 Hey, everyone, welcome back. Danielle here. This is our final video for the PerformV manual, and we're going to be talking about the Switch 3 and Switch 6 and how to pedal map with your PerformV. When you have connected a Switch 3 or a Switch 6 to your PerformV's pedal jack using the TRS cable that came with your Switch 3 or Switch 6, you can control various features remotely. In order to correctly detect a Switch 3 or a Switch 6, it must be connected to your PerformV before you power up your unit. If you change between a Switch 3 and a Switch 6, you must power your PerformV off and on again. The default behavior for a Switch 3 is to change presets according to the numbers on the Switch 3. Switch 1 equals preset 1. Switch 2, preset 2. Switch 3, preset 3. You can reassign any of the PerformV buttons to be activated by the foot switch with the following exception, 48 volts, headphone level, and lock and mute, though talk is still assignable. To reassign your foot switches, press and hold the foot switch you want to reassign. Press the button on the PerformV that the foot switch should control. Release both buttons at the same time, and now you're ready to rock. The Switch 6 acts in the same manner as the Switch 3, but it adds buttons 4, 5, and 6. The default controls for the three extra buttons are Switch 4 is doubling on or off, Switch 5 is reverb on or off, and Switch 6 is echo on or off. So that's it for pedal mapping with your Switch 3 and your Switch 6, and that brings our PerformV video manual to a close. We really hope that you enjoyed it, but if you have any other questions or concerns, feel free to comment them below and follow us across socials to be the first to know what everything we're up to.