 All right, what's up? I did not rehearse any of this, so I'm just gonna go off the cuff and try my best not to mess it up. I'm Caleb, I'm behind the scenes typically. I've been on the last few episodes, but there's a company that I used to work for, CMCNC. They lost, well we lost a good friend last week, about a week ago. His name was Richard Smith. He got in a pretty bad car accident. Some other guy ran a stoplight. He's gone. He was a very important person to us, and he was big into 3D printing. He loved the fact that he worked at a company where he could build 3D printers. He and I built CMCNC printers for quite a long time together, day in and day out, and we miss him quite a bit, but he was a big part of the community. He joined Hot Make shows every now and then. He was a big supporter of the show and everything we do here, so he wouldn't want us to dwell on it for too long. He was a pretty cool dude, but his family has a GoFundMe. His daughter is running it. They've already met their goal, but anything that's extra goes into helping take care of his son, who he was taking care of, who has special needs, and I'm having a hard time keeping my train of thought. Long story short, feel free to check out the GoFundMe CMCNC posted a video that I put together that showed a little bit about his personality and what he was like, and some of you did know him. Some of you who don't, I would recommend checking that out. The GoFundMe is in the description of this video, and I guess I don't know if anybody else knows or cares. I guess this is more for me than anybody else, and I appreciate Jim and Shannon let me do this, but I'd like to have just 60 seconds of silence before we start the show and then just move on. That's it. I don't have anything else to say. 60 seconds starting now. Thanks everybody. What's up everybody? Welcome to Hot Makes. Right here on the Hot Makes. I'm Nerdy J. This is Shannon and this, my friends, is the real Sam Prentice. How are you guys doing? I'm great. How are you? Man, I am pumped, feeling much better and ready for a show we missed last week because of the holiday, and I'm excited to be here. I'm throwing my arms around everywhere, and Shannon would be like, whoa. Yeah, that's usually how it goes between us. You sound a little bit like me, actually, but I didn't make that on having you around last week because I'm right here is my midi, Jim, with his tripod garage hound. There we go. Or garage, depending on where you're from. And of course, now you're getting into lasers. I've got your special glasses as well. I appreciate you not letting my eyes burn out. That makes that means a lot, and I love that version of me. It's very representative. I've got to be careful how I handle it. That's what she said. Shannon, how are you? Oh, my Lord. Honestly, very, very, very stressed, guys. I have San Diego Comic Con coming up, but we're hanging in there. Nice. That's going to be fun, right? I think Shannon is now frozen in time. Wanda has Wanda taken over Shannon's stream. Hi. I don't know what that was. That was my, said no. My internet's still saying no. Okay, guys, if I drop out, I'm sorry. Wow. It, of course, waited until we went on stream too. I didn't want to do this like 10 minutes ago. No, I have San Diego Comic Con coming up, and so that's like consuming my time right now, but I'm hanging in there. I'm good. I'm just very tired. It seems like it's going to be a blast. We have a bunch of awesome comments. Polymaker, 3Ds with us. How you doing? Tripod, how you doing? Yep. Tripod was with me for a marathon, like three hour stream the other night. I think it was Friday night, maybe? I think it was Friday night. I can't remember what night it was, and he hooked. He was hanging out with me doing a laser, but yeah, we're going to talk about a lot of cool stuff tonight before we dive into that. If you want to see any of the hot make stuff that was shown tonight, or we didn't get a chance to see because there was a ton of stuff, check out the link in the description below. It is a Google doc. You can go find episode 108. Holy moly. Also, as Caleb alluded to in the beginning of the show, if you want to donate and you can help the family of the person we lost from CME CNC, there's also a link in the description below. We always appreciate that to help a fellow community member out. I believe Geary might know, I'm pretty sure he was at Murph, and he came and said hi, right? Yeah, I think that was a yes. Nice. I heard ribbit. We're having some technical difficulties today. But so that was awesome. And like I said, if you can help out, thank you so much. Matter of fact, Andrew, thank you so much for $10 in the PayPal house. I'm going to turn around and donate that back to the family. So thank you for that. We really appreciate that. What else do we got, Shanna? We are everywhere, per usual. So we're on Twitch, we're on YouTube, we're on Facebook. Oh boy, that's the problem. I don't have coffee right now. So this was my Father's Day gift, one of them. And then I got home today and my two-year-old decided he was going to start helping me make coffee with our espresso machine. He likes to press the buttons. And he brings his little stool over and he's like, make coffee, make coffee. And his mom or my wife said, you have to wait until dad comes home so he can make dad coffee. So as soon as I got home, they jumped up and he made me coffee and it was acutus. But anyways, what else we got? We got, we got the real, not the fake, the real Sam Prentiss with us today. Someone asked me earlier, are they running out of guests? And I went, maybe. I don't know. No, we just like to take in ratings. No, Sam is with us. We're going to talk about, well, I mean, the shirts say it all, death, race, or action. Thank you so much for the shirt. It fits mostly. And I got a girdle on. Anyways, no, Sam, Sam brings me this shirt and he's like, Hey, I got this, I got this shirt. What size is it? It's like 2x solid. He's like, Oh, you're, you're a large guy? Are you? We never met yet. And I was like, Yeah, you know, do you have 10th size? I mean, usually 10th size. I did. Yeah. But, but no, this is perfect. I think it was like an extra large or something. And it worked out well. Extra small would have been hilarious, though. I would have put it on. I would have tried it. So I'm getting, I'm getting, I do get this question quite a lot. Who's the fake one? There is a fake one. There is a, there is an imposter. And I think I had him as a Facebook image for ages and stuff like that. It's a friend of mine called Giles. And he does kind of this impression of me. And it's interesting, you were doing with the thing with the hands because I do that in my videos quite a bit. So he does that and tells everyone I'm working on my goatee. And yeah, it's kind of weird. But no, it was mainly Jan. Oh my God, Geary, you're looking fierce, my friends. I've got to say. But getting back on, getting back on topic just for a second. Yeah, the handle was taken. So Sam at Sam Prentice on Twitter, but the real Sam Prentice is everywhere else. So yeah, you know, that was, that was kind of where that came from. Really, I think it should be something like Sam Prentice does 3D printing. Maybe that should be a more appropriate kind of channel name. But you know, here now, so Right? Well, I, you know what? The real Sam Prentice is awesome. And I got to ask before we get too far. Number one, my nieces are watching. Hi, guys. And my mom just texted me and said hi to say hi to Jaden and Bella. Hi, guys. Anyways, you were here in the US, you know, for a trip. It was a nice long trip. I mean, like a week, at least a week, right? Yeah, I was there for a week. Yep. Nice. And number number one question. How many pancakes did you eat while you were here? I ate. I would have had seven portions. Oh, my Lord. US