 Hello everyone, Drew with GeoArm and I'm back to show you how to install and mount the GeoMD wireless motion detector. As you can see it comes with 3M sticky tape on the back so you can stick it up if you choose. We're going to show you how to do it with putting the screws into the wall and mounting it properly. So what we're going to do first here is we're going to pre-define where we want to put our screws and get the mounting going. As you can see we have it up in the top right and in the bottom left so we offset the screws so that we can mount it in the corner of a room. You typically want to put this about 7 to 7.5 feet high in the corner of a room or in the middle of a room where it's not going to have a fan vent hitting it or I mean an AC vent or a fan spinning or you know the sun going up and down and casting shadows. All of those things can lead to false alarms on your motion. So make sure that you do a little bit of pre-planning before you put your motion in just to avoid that situation. As you can see our textile here is putting the anchors in place so that we can get the motion put into the corner of the room. Once the anchors are put in place I'm going to go ahead and fast forward here just like I just did and we're going to go ahead and just get it mounted. So the anchors are in place he is putting the screws into the slots that we preset and once he gets that tightened down it's as easy as snapping the motion to the back plate by inserting the top of the motion first and then clipping it on the bottom. So he's going to show you exactly how to do that here top and then boom clip to the bottom and then that device is in place and that's how you install the GOMD motion detector. Please like and subscribe to our page for helpful programming and installation videos, product reviews, monitoring, products, and more. Visit www.gorm.com or call 877-443-6276 that's www.geoam.com or 877-443-6276 Geoarm, the worldwide leader in DIY security.