Loading...

How To Make A Rubber Band Bracelet

32,780 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on May 5, 2013

You will learn how to make a Rubber Band Bracelet using the Rainbow Loom. This is called a simple pattern Rainbow Loom Bracelet.

Enclosed are step-by-step instructions on how to make a "simple pattern" Rainbow Loom rubber band bracelet using the Mini Rainbow Loom.

You will need the following tools to make a Mini Rainbow Loom Bracelet:

1. Mini Rainbow Loom

2. Twistz Bandz ( Rainbow Loom Bands)

3. C-clips

4. Patience

5. Perserverance

6. Practice

7. and a positive attitude

Below are step-by-step instructions on how to make a rubber band bracelet using a Mini-Rainbow Loom:

First, open the Mini-Rainbow Loom and hold in your hand the blue device. Place the the yellow hook section down for the moment.
Next, take a color Twistz band, open and place it between the hook inside the blue.

Then, pull the band tight to close and bring together like a string toward the left hand side.

Now, place the band tightly around the second open hook area and pull it toward right side, Open the band and place over the hook again. If done correctly, you should have an X shape in the middle of the blue device.

This is the most intricate and important part of the bracelet development. If you don't get it right the first time, do not worry. Please try again, it will become much more doable an easy once you practice these moves.

You will be able to do it with your eyes closed.

Now, it is time to create the rubber band string of your bracelet. You will use the yellow crochet type hook of the Mini-Rainbow Loom. Take the hook and attach a rubber to the hook and weave it underneath the rubber hook section of the blue device. Bring the rubber band half way to the other side and hook the other part of the band on the yellow crochet like needle part. It should look like a U shape.

Next, take another band and put in on the hook portion of the yellow part of the Mini Loom. Pull the rubber band through by turning in downward with a twist of your wrist and put it through the rubber band in a U shape format.

Bring it upwards and attach the other portion of the same band over top of the needle to show another U shape.

Please repeat the steps for at least 25 times to create the formation of your single pattern bracelet. After you complete the 25 loops, remove the band from the blue portion of the mini-loom and attach the other end of the rubber band to the C-clip. This will help you fasten the bracelet.

Tada, you have made your first Rainbow Loom Bracelet. Congratulation!!

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...