 Ok, good afternoon to all, we are starting afternoon session, we are starting 2, 3, 4. Actually sir, we will provide any video or PPT manual of installation of clicker on Akash tablet. You know that you will get an APK file, you can simply install, during the coordinators workshop we will demonstrate how to install the APKs on the. No sir, sir we actually saw the demonstration but it will be better if you post any manual like you post the others manual in the module, so that will be better for us. I am just requesting you, if it is possible. Yeah, yeah, we will, we will. Sir, another question is, will IST provide any certificate like faculty for the technical supporting staff for this workshop? Regarding the administrative question, I do not have any idea, anyway I will, we just send a mail to e-outreach then they will reply. What will be the job role of the technical supporting staff for the workshop of 10th and 11th? Ok, 10th, before 10th and 11th you will receive the tablet, first you want to charge fully, charge all the tablets, after that you want to install the APKs on each and every tablet, and try to connect to Wi-Fi and check it, all the things are working fine. Ok, and when the tablet will be shipped from the IIT Bombay, will there be any manual with the tablet like how to operate it or… Yes, user manual is inside, it is there, before the workshop may be by 6th you will receive two sample tablets, that is we will give one to your coordinator, so you can check it and experiment with that. Ok, thank you. One to four one. Our question is that when we try to install the APK file in an Android phone that is having configuration 2.3.6, it just gave a message of Torse Error. Sir, we just want to clarify that if you can have it on the, if you have the same message on the tablet. You know you try to install it on August tablet, there is no need to install it on any phone. Sir, we are installing in Bombay, Android phone with 2.3.6, and it just gave us a message of Torse Error. So, if that message comes on the tablet, what we have to do? It is 4.0 and it is on 2.3.6 also sir. I am using a Samsung based phone, I have installed it on that also. Do not install it on the, do not install it on an Android phone, and August tablet that you are going to get is a, has a version 4.0.4. So, we have not tested it on the mobiles, ok. It is just for the educational purpose and it is just for the tablets. It is not made for mobile phones. So, do not try it, we have not tried it and we will tell you not to try it. We just try it on the tablets, ok. Ok, fine sir, fine. Sir, one more doubt in the world, that if we are eligible for 3 more registrations, if we are eligible for that also. For which workshop? For Acast, Acast is a registration that is workshop. They just give us a deadline, time time, 11 November. If we are eligible for 3 more registrations. No, no, it is already closed, registration is closed. If you have any query regarding this registration and you just call admin team. Ok, ok. We have to call on the admin team regarding that. Yes. Sir, actually when I connected the, because of the proxy, it just gave the message of network connection. But when I connected with the direct line, it was working. So, is there a possibility that we can work it on a proxy system or we have to use the direct line from that? Only 2-3 senders are getting this problem through the proxy. We are working on that. Anyway, you just post it to a module. If we get a solution, then we will post to you. I have configured it on a direct line and it was working. Sir, I have configured it on a direct line and it was working. So, we will arrange the direct line for that system also. Ok, temporarily you can use the direct line. There is no issues. Because from only 2-3 senders, we are getting this type of problems. We are working on that. Ok, fine, sir. Thank you, sir. Thank you. Thank you. Thank you. Thank you. One, two, four, two. So, everything is fine from our side. Installation is over. We have one query, sir, regarding the IP address. Ok. You told that you have to use a static IP for a server. Yeah. Right now it is working with the DSAP. Will it be ok? No, no, you use static IP. Only for the server, please use static IP. But still it is working with DSAP. But when the QC is conducted that time, you want to give the IP address to the tablet. If it is changing every time, then it will create an issue. That's why we are suggesting please keep a static IP. Ok, sir. Ok, sir. Ok, thank you, sir. One, two, four, four. Ok, sir. We cannot able to install the clicker software, sir. So, please send any video files for that. If you download the presentation on module, you just download that presentation. Follow that steps. What is the error you are getting? Sir, the remote, the remote agashklinger.var file does not copy to the clinker folder. We do not want, we cannot able to copy that file. That file into the clicker folder. Tomcat folder. What is he showing in his permission tonight? File missing, sir. File? What is he showing? File missing error. I think maybe the downloaded file is corrupted. Do one thing, you download the clicker sift file from the module and unzip it. After that, you copy the var file to the corresponding folder in Tomcat webabs folder. Then you shut down the Tomcat and restart. Sir, another query. Is Wi-Fi required for our for agashklinger? Yes. Wi-Fi is mandatory. Wi-Fi with internet is mandatory. Can we be able to insert a sim on the agashklinger? No, it is not possible. Sir, when will we get the tablet? Before 10. Before 10, okay sir. We request you to send a copy of mail to RC coordinator mail rather than to agash coordinator. For what? Sir, if you can, you can send it to the RC coordinator. Just keep checking on module, all the updates will come on module. All the files and every update is coming on module. What is the problem is, right now people are sending young mails to agash coordinator. That is why we blocked this. If you send the mail to the agash coordinator's group, then directly we will discard that mail. Because