portions, though, which are like not normal size. That's right. Yeah, I mean, I was getting waitresses saying to me, Oh my God, I can't believe you've eaten it. And when we returned to the pancake house, the first time we went in there, we went back there a few days later. And it was almost like a freak show. Like they were bringing people out to see me. And I was like, what's going on? This is the guy. This is the guy. The guy what ate all the pancakes? Yeah. So it's weird. It's a weird thing for me, I guess. But I don't know what came over me. And all of a sudden, it was almost like it was a thing. So there were French toast. There was other things that were certainly offered to me. But I was like pancakes for the win. And in fact, I'm glad you've got onto that because this is what we have in the UK. This is wheat bits. So essentially what it is is, is a block of wheat that you put milk on. And you won't like it if there's milk. 50% extra free. So that's what you get with that. Wait, wait, wait. Now, if you're in the if you're in the north, that's like eating a rice cake, you get Scottish oats, and you have to wear this kilt. You have to wear this kilt while you're eating these things that old fashioned. But they're in date. So yeah, so our breakfasts here are pretty lame, to be honest. And there you go. Yeah, that was a that was a that was a good pancake. I remember that very well. I remember that very well. I'm literally like drawn to it. Yeah, we had some fun with it as well. Because obviously I came out and stayed in the vicinity of tripod and his garage. And it wasn't quite what I thought it was going to be his garage. I thought it would be much bigger. That's another pancake. Yeah, okay, I can I can see where this is going. And yeah, so he took me around. And then he took me to Merth. And his hospitality was second to none. And he's a true friend of a great guy. That's another pancake. Yeah, that was that was a good one. That was a good one. But yeah, I consumed a lot of pancakes. And I tried all the other stuff, chicken wings, burgers. There's there's another there that that was a that was another good one. Yeah, that was I found every I think I found every pancake photo. So I, you know, and pancake, pancake photo. Yeah, yeah. It's funny that social media when you're when you're posting pictures of food, I really hate it when people do that or pictures of their kids on the first day of school. That's like a no no for me. And there I am taking pictures of pancakes going, Oh, and the people are going, Oh my God, that's disgusting. And then you're weird. And then this is kind of weird. Oh, yeah. Oh, yeah. That was that was a pancake high. Oh, my Lord, that's all of that sugar. Wow. Yeah. That is like, you know, if I was running for president or nice. Yeah. Yeah. I thoroughly enjoyed myself. It was it was a lot of fun. And, you know, trying out the delicacies of America and things like anything that was world famous or award winning others all into that. As you know, because yeah, that was that was a fun night. I think we talked about this the Monday right after Murph I think you were in the chat though. But I mean, this is much more fun because you're here. I mean, literally we're sitting there. We're ordering wings at was a wings, etc. Some restaurant, I think it's called wings, etc. And we're ordering wings and and you're like, do you know what award it's been? It won. Where's the award? Can I see the award? You know, and and I mean, obviously your your accent makes it much better, by the way. Thank you. But I was trying to find where the heck I know you I know this posted somewhere. But that was that was pretty funny. And I mean, everywhere you went, it seemed like something was award winning or what was the other one? It was world famous. Yeah, world famous. There you go. I mean, the heart, the weird thing about being world famous as I search through the pictures here is that how can it be world famous if you live in the world and never heard of it? Well, that was precisely my point. And it became more and more. And the other thing is what you don't know yet. And I don't have tripods mentioned on any streams or anything. But when I'm in this car and I'm in the driver's seat because it's on the wrong way or the right way, depending on which way you're right, right. We're driving along and I'm seeing signs like and I'm saying, Uncle Joe's beefhouse, 97 X and doing all these kind of weird things. Johnson's like, what is going on? And I'm like, it's the sugar. It's the sugar. Yeah. Not it was good. No, honestly, though, everybody was great. Murph was fantastic. And I think I've made some friends for life. And, you know, I would suggest if anyone wanted to go out to a show, I think Murph is certainly quite a humbling experience. There's a lot of really, really cool and genuine people out there showing their stuff off. There's no kind of egos or anything like that. You know, I had to take a step down. But, you know, you know, the that's that's the thing though, you know, and I thoroughly enjoyed myself and it was awesome to meet all these people and yourself and, you know, Caleb and yeah, exactly. There you go. That's that's the there's me. Yeah. Why do we always do that? I don't know what's wrong with me. I'm not sure. But no, I always look mental. I don't know why. No, that was it was a lot of fun. And I'm glad you enjoyed your trip. I definitely it was great to meet you in person. We had a lot of fun. I think Caleb probably has a video of you like trying to pick me up because I wouldn't jump on you like dirty dancing. And I mean, yeah, you would have died. It would have been you would have been a pancake. For sure. I might have gone Cugby's, you know, that could have been. I mean, I mean, or pregnant. I'm not sure. Yeah. So so Sam, I get up. I'm like, I'm going to go mess with the jukebox and he's like dirty dancing. And I just went back and we come back and like 10 minutes later, it comes on the jukebox. I was like, I definitely had to. And then he gets up and he's like, come on, let's do this. And I'm like, you're crazy. I mean, I'm going to crash. I'm going to break everything. And the thing is, I was just having a really good time, you know? Yeah. And I get into that mode where I'm like, they do cocktails. Wait, wait a minute. They do cocktails. Yeah. Right now. So yeah, that's just the way it goes. No, it was it was definitely fun. It was great to meet you in person. And one of the cool things that you brought with you was the whole death racer thing. So yeah, you have one sitting right next to you. I have. I got mine. I've got three seeing my. I just lost his head. But yeah, you've got three sitting there now. I have. Yeah. This is this is David, three printing nerd producers, one that where I'm kind of working my way through at the moment. Nice. And then I've got the the Benchy Polymaker one that we've got here, which is going to need a little bit of a repair. And then we've got the the other speedy racer that that sort of died a bit of a death. Yeah. This is. And then we got that one. That's the one that I got the Joel head. Yeah. On mine. But it was there was definitely a blast. So what what is it? Where did the idea come from? And, you know, all that work? I mean, let's start at the beginning and then let's tell people where they can get the files because the files are out there. They are indeed. Yeah. There's a Facebook group and everything now. So they're starting at the very beginning. What happened was I went out to fall next in Frankfurt and I was there with Polymaker. They they basically got me a ticket and I turned up and spent a couple of days there. It was awesome. And but unlike Merth, you know, it's very kind of it's be to be business. It's not kind of like a consumer market or anything. Sure. So it was a very different