 Hey everyone, Drew with GeoArm and I am back to talk to you about the 2GIG Ts1 touchscreen keypad and getting it wired for power. Now this is super easy, they made this one pretty simple to do. So what you're gonna do is you'll grab your keypad, just flip it over and you'll see two slots right here. You are gonna need a strip of 22 gauge to conductor wire and a Phillips head screwdriver in order to get this done. I have mine pre-cut, I've already stripped it back and exposed copper, so this thing is ready to be wired. So let's go ahead and get this wired in. What we're gonna do is we're gonna take the red wire, we're gonna go to positive here, like this, just get that tightened down, pretty easy to do, and then we also want to go ahead and take the black wire and put that on the negative terminal which is right next to it, like so. Once you have that wired in like that, of course you can remove the back plate if you choose and run it through the back plate. I'm not gonna do that here because just trying to save time, but what we'll do now is we'll grab our power supply and on the power supply, you're gonna have a positive terminal and a negative terminal. This is a DC power supply. So we've already wired the red to positive and the black to negative. We are now gonna do the same on the power supply. So let's go ahead and get these terminals loosened up here. Okay, once you've done that, gonna take the red wire. The red wire is gonna go over to the positive terminal, like so. I mean you can wrap the wire around it if you choose to. I'm kind of just doing a sloppy job here, but okay that's tightened down. Now we'll go the black wire to negative. Okay, once that's tightened down and in place, this thing is ready for power. So what I'll do is I'll go ahead and get it powered up, but there it is. Ladies and gentlemen, that is how you wire a 2GIG TS1 touchscreen keypad for power. If you guys have any questions or any comments, please leave them below. Make sure to subscribe to our YouTube page and click the Show More tab underneath the video where you can view valuable links pertaining to this product, similar how-to videos, and our low-cost, no-contract alarm monitoring services.