it is not going to a single person or a... What are the different sessions handled during the workshop? During the workshop schedule, we will announce it later. Thank you sir. One, two, four, eight. Yes sir, my question is, what is server configuration, sir, for agash oriented program? Server configuration is in the C1 processor with minimum 8GB RAM and 500 or above into two hard disks. You want to configure it on software rate. Anyway, we will put the configuration in module by today evening itself. Sir, we have already registered at clicker one, but one of our technical staff member registered that one. We want to modify that one, sir. Because it's a main coordinator registration, sir. You have selected proper remote center. Yeah, ma'am. Then you can just go to update link. There is a update link in coordinator register link. Yeah, just you can put your user name, new user name password. But I am like taking into consideration that you have selected proper remote center. Because you won't be allowed to select remote center again. Can we continue that login? You can change also and you can continue with that login also. It's not a problem. For agash tablets, we require the SD cards. Can you provide that SD cards for all the tablets or we can purchase it? You want to purchase? Yesterday, professor Fatah already announced we will provide one lakh rupees for each remote center that include this SD card wireless access points plus the server. Okay, sir. Yes, sir. Yesterday professor Pataksar announced that first lot of agash tablets, 14 tablets, up to 10 to 11 November, sir. Sir, what about rest of the participants, sir? They are using ordinary PC or agash tablets during the main workshop, 10 and 11 November, sir. How many participants registered in your remote center? Sir, from our college, there are total 77 registration is done. Okay, then you will get 77. Out of 77, we have 75. Sir, if it is not possible, total 77 tablets, then what about the remaining participants? They can use the desktop for the 10th-11 workshop. For the 10th-11 workshop, you will get how many number of participants is there, that number of tablets you will get. But distribution of the tablets, there is some terms and conditions there that your college want to certify that. That faculty only get the tablets after the workshop. Sir, how to check the connectivity between the server and tablets, sir? Our server and IID server? Your server and IID, you already registered, no. That means after the registration, you can see the page waiting for the main queues. That means you are successfully configured. Okay, sir. Okay, okay. Thank you. One, two, five, two. Sir, I have small doubts, sir. When you are going for the server, we can use the same Ubuntu desktop version 10.04 or we can go for some other server version. You can put any version of server, like open source like Linux, Ubuntu server or Fedora. But the thing is the software should work on there. That is the only one way. Thank you, sir. One, two, five, three. For the registration, during the registration, I give one the seat allotment as a 50. Now our staff members are registered as 111. So is it possible to have the all 111 for the tablets? Yes, yes. Okay, sir. And one more thing, sir. For the server, you have given some configuration. Yeah. So we have a core I3 2GB, 160GB odd disk. But in the server itself, we installed everything and it is working fine. Shall we be able to continue in that? No. It is an I3 machine, no. Actually, this server is not only for this workshop. We are continuing with this project. For that time, we want to configure some other software, some more videos and lot of data will come. What are the software developing in IIT Bombay as well as in various remote center? That we will put it in a single repository and all the 250 remote center want to mirror that. So for that purpose only, we are providing this one lakh rupees for setting up this infrastructure. The server is not only for this. Okay, sir. We will continue in your prescribed server. Yeah. There is a minimum configuration of this. So most of our registered participants, they are given only the request not to conform. Whether we have to do the confirmation? Yes, after registration, they will get an email confirmation, mail one. Once they click on the specific link, then only their status will change. Is it a mandatory? Yes, mandatory. Okay, sir. Thank you, sir. One, two, double five. What type of SD card we are using in other tablets, sir? Micro SD card. Either micro or mini. Micro SD card. Maximum capacity of SD card. After 32G. Sir, can you suggest any Wi-Fi device? Two, three Wi-Fi access points. I think yesterday Rajesh mentioned around TP-Link access point. One TP-Link access point can handle around 100 connections. Means 100 tablets you can connect to that TP-Link access point. So if you have more than 100, you want to go for more access points. Okay, sir. Fine. And one more question, sir. One of the technical staff registered as a technical staff, but he didn't receive any model login information, sir. Status in the registration page? Sir, actually, his name is not described in that page, sir. Name is not appeared means he is not registered. So he is not able to do it. He registered, sir. One confirmation mail came from eOutreach. That in the verification link, the ID is equal to zero. It displays ID is equal to zero. Okay. When we click on that verification link, it... You just do one thing. You just forward that mail to eOutreach itself. They will reply back to you. Okay, sir. Okay, fine, sir. Thank you, sir. One, two, five, six. Sir, at the time of creation of the user clicker underscore UI, it's operation failed to create clicker underscore UI at the local host is what I'm getting at. But I could able to create a user with clicker UI. So that means maybe is there any problem with UI underscore? Yes, yes, yes. Okay, have you like gone to MySQL command prompt by root? Yes. And from MySQL command prompt itself. But I could able to create user clicker UI. Okay, which OS you are using? Even to 