 You know, I'm so lazy I couldn't actually bothered to unsold it from the board here. So I just cut it Cut it thinking well if it is if it's okay, I can just sold it back on, you know to itself and if it's not then I can I Can just hold another one to the legs that's sticking out of that Pardon me and we'll see where we go from there because Please be broken. Yes, it's broken Yeah, one of the nice things about man, that's broken is knowing that one. I've got replacement I'll probably have to buy some more Because you're not going to do it. I'm going to try that board again Maybe I shouldn't do that. I don't know why it does that. Why it just like you know, busts What's this? This is a 24 volt. Oh, no, dammit. There's a spare for there 24 volt but these are all 17s or so, I don't know What's this 12 7 8 12 7 8 9 and these are free 1 7 so that's not good Maybe I'll put it in the transistor Maybe I'll put it in with the transistors thinking There we go. Let's say Yeah, we all got freedom d8 22 D 8 8 2 is brilliant. So I can just swap on those over because let's have a little look What it's supposed to look like in the meter. I hope you can actually see that meter Just turn it on So that's that's how that looks It's doesn't look very healthy So let's take another one of these Connect it up. I don't know which legs does it It's just a little bit just Easy for connections Give it another retest So it's supposed to look yeah, hey, that's how it's supposed to look Like it's a really transistor NPN. So So so so so so what I did that So so as the first thing I want to do now is just chuck this back together again And all I'm gonna do is I'm just gonna solder this on to those legs there the right way round though I'm not gonna bother with the heatsink on the back of it because Level again Soldering on really do something just to put this on so it don't Burn into my table I just want to stick a little bit of solder A bit of shoulder on the old Leads there just to make it easier for me to Solder to the other legs. You know, I don't see the point in taking out the board. This is a I'm not trying to Get a aesthetics with this that's not gonna work very well is it? Gonna be been on each leg not stick these all together Okay, all right so All right, and we can just Stick it up like that Okay, right, so Beautiful beautiful beautiful beautiful Get that out of the way and all we want to do now is just put this baby back together again That's a dead one, of course That's a casualty for the day This was all good, so let's get me sold right like us on the one like Just to conserve things let's just chuck these Back in the olds Once they came What we want to see now is that this thing's regulating voltage again, and And we're not You know, we haven't completely stuffed it. I Must give it to this little board to be fair I mean, it says that it's got all this protection right and I keep blowing things But it keeps on kicking But then I don't think that came out right. Yeah, the thing keeps working It keeps working, you know, all you got to do is replace the parts, but then I suppose We could say that I could blow the entire board up. I'll replace the board and it be working again but It does say on the description this is off from banggood banggood.com And it does say in the description that this thing is basically the engineer's friend because it never dies and I've Well every time I play with that I kill it so Or I kill parts on it, but it comes back. It does come back. So all right, let's see what we got Right, that's what we want to see is um, I think it was one about 11 and a half volts or something When that popped it shut up to 30 volts 11.5 volts, we're back again whoo-hoo Okay, so this little baby does keep Does keep ticking When it takes a leaking A little bit of vibration through here. Yep, it'll be fun for someone Right, let's just tap it up again. We want to put a load back on now I want to do this battery and this this this light bulb. I want to do this light bulb But I think what the problem is It's from if I remember these uh d882s I think they're they're they're output regulation is like one amp or something So I'm not quite sure how this actually works. This is supposed to be 0 to 30 volt 0 to 3 amp. So we're talking about 60 watts All right Uh, no, we're talking 90 watts If this was running at 30 volts kicking out three amps of power that's 90 watts, yeah 30 times three But there's no way that this is going to deal with that Because every time I put something on there where it just Sucks up the juice It goes It goes it goes it goes Every single time I tried the jacob's lab on it killed it. I tried this bulb before killed it I tried the bulb again killed it Um, I haven't got anything that's like let's say 12 volt one amp So it takes about 12 volts of power. I've got nothing right now I've got a radio, yeah I've got a radio over there on the window. That's what