 Hi, welcome to Quick Talks. I'm your host Steve with Retro Tech and today we're going to be going over Yoke adjustments So Yoke adjustments going to pertain to your screen and how level it is You can probably see on the screen right away that it's very crooked and so let's try to talk about how we can fix this and What may be causing the problem? Take a moment to look at this monitor tube, which came out of an old PVM that had to be salvaged But this tube still has the full Yoke assembly on it and it's very good for doing demonstrations and safely looking at these parts So you can see here. This is our whole Yoke assembly right at the back of the CRT too and This is how you adjust your Yoke very easily You don't have to take it all apart most the time to get it adjusted But this thing just turns a little bit and when it turns a little bit the wrong way That's what makes the screen look crooked Now this has three points of pressure that are being put on this ring by these little spongy hard foam wedges And what happens over time is the epoxy fails they wiggle and move and your Yoke wiggles a little bit And then it shows a crooked picture So what we're going to do is we're going to move our Yoke on the test TV back to where our screen is level and then We're going to make sure that these Points are nice and tight and put some fresh epoxy over this touching both the ring and the pad So that it'll may stay in one spot for future for the future. So we won't have to make another Yoke adjustment like this we're back here behind our actual running monitor and Our Yoke is a little slightly different, but it's just this black one piece right here This is what we're going to adjust As you can see it's got these points here that we talked about on the other monitor And they've just come a little bit loose right into there. And so we're going to move this Until that picture on the front side looks clear I'm going to move the camera over there But before I do that, I just want to show you how safe it is you just grab on there and just twist see Moves a little bit and that's what's causing that screen to move and be not level Okay, back to the front of the screen You can see look at the lines at the top of the screen here and just how crooked they are and this happens a Lot on these monitors. So I'm just going to go in like a procedure. I told you I'm going to turn it the opposite way Make sure I get it right. So I'm going to try just even out those lines Just like that so I could see the top and the bottom lines on my picture now. I've got them flat and parallel I'll go ahead and epoxy my little Wedges and it'll be good to go for another 20 years on the Yoke adjustment. Hopefully Anyway, this has been another episode of quick talks. I appreciate you watching Please like share and subscribe and please feel free to comment on it There's any other topic you'd like to see in a future quick talks episode. Thanks again. I'm Steve. Have a great day