 okay guys today we're going to be putting in a new sink but up under here as you can see I've got the valve for the cold water off because this one was leaking now you can put seals there's like a gasket inside of here I don't know if you can see it a little gasket right inside there it was leaking so there's another view of it you can change them but I just went ahead and bought a new one it was 10 bucks so we're gonna go ahead and put this one in that's what we're gonna start with so stay tuned and we're gonna change this sink out put that sink in there okay guys so the first thing we're gonna do is let me get a light on here for you is we're gonna put that new valve in we're gonna take the line off of that one we're gonna unhook the drains which we just fixed remember and then around here you see around here we got a like a straight screwdriver that's what holds the sink down to the cabinet we got to take them out we'll lift that out but first let's go ahead and let's put our new I got a bucket under here and I got a towel just in case so let's put our new valve on here see this comes here in a second this comes with a compression fitting and that I don't think it will need one I think this one will be fine so I'm not gonna have to cut this one off same way with this I'm not gonna need this one but I will save them they're good for the the ferrules here are good for airlines and stuff okay so I'll get this stuff out the way so I don't lose it over here for now now we're just going try to do this without getting in your way this is a half inch to three eighths or three eighths to half inch or whatever I don't know why there's still that much water coming out of there well kind of I do because our lines don't come up through the floor they come down the wall they actually come up out out of the end of the garage they come up across the ceiling you know up into the attic and then down this wall so it does hold it a lot of water so let's get this tightened up here I may have to turn it a little more I don't know how long them lines are on the new sink so now let's go ahead I loosened this one earlier so I'm gonna go ahead take it off now crazy about that tree lemon that's just you guys will see it I'll do a video of it just on this on the cc camp the closed circuit the security cameras you guys remember what was it Thursday I just just do that car Thursday if I get you somewhere where you can see this really not much to see period this one over here I don't lose that I have to take these off whoops these and I'll put these you guys ain't seen none and that's sorry I've take these off and put them on the new sink okay so that's ready now what's going to be next is these things here now all they do is just clip on I'm not gonna bore you with that I may show you one but let me get these taken off and then we'll we'll lift the sink up out of here okay so let me go get my screwdriver okay I know it's not a very good angle but there's a little slot needs you just just unscrew all you got to do we'll just turn them sideways I'll show you that it's turned sideways opposed to that one and that's all I'm gonna do is turn them sideways and we'll lift the sink out so let me get that done sorry about the camera work but I can't have monkey help me because enough room for me down here so or one of us alright so let me do that okay I only had to do six of them because the ones in the back are too close to flip around so it only had two on each side and two in the front excuse me in front so I should be able to just pull your sink out just like that they look like right here and they just slide into a groove in your sink you turn it and that that just goes on like that and you tighten it this way right here with this little little thing right there alright now before I put the new one in you can see how nasty this stuff gets we're gonna we're taking this back splash clear out of here cuz it's no good eventually the whole sink's gonna be replaced but right now this is all we've got so we don't have the five grand to put new cabinets in yet now on this thing around here you'll have I'll show you here in a second but there's like a putty that's supposed to be around there and I don't see any on this and there's none on that sink so I do happen to have some putty so that's we're going to put some putty around there that just keeps any splashed water or anything from going down in to here so that's another thing that they didn't do and as you can see it was straining down that way so let me get that done let me get my putty and we'll prep the other sink okay they're pretty much the same sinks I'm just gonna replace it all the whole thing so that way it'll be a little bit better for and I'll see on this one like this is what I was talking about so I'm gonna have to take these off which is no big deal so let me go get my stuff and then I'll show you how to prep that sink I'm gonna take our plumber's putty I'm gonna take some of this and I'm gonna make just like back in the Play-Doh days I'm gonna take a bunch of it and I'm gonna put right around the edge of this thing then once we get it on there it'll squeeze down and squeeze out and then I'll show you how to trim that now these things are real easy to put on you just take them there's little notches in here every so often you slide them in them notches move it over back cuz I'll be wasting my time because because of this it doesn't you know it's not gonna have room to to clip around clip around that see what they do is this they go on like this and then as you tighten that it squeezes the and I've got this all cleaned up around here but that's how they do that so I'm gonna