 Okay, one of the things I like to do is put in defrost right off the bat kind of get it a little more workable in there This is pretty nice It looks like that's flashing Probably help if it had some insulation on there. I'm assuming that's probably what's going on Well, there's a reason why the Things all frozen up they ain't got a flippin insulation on it See if this clock working Comforting not frozen down there. So I just think it's got issues. I can hear the clock ticking away If you're gonna run 3d frost I like to see them spaced out coils not frozen just this is not one thing I'll mention This does have a cooler before it so the humidity levels are probably gonna be a little lower So it's probably why they may have removed some of the defrost But I went ahead and put it equally that way if the clock gets out of whack Everything will be equal. Otherwise it might be tuned more during the day or more at night not during the day. So it's more equal So obviously this one's one's not running so we're gonna check that out and this one's got a busted frame Okay, so this freely spins What's happened here? This is completely shattered off coils pretty clean. I Can feel it. It's really hot chances are Motor's taking a dump. We can check the capacitor, but either way in this case. I generally just change the motor They're cheap enough that it's not worth taking a chance of having to come back later Okay, we're checking it and she comes in at two few mega Farad Two mega Farad so we're good Motor's junk and she's hot. So Star whinies, whatever. I don't know this one here. We're kind of screwed What I've seen done before as you can wire tie it It's really not a lot you do other than just replace it All right, so it's pretty common motor There's my little bag I use for when I don't need a whole lot of anything special just basics meter Pliers and stuff. So pretty popular little motor for small small regions thermostat that everybody's complaining about Here we go the 96-56. This one works out pretty good. It's reversible This does have the two plugs on it. So you got the really wide one In the thinner one there this one takes the wider So I usually tape these two together so they don't come apart Nothing like to call back for wire coming undone. Like I said, I went ahead and tape this here Got this on place here The heaters were starting to put off quite a bit of Condensation So I made sure I put it back to where I had it at about 22 minutes I would say the termination probably doesn't work just judging from what I see here Now when I hook this together, I'll put a wire tie around it so it can't fall out of place I had to take some bracket out to Get it in there, which that don't even look equal Get one higher than the other so anyhow had to cut off the bolt studs on the backside and Otherwise they'd hit the coil. It's a pretty tight fit, but it fits. I got thinking about it Let's don't have a headmaster. So it has a fan cycle control Obviously that would cause us some bubbles in our side glass. So And the fans should have been shut off is For where what temperatures were in so For all they got a problem fan cycle control to That fans not shut them down touch not even bit Take it down to make sure the rotation is correct. Now one nice thing is the fans didn't come on immediately some means our Delay is actually working. So maybe our termination switch was Was working. I hate when everything's just falling apart. It makes it really difficult to try to do a good job. It really does All right, I went ahead and calibrated it out here got it in super sniffer mode This is the Stratus. Let's see how this thing does. This is the first real-life test we got on it So we got going on Scanner around a little bit here just see Pick anything up. I'm gonna recommend we Insulate the refrigerant lines place the fan cycle control order a new bracket for Fan and we're gonna go ahead and get this head pressure control changed you got to back seat this So that we can remove it So we've got that there now. We can go ahead and undo it definitely use double wrenches They thought just to have a fan motor out and you get here and There we go, let all that off and it's coming back up a little bit. There we go. Good. I Found out why the fan switch didn't work Somebody doubled it up. So they found it bad at one point bypassed it never changed it. So We'll go ahead and get that changed Still waiting on my impact from Milwaukee Thing wasn't even a year old Trigger was starting to go out first. I Ended up giving away both of my impacts to my father-in-law and dad So I borrowed the oldest one back. It's still working, which is pretty sad That one's been through hell and back and still still works So we're shutting her off up to 10 area It's fluctuates down to about two five The nine degree mark and then bars are on for about two sixty five which puts us about a hundred and eight Resaturation that should be fan stays running. It doesn't span cycle during the summertime. So let's see what our Cyclast is doing now. It's still bubbling which It is so we're gonna add a little bit to it which Any humongous deal. I don't think it's super low Right there. We're solid. So we're just a We're just a little bit low So a little bit to it that should be good Stabbing It all that time Out of pound and a half right there Let's still get a little bit cold yet. Let's take her up to Put her in even two pounds Surrounded so you know that TXV was flashing Especially with no fan cycle and it was low on charge both We got nothing there So I'm gonna stop at that Just because that receiver is not very large Finish this one up here Fixed a defrost issue Fixed a bad fan motor They checked it didn't find anything low on charge and a bad fan cycle control. So yeah, all this thing combined It's always something always something our pressures look about right A little high on the head pressure there. I can't come down a touch About 10 pounds shut off 20 cut in so we're about right on the suction Puts on that so we're good there. Okay. I'm a little concerned Thus it's vibrate really bad with our stuff That's picking up a lot of vibration With this wire tie it today's gonna be one of those days where we're gonna Just get it done. I've got to work on their slush machine yet close to me We're good there