Swap Between iPhone Signal Bars And Numbers





The interactive transcript could not be loaded.



Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on May 9, 2011

How to change iphone signal bars to numbers
If you wish to change your iPhone signal bars with numbers. here's a simple guide to show you how to replace your iPhone signal strength bars with numbers and switch easily between bars and numbers. Anytime with simply tapping left top corner of screen. To do this follow these steps.
Disclaimer: I am not responsible for any damage to your device, please proceed at your own risk although I doubt anything will happen.

Step 1: Open your "Phone App" from ou Springboard then dial this number *3001#12345#* and hit call.

Step 2: Now your iPhone will launch Field Test, you will notice that bars converted to numbers. This number is indication to your reception strength measured in decibels. The closer to "0" the "stronger" your signal.

Step 3: Now Press and hold Power button until the power slider appear, but DON'T POWER OFF.

Step 4: Press and hold Home button until Field Test program is terminated. You will find that signal strength numbers still there.
Now you are done!
You can toggle between signal bars and numbers by tap on signal strength at the top left of screen.


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...