put these on and I'm gonna make my my snakes out of my plumber's putty over there okay and we'll be good to go so let me get that done and get that around there then we'll set the sink in I may go ahead and put these on here while I've got it upside down that way don't have to do it on my backup underneath the sink so stick with me okay so now we're gonna put these in now there's a little plastic gasket on here okay keeps it from leaking it goes in here like this this is like this now I've seen guys put some plumbers putty around around here you shouldn't have to do that if you do just as or that's bad or this up here may have a crack in it but you shouldn't have to you should not have to I know I'm making a mess guys but it is what it is right you shouldn't have to put plumbers putty on there besides once you squeeze it around there it'll clog up them holes so that's all there is to this I wish these were a little longer and then you just tighten that down same way with this one over here goopy shit cleaned off here now like I said I'm not because once we get our new countertop in I'm gonna be replacing all this stuff brand new myself so I'll be putting new drain in down underneath you know that while I should comb the traps I'll be putting new traps in and it's all going to be new we may even put a new a new sink in because we want a deeper sink so I mean if you're going to do it right correct okay so now these they don't have to be done a whopping tight just give them a little snug that's all it takes a little snug like that because that's plastic you could strip them or crack them so there's that now I'm gonna move you back here got our plumbers putty runner you can also put it around like if you've had your sink out you can see the line where the old putty was while this didn't really have putty had some on the back but he can also put it around there if it's easier for you which I probably should have done I thought about it but I didn't but that's okay to see if we can get this down in here one of them things but that's okay because I cannot sink is in sink is bigger I didn't measure this way only measured this way all this again so I gotta take this out anyway and put in the sink because the sink is further this way longer that way then this one is apparently okay well let me do that I don't know why didn't measure that okay let me do that and then we'll we'll start where we okay guys for on two you just go around if you notice this time I put it down onto the counter first doesn't really matter then I'm gonna tighten it down and most of that will cut itself off so I'm gonna go under here and get this tight and then I'll have to have her if she will clean this for me so I can put that faucet in there so I'm gonna get under here again and I'm gonna put our little things in and then we're going to hook everything well I need to get this cleaned off and then we'll we'll hook everything up let me get under here and get these started well get as tight as you can with your fingers first we're on the right side and that'll be so that'll be tightened down so I'm gonna go ahead and do that and then we'll put the faucet in so there is to that and you can say this stuff guys if somebody tells you all you can't say that you can nothing wrong with as long as it's a tight container sure you can save it that no see this one's deeper this way that one was skinnier it fit this way and it's the same depth here but this ain't as wide back here and that's all right well you can redeem yourself if you clean this off for me I don't what do you want me to use on that wash it wash it no I have the water off some spray stuff so we will have to get a cab for this it's no big deal it's all right all right so there's that's all there is to that and I'm gonna do that all the way around again you can use this stuff over everybody guess well it's dirty well it doesn't matter because as long as you don't have a whole bunch of sand or grit or whatever see you can save that and there's see so what if it's a little dirty cuz install your sink you're not gonna see that stuff anyway so there you go so monkey said she'll clean that for me and I'll show you how to put faucet in we'll get everything under there hooked up I got the base on here I use plumbers putting on that too just do it the same way as you did the sink making a mess here we're still gonna have to get on the side now let's go down underneath and I'll show you how to put this thing on there I just noticed something I had this light for about two years and look it's got a low medium and a high I never knew that anyway it's not what we're here for I've got to get a rubber gasket this up in here will you hold that faucet for me honey in place thank you okay now we're gonna this one's a little different as you can see it's got screws to help tighten it restart these straight it shouldn't spin on just like that because I can I can see I can see me turning that on there but I can't feel it pretty neat huh well I mean okay is it straight where you want it you're spick it and everything on the right side so now I'm gonna try to get that to where I can get all three of them real good now my screwdriver these three screws is how you tighten this I kind of like this setup you just tighten these screws evenly again they don't have to be super duper duper tight but you want them pretty snug so your faucet say your whole spick it's not moving when you go to turn your faucet head you faucet head just gonna grab this can't move now we've got now all this stuff all there is to that and you pull down on there and make sure that's tight can't mix these up they've got red for hot and