Loading...

Ratchet Straps w Twisted Snap Hooks - etrailer.com

33,207 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Feb 8, 2008

http://www.etrailer.com/tv-demo_eriks...

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This is a 1-1/2 inch x 15 ft. long 4,000 pound ratchet strap assembly with the twisted snap hooks. This device is intended for anybody carrying a heavy cargo load on their trailer or flat bed pickup truck. Again this is good for 4000 pounds, so you could use this for the heavy tool box, lumber or what not. This is approaching industrial duty materials. Again if you're not approaching that kind of weight, the 15 ft. length will help out in just about any tie down situation, even for a weekend warrior. What we have here is a nice heavy duty ratchet assembly. As you can see you pull this button back and it releases forward. To ratchet it down you simply push down. As you can see here this center portion of the axle, the strap will go here. To operate it you pull the strap through, take up your slack and then you ratchet everything tight. We'll demonstrate its use on a typical application.
We have our assembly here, we'll just go ahead and tie down this box. We'll start with the ratchet end on the left hand side then we'll move on to the right hand side. At this point we can thread our strap through the center axle, and pull our slack through. Pull all of your excess through, this you'll have to tie up in your own fashion. Now you hold everything in place and ratchet it together. You pull it flat and there you have it, your cargo is properly secured. Also you'll notice the hooks are shaped differently from the others. The normal flat hook would be parallel with this strap here. What would happen is if the hook were that way you would get a twisting with the strap which would give extra tension on the strap. With this twisted hook it allows the strap to stay flat on the load, less wear and tear and more distribution of the forces. There you have it for part # 01324 the 1-12 inch x 15 ft. ratchet straps with twisted hooks from Erikson manufacturing.

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...