format. I spent quite a lot of time with a guy called Luke, who works for Polymaker, learning about the filaments, learning about materials and understanding, you know, essentially, if I'm going to build something with this stuff, what's the strength quality? What's the material? You know, what's the property to this? Spent quite a lot of time with Luke actually sort of talking about that. Had a really, really good time out there. And of course, I met Joel and there's a couple of photos of me dressed up like Wes Waldo or Wally, as we call it in the UK, hanging around in the background. And we did. So Joel and I sort of hit it off straight away and we just had a bit of fun. And I said to him, look, if I come up with something, I don't know, some sort of racer or or a robot. And I had this idea of the little T-Doo robots. Sure. And then basically 3D printing, nerding that up. And then I got back and I started talking to Michael Badley, who I know has been on the show as well, really good friend of mine. He's a top guy. And I've got a lot of time for Mike. He's an incredible designer. And we had inadvertently started working on another robot, which was a 50% droid, which we had to can due to a variety of different reasons. Anyway, so we had this drive system. And Michael was like, hey, what about if we did something like a, you know, a fighting robot or something? And I said, yeah, you know, jousting. So we just started talking about this thing. And so I get on a call with David and Joel. And I'm like, hey, what about if we made this thing? And it was like a jouster. And I'm, see, I'm kind of like the middleman with this sort of stuff. So I'm the promoter of this stuff, right? I'm the voice of it. So I'm kind of getting out. They're like, yeah, we've got this design. It's good. I'm upselling something that's not even been made yet. And they're going, yeah, this sounds amazing. This sounds amazing. So then we start getting the designs out. And I'm sending them images and saying, you know, this is what we're looking to do. But the idea at the time was, I said, look, in any kind of media or PR format is what would generally happen is the people that are making the content will produce the product. And then Joel would turn up and go, hey, I've made this or whatever. And he was like, no, I don't do that. I don't want to do that. I want to make this. So I was like, OK, then David said, David said, like, hey, what about if we've got loads of people in the community to build these and we have this massive race of the earth? And I'm like, OK, let's do it. I'm an enabler. I love that. So so we kind of had this traction of, you know, we've got someone that's going to be able to push and promote something, which is Joel and a bunch of other kind of makers and people like yourselves. And then there's me that's going to be kind of like the voice of it. Michael's going to be the designer. And we're going to kind of the way it kind of works is people would join up to his Patreon for a dollar. This is a dollar. You can download the files and then cancel it if you wanted to. It's not really about the money. It's it's mainly about the community. And we want this to be kind of like a community led thing. I don't want to be involved with this forever because I want to do other things as well. I've got bigger robots to make. I've got, you know, but the other the other stigmatism that we had as well was around I'm known for Star Wars stuff. And I didn't want this. I keep calling it a droid and people keep saying, oh, have you got the race of droid? And droids are very much to do with Star Wars. And it is a robot. It's a racer. It's a death racer. So we kind of came up with this name and the rest is sort of history really. So Joel's video comes out on Saturday. And as you know, at the Murph event, you know, we have, I think we have five or six races there. The the time limits that we set ourselves were a little bit ambiguous, I think. I think we thought that they were going to be, you know, quick to build and they weren't quite as quick by the time you're getting stuff from Taiwan shipped over and all that kind of stuff. Right. So, you know, certainly we want to try and kick it off for the next one. So I've got a race in Frankfurt, then I've got another one in in the UK. Then I'm going to be back out to the States at Murph again next year. I've already kind of pigeonholed a hotel booking because I'm kind of trying to guess when it's going to be on that weekend. So, hey, David, how you doing? Hey, David, this is your racer, mate. Yeah. So so it was it was great. And of course, those guys kind of got involved. And it's funny actually because I'm part of the video. You can see David. Joel just went gun-ho and smashed into everything and in a certain broke his racer, right? Spoiler alert. But you can see and I've got this video of David just going, and he just sort of let his hands down like he had to just let it go. And it was like, I just want you guys to do driving forward and I want this sweeping motion. And it would have been beautiful. We all know it would have been beautiful. Joel didn't get the memo and he's smashing it into stuff and it just broke apart. You know, funny, funny story. Remember, we he had the drone up and we were just going to drive out and like come back. And I decided I'm going to run into tripods and I busted my my gear. And I was like, pit stop. I run inside thinking you guys are just filming some B roll. We're going to fight. I come back out and the carnage is already done. Like everything's almost over. It's just it's tripod at like half speed winding. The whole time he's like half speed. I'm never going to win. And he wins because everybody else killed themselves first. And then he's still running around like, haha, suckers. And it was a lot of fun. I came back out and I was like, well, I'm just going to start crashing stuff and let's see if we can knock some heads off. And I think at one point I went over my tripod and he was like smashing my head just to get it to knock off. And it was the whole thing was a lot of fun. It was just funny because like we should have been like right here's the deal. This is what we're going to do. And then race time is here. And really what it turned into like B-Roll Carnage. Like there was no. I can't wait to see the video. Honestly, I can't wait to see the video because but here's the thing, you know, we started off like, is it going to be this big thing? And there was a lot of interest, like a hell of a lot of interest, especially on the Friday when you were trying to set up and get and there's people coming over and coming over. And it's like, oh my God, you know, it's not starting until tomorrow. Can we talk about this later? You know, we just good gods, you know, and people were really excited about it. So we came up with this concept design. It was kind of prototype. And we put it out there. And, you know, we sent it to a bunch of different people. And it's funny because like Slice Engineering got it. Lawsbot did a fabulous job on there, on their robot. And, you know, it was it was insane. And in addition to that, I've seen their version two of it now and it looks epic. So long story short, if you go to my YouTube page, you'll see that there's a death race of video there. That gives you all the information of how to build one, where to find it, where to go and all that kind of stuff. So subscribe to the channel, make that happen, get my subs up, you know, and we've got we've got more to come. So the exciting news is literally today I was chatting to Michael and we were like, what can we improve upon? And people are asking, you know, there's one guy on the Facebook group, the death races Facebook group who's building like a 50% one. And this is where this is where you get that community. Yeah, this is where