blue for cold of course stripes on them sure I'm not getting that crossed I didn't I want to make sure that an issue that we had with the other one sometimes the hooves will get caught like around that nice and smooth because everything's pretty much brand new straight so I'm just gonna take it off and start again sometimes if you turn it backwards you can feel it see there you go you can feel it like level itself out you know he showed you guys how to do this thing so I'm not going to show you again I'm gonna hook these up I'm gonna tighten these down you just snug them and then we're gonna try the faucet okay so I'll be back with you in just a second okay guys I had to put the old one back on so we got to take this back tomorrow because it would not turn on it was jammed now we worked it and it is working now but who's to say that it doesn't lock up again in the on position and if I have a leak I can't shut it off it's going back $10 for shit like that okay so yeah for when you pull that out yeah well you want to go there you go guys remember not don't just measure one way like I did measure three ways measure your width your length and your depth yeah top button stops it remember don't don't jinx this out of there like that you see that yeah that's where a lot of people breaking things so there you go so I made a little boo-boo but that's alright we had this issue that's okay this is going back I'm not you know spending $10 on something that that's not gonna work right yeah it's working now but like I said who's to say it's gonna work if I have a leak or I need to shut it off to change this stuff again because it's going to be changed you know anyhow right so and then I won't be able to shut it off so I know she's got a little stoppers that she never had before you turn it don't force it in you know I usually do yeah okay see that that's got to go in that slot down there so you don't force it you know what I mean then you turn it like that there you go there's your stop you didn't have that one right you had it like that hmm see that flat spot it's got to go in that slot you should never have to push her a hard on them okay so there it is guys so that's cool here's the buttons up here and there's your stop button in case you want to move the hose around you don't work with this stuff sorry it took you so long that was my fault that was my fault because I didn't my brain working right but that's okay because I did it everything was perfect except for this way really yeah see now that I look at it but it's only like a quarter-inches one a quarter-inch that way you'll see on the video that's okay so that's all right we're good guys yeah this is what I wanted yeah it's so much nicer to be up so high yeah because the other one where I put it's right there yeah you know this it's too low yeah it makes it hard to get big if you got a deep sink it's okay see this floss it's not really made for this shallow of a sink so we wanted one it comes up there so there we go yeah and this will do for now and then when I get many new cabinets and stuff we may go to another one a different one or you make this one works well we'll keep it and then we'll just make a change of this sink or something yeah I mean if it's working good we'll keep it yeah it's not that old no no and it was worth a lot of money so but that's why I still got the bucket down under there just in case and I know that old one was dripping so I'm gonna keep that bucket under there everything seems to be fine so there you go guys that's how you do that just remember to do your measurements I didn't do my measurements right but that's my fault I'm only human we fuck up so that's why I left it in the video you know it's not everybody's perfect you know this ain't this ain't this old house where Bob Vila does everything perfect you don't see behind the scenes everybody else doing it for him then screwing up to you know I mean we all make mistakes or human mistakes so then you know people don't make those mistakes I mean you could do you could do a hundred but a hundred one yeah you know you're gonna screw up but that's okay guys so at least we know that I am human now and you turn that little thing yeah so yeah the stoppers came with it yeah if I can't get five bucks out of that I'll clean it up of course but if I can't get five bucks out of stainless steel sink you know I mean I was gonna change these things but I thought screw it I mean they're kind of dinged up ours are not see yeah and ours are stainless clear down in here see what I mean yeah this is just a stainless ring yeah that's plastic so that's fine it's good perfect okay me happy I'm fine yeah we go just put a little thing here I mean it okay the sink needs clean we know that guys it's not you know the haters out there can kiss our ass come and clean it for you know right but yeah sure sure get to it but not tonight now we need to eat we're gonna get something to eat and have a drink so yeah so all right guys I'm gonna start working I've got a lot of videos put up tonight so thank you guys thanks for watching stay tuned for the footage of the tree limb falling onto the truck you really can't tell it on the car but you see the truck move you can see it it actually bounced yeah yeah the truck but you can't see hit the car but which was yeah it would have been cool I mean but it's cool to watch something like that happen actually yeah we didn't even think about the camera no we just coming back from the story like hey I'll bet you the camera saw that yeah all right guys say bear the myth man legend golf for now bye y'all all right bye bye guys thanks for watching enjoy the rest of your weekend