connects up to my solar panel and I don't really want to pull it apart I might have to Oh, I don't know about the radio So yeah, but then we've got to put speakers on it and stuff and Fat for rounds, but maybe that's worth it just to see if it works or not. This is a I'm hoping it's gonna work out because Yeah, we can try a speaker I suppose and see if we can get this to draw a bit of power I'm pretty convinced this is the power leads I've got a speaker connection over there. Yeah So let's plug this in let's put that in there We don't really want it 12 volts. I don't think I think this thing runs at about six volts or something So I'm gonna turn the power down the current limit it will wait to zero Before I switch this baby on And we're just gonna get a speaker connection if I can I think that one might do it And I'm gonna use a speaker from crossing. I'll probably be pretty careful because all these wires are the same color And I can imagine myself getting into a bit of mischief into a bit of a mess If I get these the wrong way around at all, so The same color wise as what's going on to the ac there And the back of that transformer is now what I'm using for my speaker wires So I write I'm not sure what the signal is going to be like because there's got no area on it, but I write so when I turn this on Um after fapping about it, we should get something now that's a speaker wire. I hope It's stereo. So we've only got one solid speaker. Let's see if this works. Um, right so Turn all this down. That's the one dc. I'm gonna put some power Okay, we've got high end nothing blending up just yet And this is saying that it hasn't got any voltage. So I turn that up to let's say Let's turn it up to okay, well it's drawing a bit of power because So that's 0.62345 I want it probably about six and half volts for this to work Okay, so Why haven't I got any sound? Don't you have the jack? Oh, yeah, because that's what happens, isn't it? After you go to the end of this stuff Do you want to try? No, go on. No, okay Mrs. Vanzard, I'm her companion, you see. Okay. Well, she's very pleasant and Very lucky to have such a position the house is looked at Yeah Then I consider myself extremely privileged You're laughing at me. Absolutely not I don't think I've had a conversation with anyone under the age of 50 in nearly five months. So if I talk too much I'm not laughing at you. In fact, uh, what? I've been thinking about you as well Oh, he's getting weird He's gonna propose his unblind love to her I'm just gonna yak off on him Yeah, I can't go to the party but It's about see that. How on earth would you know? You're not interested in my opinion? No What is thankfully and what's nice is it? I know the crowd I That's not bad for no area Christine that's not it at all. All the capable of explaining yourself. I didn't know where you were Um, no one cares. Anyway, so that's that that that that still works. That's good So we've got a regulator voltage. It doesn't seem to like anything Um, just at this minute in time I need to find out a way to wire up that just to that's warm Is that because we've got anyone in around when he shouldn't be? And he's got your so-times raisins and he's couldn't swim Okay, well More need to uh There's a little bit of warmth for but I suppose you know These aren't very efficient. I mean, they're not You wouldn't get one of these One of these transformers for the efficiency It's not they're not I don't think they're actually designed for that. They're just designed to you know, work out a couple of thousand volts very low amped for a magnetron, so But that's that's quite warm Uh, I don't mean it's hot at all. I mean, what would this be like? This would be probably the coldest water you might want to wash your face with in the morning Oh, that's probably just me because I like water in my Even though I do tend to wash my face with cold So, yeah Well, this will be after just keep playing with this and Let's see what we go with it But that is definitely uh Definitely a bit warm No, that's freezing cold If that was getting warm before but it's freezing cold with a bit of heat Heat shield on there There's no temperature on this so Well, I'm going to call that a little success and this is a sort of fix it needs to have some some alterations I probably could take that back out of there And rewind it knowing that I've got the right amount of turns I need really for the power Okay, we've got one lead is missing out the middle. So that should connect it in I wonder if that could be making it warm up a little bit Not sure Okay, it's probably not good just to have that hanging around So Anyway, that's it guys for this so far, I think I'm gonna just prep around all this a little bit more and um Try not to break it And if I'm caught with anything better to show you with it, I'll uh, I'll do that Cheers for watching. Have you got this far there? I'll speak to you soon. Bye