you get that community led sort of freely printing ethic and people change things. And I want people to do that. And that's it's it's and, you know, it's indicative of why we're doing this is because it's all about the community. It's all about doing something that's going to be great. So as you know, the motors in these are 1000 RPM. So Michael's like, hey, you know what? Have you seen these? And I'm like, no. And these are brushless motors with I think the peak current is at, I think it's 88 to 125 amps on the stall current. And these things are insane. And they've got so you get rid of the speed controller. You've got these motors and you've got a gearbox that goes on it. So we go from 1000 RPM to 4000 RPM just like that. And in addition to that, we also reduce the voltage from 14 volts down to 7.2. So the so actually we are looking for kind of efficiency on that. Meanwhile, on the flip side of this, there's two more versions that are being worked on, which aren't death races. These are things that you can ride on yourself. So the next one is the toolbox robot, which you've seen already. And we're just beefing that up, ready for form next. And then once we've completed that one, that's kind of a interim one where we're going to be making, hopefully a death racer that you can actually ride on. A human being full size adult who is the size of a 10. This is going to help. Whatever. So we're going to race Matt Denton and Ivan, the guy with the red tank. He wants in on it as well. Yeah. He's turning to this whole big thing, which is insane. That would be that would be amazing. So I could see like the track portion. You know, Shannon has Wanda on. She's standing on a track version. It's like floating her across the floor. Like you all can injure yourselves and I will watch. Absolutely. And this thing is going to be it's going to be a bit insane. And we're we're looking at so you know, are huge. Exactly. I mean, like these these motors are monsters in here. And what we'll put it this way, I'm surprised Lullspot even moved. That thing was on fire, essentially at the end. I mean, and you can smell it from like 15 feet radius. It was like it was it was it was bad. Oh, but no, I'm super pumped for that. So so as you know, Polymaker sponsored this as well. And, you know, it was it was really cool because anybody that we kind of invited into this because we wanted people to make it, not just go, oh, yeah, I've looked at the files and see what happens. And, you know, we sent it to Slice. We sent it to a few different people. And when they saw them in person, they're like Slice Engineering, E3D, Prusa or like, we need to build these. We need to we need to make these now. And they've got the files of, you know, hand delivered them out. There you go. So Nick at a Polymaker has been awesome and constantly keeping me in in filament. Speaking of Polymaker, I'm going to need some filament for that one, I think. And I think that would be an interesting. I mean, what do you do is like really jousting? I mean, so this so this will be for racing. And the the idea that I think the bigger idea here is this will do. I'm hoping about 60 miles per hour. So this is this is a serious bit of care. This isn't something you'd want to undertake, you know, just for the crack. And we're looking at, you know, racing Matt Denton's Lego XL Go Kart. We're looking at something that's, you know, if you imagine being on that death racer yourself and putting your legs down there and going, right, it's got to be able to fit inside my van. So if I go to any of the events, I've got to reverse this thing out and get into the showground and stuff. Oh, my God. But we're looking at some considerable sponsorship batteries and it's actually called Project Field Crisis because again, it's electric motors, big beefy motors. So so this is the interim thing. So I wanted to go to Merth. I wanted to show a product. And my whole channel is all about, you know, making stuff, right? And all I seem to be doing is all I seem to be doing is reviewing mediocre 3D printers a lot of the time. And I don't I don't necessarily want to be doing that forever. I want to I want to be leading products and I want to be pushing stuff out and working with some great people like yourselves, you know, and getting involved with the fun stuff, is what you're saying, the fun stuff. So I will mention as well, one last thing. Yeah, iPods did win. So, yeah, it's not millennium. What was supposed to happen is it did. We were supposed to do a speed contest. We were supposed to do, you know, agility, a bunch of other stuff. And instead, we just went smashing into stuff. And that was the end of that. So I think I'm pretty sure David can let us know. I'm pretty sure Joel's still working on the video from that, I'm guessing. But I could tell you next Saturday. But I could tell you that this, I mean, this was what happened. You could see the tracks off. So this thing was like at least 10 percent 3D glue or more. Yeah. So is on the Benchy, right? So the pottymaker Benchy, right? I'm behind, I'm underneath Joel, which you're here. Joel's here. I feel like his wife. And then obviously try to put it to the right. Now, last part of that point was obviously repairing theirs. But that was a that was a thing of beauty, an absolute thing of beauty. I was I was definitely I was definitely don't forget David. He's up there. David's there as well. Yeah, David's staying away from the carnage with the drone. But yeah, it was just, you know, speaking of speaking of tripods, he dipped his and he did this hydrographics thing. And that thing looked absolutely phenomenal. There's a whole video on how he did it, like he showed the process and stuff. But there's a b-roll to that as well, where he's just sniffing it and rubbing it and stroking it and stuff is weird. Yeah. But this was super cool. And I love that idea, too, and such a cool idea. Nice work on that one. And he did. He he won Farad Square. He didn't get his head knocked off. He was still driving. The only one I think at the end was still driving, by the way. Yeah. And I mean, it was it was beautiful. We can see you can see this one, right? You have everybody lined up and then there's me. Let's see. Let me look at look at this face of disappointment. My track is in my hand. Like so. So what happened was. I got a little greedy during the b-roll. And I thought I'm going to just run into tripods. I'm pretty sure it was tripod. And and when I did that, I broke one of the gears that the track came off. I had to run back and and screw it all. It was hilarious. But yeah, I left so hard because the face I'm making in this picture just says it all. Everybody's like, yeah, yeah, yeah. And then I'm just like, oh, like the kid in the the fat kid in the background that just got out first in dodgeball. You know, that's that's me. So that. Oh, wait a minute. Hey, you know, Sam. Yes. You were talking a lot of crap about Joel's racer. I mean, rightfully so, because it was made on the bamboo, right? What do you mean, the bamboo? Oh, the bamboo, but I think I think Joel needs a rebuttal. How you doing rebuttal? What do you mean? Whatever Sam's saying is the truth. You know that. Hey, look at that. It's the new bamboo. It's the new bamboo. It's the new bamboo. Still not complying with open source. Yeah, this week at this point. Yeah, Sir Will said this week, but whatever, right? Is it every mention of the bamboo has to be followed by does not conform to open source until they until they they rectify it. And if it's the end of this week, that's great. Good job, bamboo, who doesn't have open source yet. Yeah, I had a thought that you might go up at some point. Yeah, well, I was sitting here and I was like, you know, we're giving him a lot of static on his racer. We're talking about the racers. So I'm chatting him on