10.04. One minute, sir, you do one thing. You just uninstall that and reinstall it again. I think something wrong with your configuration. I think so because most of the senders are able to configure this setup very easily. Most of the people are already configured. It is working fine. Maybe something wrong with your site. That's why it is creating problems. But clicker software, I could able to get connected like I'm getting waiting for main sender's instructor that successfully configured that I could able to do it. So you have already like registered also? Yes, already registered. I think then you already created the user name and clicker underscore UI. Otherwise it is not able to connect. That is true, sir. The thing is I could able to create a user by clicker UI instead of clicker underscore UI. Without a user clicker underscore UI you can't access the database. And if you are logged in and you are successfully logged in. Do one thing for you just take a screenshot the operation denied that just take the screenshot and post it in model we will reply back to. Sure, sir. And one more. Is there any checklist from your end which says that the remote center is technically ready for the workshop, for the proposed workshop? Yeah, then we will put it on model. The feedback form will come on model. And one more thing sir, last one. Like most of the participants are saying that regarding the server setup. See, on the normal PC we have setup whatever the installations that are required. So will that particular normal PC setup is okay for the forthcoming workshop? Yes, normal PC is enough for the forthcoming workshop. And after that you want to change the PC to a server, convert to a server. Okay sir, thanks a lot. One, two, five, nine. In our campus dealing wireless switches there. Okay. How many participants registered? Forty-three participants are registered. Okay. I think you can use one more. I don't know what is the capacity of that dealing. So if it is handling this much participant then you can use that. Otherwise you want to put one more access point. That's all. From our side, no more questions regarding software and all that. Sir, we have already installed the clicker software and which will be used as a server during the 10th and 11th workshop. But we don't know exactly how can we connect our tablet through this server to access the IIT Bombay. For connecting a tablet you need Wi-Fi. Through the Wi-Fi you want to connect it through your local server. The local server automatically connect to IIT Bombay server. How can I give the connection? So tablet will be connected through Wi-Fi that I can do. But how that tablet will communicate to the local server? Whether I have to give the IP address of the server as a gateway to that tablet? No sir, in the tablet there is an option called you want to give the local IP of the local server. If you give the local IP of the server to the Agash tablet it will automatically connect to that local server. And the local server will automatically connect to IIT Bombay server. So apart from this IIT Billet server, if I want to use internet in tablet, how can I do that? Then you want to enable internet on the router level only you will get internet to the tablet. Okay, that means in that local server I have to use the proxy. Through that proxy you can access the internet. So if I want to access the internet in the Agash tablet, how can I get it? Either using proxy or through wireless router. If we want to download the document of the module, how can we do that? First you want to download the things from module to your local PC. After that using some microSD card or pen drive you can install it on the tablets. In the local server we have already installed the clicker. So from that local server even I can access the module. So now how can we access the module from that tablet PC? No, no, there is no need to access module on the tablet PC. We are using 10 then 11 only for conducting the queues. Okay, so that clicker is enough. And in that case if I want to access the module from this tablet PC how can I do that or is it not possible? Then you want to go through proxy then only you can access. If your college has proxy server then you want to configure proxy on the web browser through that you can access. Okay, so that means during the workshop only that clicker software connection through tablet PC to our local server is enough for the workshop. Yes. Okay, thank you. One, two, six, eight. Regarding TP-Link access point, what is the specific time? Like whether we go for G or N? I think you can go for N series. TP-Link access point, N series point. Okay, now second question is I have installed remote access client on a PC that is working fine. Now if I want to change the server in future so do I have to register again? You can take your dump and you can put it on the new PC that is okay. You can take the database dump and put it on the new server. Third is regarding SD card, it is required to transfer the clicker software only or for some other purpose it is required also. For some other purpose also we need SD card. SD card should be plugged on the tablet when the system is running. Yes sir. What is the use of remote clicker.php file? It is used for communication between the tablet and your local server. That is direct communication is not required. Like there is no use like http colon double slash local host class remote clicker.php. No, you don't have to run PHP for that. You have to just copy the PHP in the specified folder, that's it. That is in www folder. Yeah. Okay, thank you. One, two, eight, three. Technically as far as we don't have but I want to know that there are in ISP workshop in that web page it is showing 34 candidates. They are showing 34 candidates in that the center code instance name is not included. No, the center code name will not come there. You are the Agash coordinator, right? Yes, that's right. Actually if the center coordinator is interested to join that workshop what is needed to do? Only Agash coordinator will join. No, as a faculty if center