 Alright, in this video I'm going to show you how to use accessories. So on the bottom of the M50, as with most cameras, there is a one quarter inch screw thread and that's where you would connect a mounting plate for a tripod. I don't have a tripod handy but that's where the screw thread is. Now for attaching accessories, this little slot here is called a shoe mount. There's two types of shoe mounts, there's hot shoe mounts and cold shoe mounts. Basically the difference is whether or not the shoe mount has any type of electronic components. So this shoe mount has sensors or conductors to which you can remotely control like a flash light. So this would be a hot shoe mount and so if you wanted to connect, for example, if you didn't want to use a flash light, flash you can connect a wireless microphone system. So let's actually, before we do that, let's press the menu button in the bottom right corner and then select the first category. So I've already selected movie recording mode from the dial and then sound recording and then I select it from the touchscreen or use the selection wheel and then recording level. Again, pay attention to the sound level, the sound meter. Ideally, the peak should be at around minus 12. So if person, the subject or subjects have naturally louder voices, you might need to lower the recording level and vice versa. If they're too soft, you might need to increase. So currently it's set to auto so I'm going to change it to manual and then let's see here as I'm pressing right on the selection wheel, it's increasing. Actually no way it isn't. I need to select that option first and then okay you need to highlight it then press the middle of the selection wheel to actually change. You'll see two arrows. One is the original setting and then the white arrow is the current setting. Okay, that's if you want to use the camera's built-in mic but if you want to use an external microphone, like a wireless microphone system, you would connect the receiver. So this is the receiver of a wireless mic, a roguel wireless mic system. Here's the transmitter so I'm going to turn this transmitter on by pressing and holding the power button on the bottom. So it's two solid lights indicate that it's turned on and it's paired with its receiver. So this is the device that would be connected to the subject. They would wear it on their person. Okay and then here's the receiver so it just this has a belt clip and so it slides into the shoe mount. See if I can show it. There we go. So it's solid and then I'm going to use the appropriate cable the TRS to TRS cable the black black cable that comes with this kit and I'm going to insert insert the cable into the side of the receiver and then the other end goes into the camera's microphone input. So on the left side as you're facing the back there's a little door just open it okay go and we're using the TRS to TRS cable because this 3.5 millimeter port is intended for input right so there we go okay and then I'm going to just hold up I'm not speaking I'm gonna stop speaking I'm just gonna be tapping the microphone of the transmitter and so it's too loud but this is kind of skewed it because I'm actually tapping the microphone but this shows that yeah the transmitter is picking up sound and it's relaying it to the receiver and the receiver is sending it to the camera and so I am ready to use this microphone and then press the menu button to return to the home screen so you home return to the home screen and that's really this camera is set up to use this wireless mic system for audio recording.