Loading...

Fukushima UPDATE: 28112011 Three Major Issues at Reactor 2 and 3

202 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Nov 28, 2011

r3VOLt23 28.11.2011
Originally uploaded by jrae50021
Please sub, comment, share
1) At reactor 3
The water cooling system is not properly working. Water coming into the system and coming out of the system shows similar temperature.
They assume it is because a valve was turned off. The last time it was checked was 11/19/2011. They don't know why the valve got turned off.
2) At reactor 2
Gas pressure controlling room's temperature has gone over scale.
It's in suppression chamber. Because the temperature has gone too high, heat gauge can not indicate accurately. They say other 2 heat gauges are indicating normal temperature ,but they are about 100m away from the place.
Also, because the point is extremely radioactive, nobody can get close to check/replace the heat gauge.
3) At reactor 2
Dry well of container vessel is unusually heated. At 11:00AM 11/27/2011, a heat gauge at the point indicated 85.3 C
However, Tepco state there is no problem because other 5 heat gauges around that point show 65~69C, which is usual, so the heat gauge has gone out of order, just at the same timing of (2)
The heat gauge is in the highly radioactive place so they can't go to check or fix anyway.
Considering the unusual atmosphere of Tepco at the press conference, Japanese journalists are suspecting they are hiding something crucial again. http://fukushima-diary.com/2011/11/te...
thanks for watching Namaste

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...