coordinator wants to join then? There are two coordinators, right. One is RC coordinator and one is Agash coordinator. Agash coordinator want to come to IIT Bombay for the fifth workshop. If the RC coordinator want to participate on the 10th and 11th workshop they can register and participate. That's what. Registration is done but it is not getting shown because one mail has come in center coordinator's mail ID. Their registration is done but still it is not showing in that 34 participants list. Okay, madam, for more information you just send a mail to eOutreach. They will reply back to you. Any other query? Thank you sir. One, two, eight, four. My question is after installation we are going to what we will do next? We have already installed Tomcat 6, JDK and PH5. Okay, already installed Clicker software? Clicker is not installed yet. Okay, then go to Moodle. The presentation is available on the Moodle. The Clicker is mandatory for the 10th and 11th workshop. The manuals are available on the Moodle for configuring Clicker and the packages is also available on Moodle. Download the package and follow the steps. Anything to be installed in Agash tablet? What are the packages you want to install on Agash tablet? That we will give a demo to all the Agash coordinators when they are coming IIT Bombay on 5th. Another question sir. Our 10 technical staff have already registered with Moodle and how many technical staff will receive their TACAS tablet? Technical staff that is according to some terms and conditions. We will check the queues we already conducted and the workshop related and all the things we will consider after that only they will receive their TACAS tablet. Thank you. Thank you sir. 1, 2, 8, 7. Sir, while configuring Clicker, we are getting HTTP404 error in browser window. So, how to resolve this, sir? HTTP404 error means it is not able to find that Clicker folder. So, do one thing you are you installed Tomcat? Yes sir. In the browser when you put local was called an 8080 Tomcat page is coming. Yes sir. Sir, it is giving remote Agash Clicker message. Then you want to copy the remote Agash Clicker wire file to that web apps folder. Then you want to restart the Tomcat. Sir, we have done all these steps and it is giving okay. But it is giving error in last step that is MySQL restart service. What is error with this one? Sir, it is giving sensor script you are attempting to invoke has been converted to an upstart job. You may also use the restart 8 utility. Example restart MySQL MySQL start slash running process 1788. That is process is running that is not an error. I think this 404 error means the file is not able to find you just copy that file. Once again you just remove that file and copy it into the web apps folder. And again you just restart. Otherwise you just restart the machine and try it will work. Otherwise you just take the screenshot of the error what it is coming and post it in the module forum we will help you. Okay sir. And sir when I am installing from Aptone CD some packages marked with red color. They are not getting installed they are giving an error. Packages marked with red color. So how to install them sir? Do one thing you just eject that CD once again you just put it back then you can try. Which package you try to install? Okay. Sir it is almost every package Tomcat MySQL. Some packages are marked with red color there. Means just a DOCS package is there. No I think that package is not available on that CD. Sir one is PHP5 dbg. PHP5 record. No no you want to only install. I think that package is not available on the disk. I think for this workshop we need only the following packages that is Apache 2. Apache 2 PHP5 MySQL iPhone Server and OpenJDK. These all are the packages it is available. So if you want to install some other packages you can directly connect to internet and install. So which router you should buy for connectivity? I think wireless router yesterday Mr. Rajesh told you which is a TP-link that we are checked here. You can connect up to 100 tablets. Just take it in the mood all the information available on mobile. Is it required to install AV software on mobile machine? No no no. AV you can install only on Windows. Okay. Sir actually there is one query regarding Python number which is training session for Akash coordinators. Okay. Sir actually our director also wants to attend this training session. No only one Akash coordinator want to come here. Okay sir. And sir today I got a mail about that we need some computers in same lab on 10th and 11th. Yeah. For attending the quiz sessions in the evening. Yes yes. So sir can we arrange this lab in different rooms? Yes yes okay. And sir we are motivated to attend quiz one. But we have done quiz two today. So quiz one goes in the three. Okay no problem. Okay sir thank you. One two eight eight. We have right now the Wi-Fi setup was two nicole. So when they support the Akash tablet we have to purchase the TP router. If you have Wi-Fi setup you can use that. Okay no problem. And sir what is the log data of registration of the server? Because we are right now continually server not done the software part. So it will take tomorrow morning we have done all the setup. So is there any schedule date for server registration or anything else? Yes sir before 5th we won't do setup all these things. Because 6th onwards we are starting the testing. Using tablets. Okay sir. 116. So when we are clicking on the coordinate registration form then we are not able to go to the registration form. What are you showing? Sir I am getting error that we are getting exception that overg dot apache dot jsp jsp null pointer exception. Internet is connected? Yes sir. Okay maybe that is the problem in the database connectivity. So what we have to do? You just configure the database username clicker underscore ui and password also clicker underscore ui then only it will work. We just check that the slides are available on Moodle just follow the step still the problem is not solved you just post it on Moodle we will replay. Okay sir thank you sir. Okay thank you.