Twitter, Sam's on terrible. What are you talking about? It was awful. Like I was like, full send break. Yeah, it's true. And it was awful. Let's be fair. Let's be fair, Joel. It was full send break every time you drove it because my bamboo printed your parts all day Friday. You did all day. In fact, you're you're super thick, like four perimeter, 50 percent infill, like the tough PLA snap. Just just snap. No, so my my video on the on the death racers comes out Saturday. It's just an edit now. And I have to tell you, I've replaced the parts with a CF nylon and CF PLA and I've done some tests and it's so much better. It's so much better. Yep. Oh, yes, no breaks. Yes, that's right. Hey, we were you listening then to the upgrade we're planning? No, I had to go downstairs to do something. What are the upgrades? Recap, recap, the upgrades are four times the speed, which you knew because you text me earlier. Oh, that upgrade. I thought you were talking about, I don't know, something else. But yeah, yeah, yeah, that would be amazing. Because right now, I mean, our full battery, it cooks, right? It it it zooms pretty good. Yeah, it goes a lot. It may last for a while. And I did notice so I went in the grass and it was like, but I had to go backwards because going forwards, the weight in the back would tip it up and it wouldn't it wouldn't track because it's it's a little bit back heavy. Aren't we all one of the one of the real winners is here still is pooch. Because what you don't know is these guys left it all too late. So I had to source the parts and give them the parts in the UK so they could take them back and build the races. Right. And then what happened, Joel? Well, so I'm well, OK, I know you you spent a considerable amount of time all those all those like days at this point just compressed really tight. And you build pooch's racer, at least, you know, the motors, the electronic parts and what the speed controller, the, I don't know, the the things, right, the stuff you got it. You got to that part. I know we took it back to California and he couldn't did it into his luggage because, you know, we had a booth to run, a really sexy booth. Me, though, I got I got the tracks together when I got home and I was really tired and I was like, I will just do it at Murph. And by will just do it at Murph, I mean, John and Sam. Yeah. Hey, I can't say anything because I showed up with just just tracks as well. So the plan was we were going to film a build video at Murph and I was going to build it with Sam. And then when I got to do that, yeah, yeah. No, well, Friday, we're going to do it Friday afternoon, right after we set up. And then I got there and John's like, give me the box of parts and leave me alone. Like, don't talk to me. You can't I was like, can I do anything to help? And he's like, yeah, go back to your booth. Like, so thank you so much. Tripod, John at Tripod's garage, because he built mine. I think he's Sabbath. I think they sabotaged ours is what really happened. I mean, I I think we sabotaged ourselves by being lazy. I think that's what did it. And honestly, I did see someone talk about 3D glue and they were the savior of all because one of the polymaker filaments I had was a silk filament, which by definition doesn't have the same layer adhesion. But I still built structural parts out of it because why not with two perimeters and 10 percent infill on the new bamboo? I wasn't thinking. And so I went to Andrew over 3D glue and I was like, I bought some glue. And I was like, building my racer with glue rather than, you know, rather than screws and nuts. And then he brought it over. Wait, wait, wait. He brought it over. And then I was like, can I just keep it here? Yeah. Now, what happened is every time Joel picked up his racer, he had a 3D group glue pit crew around him. And he would be like, do you need it broken? Set it down. They would run in and it would be like, do you need a video like that? No, it was awesome. Yeah. You know what? Next time we do this for TikTok, we'll film a vertical video of a racer pulling up and then just a pit crew. It just, you know, just stands upon the racer and have everyone in the hot make shirts just jump in. Yeah, yeah. The hot makes pit crew. There you go. The hot makes. So truth be told, when I had to run back in because I smashed my wheel off, they saved me too. I got two longer screws and I ran over to the gloop and they're like, throw some on. And I was like, yeah. And then I, they said, where's it go? And I said, right here, they go, you better hurry. So I'm screwing the screws in and they saved the day over there too. So I got it all. I got it all back together. Dang it. There we go. There's my racer right there. And everything that that is within the tracks is either carbon fiber nylon, carbon fiber PLA, it works so much better. It's a really fun design. Sam, I can't wait for more people to download this and join the Facebook group. I can't wait to actually have a challenge with parts that aren't going to break just by running it. It's. Oh, Joe, are you going to be, are you going to be taking this to FormX? Yeah, absolutely. I'll take whatever I can to form next. Uh, what's great though, with a bunch of pre-planning, I should be able to just stuff a bunch of crap in a box and then put a label on it and then ship it off to whatever hotel I will say that both of my races got damaged from shipping back. So I don't know what will happen. Maybe somebody nosedived on it or something. I don't know. But we are, yeah, exactly. Yeah. So I may do that to the US next time a thing, just ship stuff out. In fact, David said, why don't you just ship it back? And I was like, nah, I'll just put it in my luggage. It was a nightmare. It literally was a nightmare. But we're going to come back stronger. That's the message. A lot more people have these now. Nero has them. Um, Brian Vines has them. Probably. Yeah. So I know because I'm, you know, I'm super, super excited to see John, I think it's John that's printing the half scale one, um, because many ones would be fun to just like little desk racers. Yeah. Yeah. Little desk, like desk death racers. That's those at that speed that you want to up it to and be insane. Oh my God. You wouldn't be able to control it. The speed we're talking about right now is going to be, it's going to, it's going to stand up. I understand that's like, you want to make them smaller, you will never find them and they'll just rocket launch up. That'd be great. I actually can't wait to see that. Actually, it's all about the TPU if it actually sticks down or not. It might just sit there and spin on the, you know, So it gets really interesting though, because Sam's talking about form next, which is an industrial AM show. So we have companies that are printing titanium and composite materials that have a high TG that are going to, you know, make that ting sound and really have some strength. Like I, I cannot imagine we won't see parts in peak for some of these racers. Like I would imagine we're going to see some pretty interesting parts, especially if other companies get into the mix that aren't consumer based 3D printing that are on the industrial side. I'm kind of looking forward to it. It's going to be really amazing to see. And, and from what I'm hearing titanium death racers, what I'm hearing is next Murph, it's going to be instead of the spool racers, it's going to be death racers full size. I'll tell you what, it's going to be on at Murph next year. One, I mean, I've, like I say already, I've already got the tickets booked for the hotel, which I think I know when the dates are going to be, if they're not, that's fine. But weekend, I think we're waiting. See, we wait and see. Is what they, it's what they told us is the same weekend next year. I think, well, Murph is limited by the animal auctions at