrous plates that can fit underneath there and basically acts exactly like a direct port system they got water meth plates that can fit in there the options are endless for these manifolds there's just so many things you can do with these manifolds it's insane not only are they awesome for nitrous and boosted people there's been a lot of NA guys going to these manifolds lately because they work they really do work and they love the upper high rpm band and when you start pairing that with a big cam this is the way to go now on the back you have a bunch of different ports here all right so on the back here this is the this would be the rear of the manifold that would be towards the firewall handful of different tapped accessory ports here where you can run say brake booster line um iet sensor um your map sensor which honestly it goes right here and that's where I have frost bites is right here in this location this would be for your map sensor um but this is where most of your stuff that you're going to plum is going to go in the back of the manifold that's how I did on frost bite now there is a few other things you're going to need to fit this onto your ram truck um or your car if you're doing that stay tuned for the next video as we are going to basically assemble this manifold and get it plumbed and ready to be dropped onto the truck and ready to go and that video is going to include what part numbers you need to add to the manifold to get it ready to replace the stock plastic piece of trash um but just real quick you're going to need a crossover line here to tie the two fuel rails together you're going to need a couple of plugs um you're going to need a couple of a and fittings to make it work and then you're going to need on this side if you're still using a ram with a stock fuel system um you're going to need a special fitting to go on the back of this fuel rail that's going to be here on this side to build a plug your stock fuel line onto the fuel rail so again stay tuned for video two and that's going to be us assembling this manifold and showing all the other parts you're going to need to get this thing ready to be dropped onto your ram so this is part number 300-658 right here this manifold now they have different variations of this manifold depending on what throttle body and uh top hat you want to run vice versa but this part number is basically for the guy that wants to run his stock throttle body and or a 95 millimeter uh standard hellcat throttle body works also but this one you can take the throttle body that's on your himmy now if you got the stock one which i'm still running the stock throttle body that's on frostbite currently still using it this manifold accepts your stock throttle body you don't have to change that it bolts right on as you can see the extra holes here to be able to accept that and then you got your gaskets here and the spacer adapter plate right here so just want to throw that in real quick there you go mopar fam that's the unboxing of the new holly high ram manifold that we're putting on project storm so again stay tuned for video two we're going to do the whole plumbing and all the fittings and parts and knickknacks that we need to make this manifold drop right on to the ram and then next video after that will obviously be the install of it and then we're going to have a couple other changes as well project storm after this gets done will be running an intercooler setup so stay tuned for that as we're going to be adding an intercooler to it um as well frostbite will be going under the knife we've got a lot of changes happening to frostbite at the same time this is going down so we're kind of messing with both trucks at the same time we're changing them up a lot so stay tuned a couple more videos coming for the holly high ram so again i want to thank holly for getting this thing sent out to us so quick we ordered it and got it within a couple of days and also it's nice to have cool parts like this for the mopar community so again thumbs up holly for helping us out as always y'all stay safe out there don't forget hit that subscribe button give the video a thumbs up comment down below what you think about the manifold and take your best guess on what we're doing to frostbite so stay tuned we'll see you on the next one