the county fairgrounds, right? Because isn't the same building. And the only reason we could have it in this building is because it was after the animal auction. I don't know. I don't know. I think we should go at the same time. It'd be a really interesting place to go with 3D printed one side and a bunch of cattle being auctioned. Let's be honest. Just don't get launched the racers into like the goats or something. Yes, I've got 20 seconds to the 25th in Goshen. I'm not staying in the motel that I stayed in last time, but I'm sure that was just like. He's, he's stayed at like a holiday inn or something and he's like, what is this? No. Man, yeah. Oh, so good. But no, but it's going to be interesting. I think if we can, you should just have the pancake place and see if you can stay there. Exactly the dishes. If you just give me unlimited food, what we could do is build a robot that flings pancakes at Sam and he has to eat that pancake before the next one approaches his face all day. Yeah, I wonder. You know, like that the the crispy cream sugar wall that the donuts pass through the pancakes could pass through a butter wall and a syrup wall as they make its way to Sam's face. Well, actually what we'll do is we'll have it fleeing Amish crack donuts at you. Oh, so good. Yeah, those are dense too. I mean, if you those are like a moist moist, I might have to avoid this next year too, because this just sounds like diabetes in a trip. Well, it was the most fun I have on my clothes on for a long time. It was it was seriously good. We, you know, it doesn't matter who you were with. It was just all chaos the whole time. It was fun. It was definitely a blast. There were a lot of 3D printers, a lot of like-minded individuals there as well. And, you know, I couldn't get Joel away from my table. You know, we had to do it at one point, didn't we? It was well, you you were holding his you were holding his racer hostage. So he was trying, you know, just me. I think we even cuddled for a little bit while you made a TikTok. We did. I was singing. And then yeah, you definitely did. 3D printing in red. Exactly that. Yeah, exactly. Yeah. Yeah, I'm still going on TikTok after that video. And I say, I say goodbye and Pooch's nitrous Pepsi blew up on me. Yeah, he's like, you have this nitro Pepsi and it's Pepsi that's instead of carbonation, it's nitrogen. And I cracked it open and just it was awesome. Andrew, come back next year and crack down. That's that's where the yeah, yeah. Crack donuts and nitro Pepsi. Come to Berth. That's the way to do it. Really? Really? It's a 3D printing show where you explore different culinary options. Well, I tried to do it as well, but I just couldn't make the numbers work. And the flights are really like horrendous. Oh my god, don't tell me about it. It's terrible, like awful right now. Getting one to San Diego one way is like 500 bucks from you, which is usually like 50. Where are you coming from? Pittsburgh. Oh. Pennsylvania. But it's usually like 300 round trip out of California because I do it multiple times a year and it's like 500 one way now in the States. Like that's messed up. Yeah. It's it's pretty crazy. We're actually I'm driving. I'm going out to Wyoming this weekend and we're driving because it was a thousand bucks a ticket and my little guy turned two and I'm like, oh, they fly free until they're, you know, while they're till they're two. Well, that means they stop and they make you buy a ticket after two. You know what I mean? So I was like $3,000 not happening. I'll just drive. No, it's bad. But no, thank you. Hey, Joe, thank you for jumping in. Thanks for letting me stop by. That's a lot of fun. We were talking some death racers. Yeah, I appreciate you jumping in and I did fit into Sam's shirt. I got it when we woke up. Well, that's a different story. You know what happens at Murph stays at Murph. Jim, it's fine. It's fine. That's why it's his size. Not mine. Well, I'm going to I'm going to take off. All right. See you later, Joe. Have a great night. Surprise, by the way. We were talking and I was like, Joe's got to get in this. Let's see. I just chatted in a quick and I shot him the link. But, you know, it was definitely a lot of fun. Death racers. If you haven't checked it out earlier, we posted the link. Check the link out. It is it was definitely, I mean, it's worth the build. It is a heck of a build. I'm going to throw it out there. I didn't even build mine. And it's a heck of a build. But it's a lot of fun and definitely rewarding when you're done. As things evolve, this is one of my kind of like, I'd like to people to build the one that we put out and then if they want to modify it later on, then pretty much they've got most of the component parts. You know, there's not going to be much changing. It's when people then start putting crazy stuff in there and then someone else is always trying to follow that trend. Go for it. If you want to. The version one to be there would do some tweaks and modifications just to make, you know, things a little bit stronger. But the key is very much going to be about the layer lines, the infill and obviously the materials and finding out where the weak spots are, which we certainly did at that week. We only had one race. That was one race. Paulie maker. Filament was great. Thank you so much for sponsoring the filament on mine and Sam's and probably Joel's and a whole bunch of them. Yeah. So thank you so much on that. The filament, I mean, like 99% was great. Just don't. I didn't have wheel covers. Don't run into somebody sideways with the wheel. It wasn't the filament. It was just a spot in the gear that, you know, didn't go great. Shout out to Sam for letting you drive his Benchie racer. Yes. That was pretty brave. He usually only touches resin prints. So you're pretty. No. No, that's Matt is a good dude and he was having a lot of fun. But we got some, we got some hot makes to get through. You want to do some hot makes too? Let's do it. All right, ladies and gentlemen, hot makes first time in a couple of weeks. Let's do it. All right. The first one we got comes to us from Uncle Bunk. This is a project that's gone to the edge of space and has been recovered and the Bob Carnes helped make it possible with a Webster mini spaceman. And let's see if I screw scroll this down. They tagged us. Let's see. 132 has flown to the edge of space and been recovered. It must have been, I'm guessing it's a balloon. I'm not sure. Let me know. But I do see the mini dude on here. Right there. That's insane. Yeah. It all went up. 200th mission it says. It all went up and got recovered. So. That's pretty dang awesome. I see Grogu flying in the background here too, by the way. They would. Edge of tech. No, edge of space. That's awesome. But yeah, that's pretty cool that a Webster mini spaceman is up in space and this thing went all the way up there and came back. Thank you for sharing that Uncle Bunk and Bob Carnes for printing it looks like. What else we got? Abby Brown. Abby is a frequent flyer this week. Yes. She has been just killing it with vases. Have you been seeing these Shannon? I have. I lose my voice. I have many, many tags and they're also they're also different first of all, but they're not amazing. I love them. See variety. Variety. She's been she's been killing it and some of these are just I mean, I love the texture on that one, by the way. Some of these are really cool. She's playing with them. It looks like she's using I love how that like she has more functioning too. Yes. Right. Transition. Yes. And then here you go. She has not a banana for scale. We'll forgive you, Abby. We'll forgive you. But it's an actual scale. So there's that. These look like they're about 200 millimeters tall. And then let's see. I'm pretty sure I thought I had another one. I'm going to move this one up. I'm going to move this one up because why not? Summer days. Let's see. Let me let me just do this. This was pretty cool. We need those ramps for death races. Yes. Death racer ramps. So she just she just wound up the little motorcycle guy. Oh wow. Yes. Over the flexi rex. Oh. I guess that's how you kill a flexi rex. That was that was a lot of too much fun. Wait, wait, wait. We have a comment that says sound on. Oh sound on. I think I think he had the sound on. Let me start it here. Let's try it. You have this sound. I think we have the sound on. Yeah. Whoa. You guys hear that? I don't hear that. No, I'm not picking it up. Oh. Fortunately, but it is on. It is weird. I can hear it in my ear. So it must be playing. But yeah, that that was super cool. And I think we have one more from Abby that I'm just going to move up because why not? This was this was actually we might even have too much. We have another one. It was this. Welcome to Abby hot makes. So the first one here straight from the print bed to the turntable. This is there we go. Yeah. That's definitely showcasing that sweet try color filament. And then here's a couple of other prints. And I think if we scroll down, you can see them. You're spinning at the same rate, she said. Pretty dang cool. I don't know what what is this thing? Let's see. Did I miss what it was? What is it? Abby? Oh, it's a. Oh, right here. It's a toothbrush. Sam F F CD and toothbrush tree. I'm not sure what the acronym is, but let us know in the comments. It's sweet. It's a toothbrush tree. Do you have toothbrush trees where you're from, Sam? No. They grow. I mean no, we don't have any toothbrushes. That's why we've got it. I have them. No, I've got the Hollywood smile going on at the moment. I'm Invisaligning 3d printed Invisaligns. So yeah. It's your grill. Here's one more for Abby. We got this one is she says it feels so magical to me as it as it contains some sort of a mystic potion. So this one is obviously two colors but it's pretty dang sick. That's pretty awesome. So check out. I think it's Colts 3D and it looks like Colts 3D. Check it out there. You definitely got to check out some of her vases. They are just so cool. Yes. There you go. Oh man. What a cleanup effort on this one. The toothbrush holder started looking like trees as I add more angles. You should see the six holder. Oh boy. Nice. Sweet work. I love it. I love the colors especially. They pop here. Oh we got the scale there. There you go. Just in case. We need a scale next to the mini gym next to you. There. All right. Local Maker Michigan post-merf plane builds since I bought some 3D Gloop using Polymaker 3D Proto Pasta and all the good stuff. So that's pretty awesome man. And I was going to ask for a scale but you have a spool. So I mean it's not too big right? What did you put? Did you put something on my head? Oh that's the door open behind you. It looks like. Nice. Nice work here Local Maker Michigan. Next up. Have you guys seen these? The skulls. I think we talked about them. Maybe like a couple weeks ago. But Chelsea has been doing these skull planters. She got the inspiration from Uncle Jesse's and they are just killing it. I love these things. I think we need to get to you some Sam. I think we do. I think we need to make that work. That looks awesome. Put this on the death racer. That can happen. That definitely can happen. It definitely can happen. Oh shaking. Yeah I think Shannon needs a couple of these too for her background. Oh on the top of your mannequin there. You can print one of these. There's no way to put it. I don't know. I was just talking like the head on your mannequin. I'm like me bro. There's nothing to do out here. Well we can gloop it. I can't even pull this one down because it doesn't stand on them. Yeah I uh back to school. Back to school special. I can't even say that straight Brian. Nice work there Chelsea. These things are awesome. Check them out. They're free on things. So you got to check them out. Free on things. What else we got here? Look I'll make commission again again. Printing the same skulls. I think I love all the different textures. That's one of the things I love about them. Nice work there. Chris Travis. The regulation caddy system by clock spring in tripod garage. Favorite colors for the new office at work. Tripod if you're still with us. There you go. It's the green and gold. Yes that's Packer's colors. He's a Bears fan. Although I don't know man. Maybe I have to be a fan of you guys because I bet you mean your stadium's a little bit better than our city does. Well uh Lambeau Field will never change but I can't I can't speak for any of the other ones. Yeah you don't want to know what they did today. Thank you for coming. Yeah I don't even know how to pronounce it or I'd tell you guys. It's just awful. That's hilarious. Well Tripod was recently camping in Wisconsin and he had a Bears picnic table cover on like you know like a tablecloth. So this all stemmed from that I think. What else we got? 3D 3D printing Joey. I was expecting a kangaroo to pounce around but final product is a coaster. Everything printed in Arianne filament on the under two pro and gloop to hold it in place. This is pretty cool. I like this idea for a coaster. Yeah you could get behind that. Put your cocktail your your uh one of your four cocktails. Oh I just tuned it out at this point. Like y'all reacted I'm just like. That's hilarious. Yeah this this is awesome and that looks super cool. Those layers are yeah. Yeah nice work there. 3D printing Joey. We'll follow you. What else we got? Oh drinks. This one was pretty awesome. 3D print and paint the BR2U droid by Badley right? Yeah with a smoke mod. This thing is pretty dang awesome. Hey look at those tracks. Oh they look familiar. Mm-hmm. Yes I love it. I love the smoke too. That's cool. Oh what? Yeah have you not seen that seriously? I think he was talking about this when we had him on the show but I don't think I've seen it. Mm-hmm. Yeah my one does bottles of knappies for when we had my son. Nice. Yeah. This is awesome. We should have had these at Murph driving around like handing us beverages. Definitely. And crack donuts. Yeah if we weren't remember we were going to drag around spools with beverages in them and then we never got that far because they all broke. Yeah I did. I did. There you go. Janos got it. Nailed it. Don't worry I still have my Murph survival bag. Yep with the water and the cup and the Oreos. Thank you so much Caleb's dad. Yeah thank you for that. Did you open that yet? Not yet. You keep showing off the bag. Well it's a survival bag. I can't open it until I need it. Geez. All right what do we got here? I know we're running late. Oh it's only two after. I thought we were much lighter. So this I think Caleb's in the back. I don't know. I want Caleb to come out and let's talk a little bit about this. This is from Richard Smith. This is the gentleman who passed away recently. This was a pretty dang awesome build and I know he tagged it for us and I kind of wanted him to jump on. Do you know anything about this Caleb? No I guess not. There he is. There you go. You guys hear me? Yeah we can hear you. Okay there we go. No I was just scrolling through Richard's stuff recently because I was missing him and saw this and thought it was really cool. When we were at CBC and C together he was asking me questions about Tinkercad and learning how to use it to model simple things and when I saw this I realized that he had actually spent some time and learned it after I had left which I thought was really cool. But he made this from a there's a link somewhere on his Twitter here for the Thingiverse product item page whatever it is. But he made it with a cigar box just a blank cigar box that he bought for like five bucks on Amazon and then printed the insert and added felt. He's got two different inserts for it for for felting it and everything. I thought that was really cool. Yeah this is pretty cool man. So thank you for sharing that. Again description if you want or can help the family you know definitely could use it in this time and yeah so thank you. Okay bye. All right last police. Shane it closed. Tomorrow I should have it in a state for printing. So Sam I'm not sure if you saw the baby belt at Murph or not but Shane had it there and it was printing at Murph. So Shane's with us he's actually I saw him chatting a bunch in the chat already. So this thing's pretty awesome. What Shane what is the actual build what's the build size on this like I think it's something like four or five inches by it's very small obviously it's a baby belt but it has if you can see it it has the there we go the grogu yeah the grogu baby stuff uh belt which is awesome um skydome we saw that at Murph yeah uh we saw that at Murph and uh Kiri I was just I was just bragging about the smooth transition it's like I go to jeez okay uh though we saw that at Murph it's maybe like four or five inches wide and I'm pretty sure that the belt is made out of like fabric from Joanne you know what I'm just gonna I'll be back just go away that was awesome uh there we go Shane says 80 by 100 by 60 uh I think that was awesome it was it was pretty cool to see at Murph and it was it was awesome to see there um um Sam's thinking it's way too late for this way too chaotic today between the internet issues and yeah a random Joel sighting um but no it's very cool nice work Shane and uh we can't wait to see it printing if you didn't already get it printing maybe I missed it but I don't think I don't think I saw it um after this now that it glows this is pretty sweet but uh that was our hot mix I've got a hot make for you this is you've got a hot make all right let's do this this is uh this is my um mechanized gorilla um that I saw on Freedy Gloops um stand at Murph and this is taking this is free yeah this is 350 percent um of what it should have been so it is gigantic and at the back here um oh that's actually printing parts for I've had to enlist about six printers now to print the rest of the parts for for this I thought it'd be a quick print but it's going to be probably two weeks so um nice what so that's the head is there more to it then yeah the whole body the whole thing oh there's your print in the whole body dang if you had a bamboo you probably have it done tomorrow you know don't don't do you know how fast I could have rescue reprint in yes and I need to reprint it and I'm not doing it because it's just gonna take me six you know what this is the problem with small youtube as you see is that you know we're just not considered I know right we're gonna form a club and just demand I've got the alliance with that with rat rig they always sit they always sort me out you know that's a quick that is a quick print I was gonna say you have a rat rig right there I'm still single you got three rat rigs yeah what the heck and the new 3.1 upgrade that's coming to a video very very soon so uh make sure you look out for that one don't forget to hit that subscribe button nice oh nice well uh that's okay it's so good um so oh so when's the spool video when's the spool kicking video coming out because when I did the kick at the spool I was like oh my god I must look like karate oh the reality is I probably look like fat by kicking some spoils yeah uh that's uh that's in the video it's coming soon okay good good good good I will put it this way uh I got too busy today to get it out but we we have it coming we had a lot of footage we were trying to get through it all and um did it look as small as I thought it was going to look uh I'm not sure I saw well I saw the actual footage um from my camera before I gave it to you know before I gave to Caleb um but how I'm not sure Caleb will have to add I don't know how he you know I'm not sure how you're portrayed who played you in the video so so I'm not sure do is it around the same oh oh oh wait wait wait I got it I got it okay I got it right here uh so the spoiler alert because obviously I didn't release this video yet but um that that's a good question Sam here I've been waiting for this to come out and it's you know here you go let me let me just so so actually Skydown's with us in the chat he showed up with a truck load a literal truck load uh a truck bed full of spools um to donate and you see a lot of them in that bin in the shot right so then and I just want to kick a load of them yeah so then it doesn't play well does it Sam has Sam has this idea uh Caleb the volume's up I'm not sure if it's on the gonna play or not on the video but we'll find out um but Sam has this idea like I'm holding these things and he's like or did I am out like like roundhouse kick it or something and I thought I'm gonna take this to the face well let's see what happens just just because you guys are still here with us we're gonna do this uh this will be released probably tomorrow oh yeah look at that and you're starting to make some movement yeah my yeah I don't remember I think that was edited in um yeah oh yeah look at that stance yeah that was that was edited in I think uh we want to make sure I was trying to make you look skinny um well yeah yeah but uh pancakes there's no there's no that's what happens when you have too many so stop eating them uh no it's gonna be a fun video truth be told I haven't even seen the whole thing yet uh so I'm I'm super excited to watch what Caleb uh got together I think there was 160 something b-roll shots and uh it was it was crazy the camera adds 10 pancakes right all right I know it's super late by you Sam you're like after one in the morning I think and and um what's anything else Shannon before we go I I know um no I don't think for me guys I'm just busy here prepping everything I shipped half of rescue in a box to San Diego and I felt like I just lost my child so I just shipped half of rescue in a box that doesn't sound creepy at all it's really sad and I'm scared and like I'm sure it'll be fine but I don't like that it's not here and I can't see it even though it sits in a box here so we'll see how that goes right your baby's in the your baby's like flying across and if you shipped it a FedEx you might as well just plan on reprinting yeah I will never touch FedEx ever well hopefully it gets there in one piece and hopefully you have a great when is when are you going is it next week I leave next Wednesday oh so so we got one more of these before you go yeah um anything else Sam before we go who's on the next one who is on the next one uh what's the obviously you're impersonating yet the fake Sam Prentice we're gonna have him on next week uh I don't know if we have anyone next week but the 25th we have the crew from cookie cad that they give us that filament and stuff um I got it right here but I can't reach it um without taking too much time here but it's it's pretty awesome filament uh it's cookie cad and we'll have those that crew on on uh the 25th yeah so there's there's that to look forward to um amazing yeah and they have a really cool program too we're going to talk about their software uh as well but uh if that's it well everybody else thank you so much for hanging out with us it is uh about 12 minutes late but that's okay we had a lot of fun we had a surprise guest we had Sam I mean that's what really matters is Sam here right and uh we had uh we had a good Caleb and Geary sighting in one episode which doesn't happen very often um proof we're not the same people yeah uh we don't know what you're talking about um everybody else have a great week we will see you next week right here at hot makes same time 6 p.m central and uh yeah we'll have some fun with you guys have a great week everybody see you later bye