 Hi up Johnny here and on this semantic Monday we are going to be learning how to build some of the vehicles for firefights Okay today folks we are building the GCPS Hornet This can also be the main base to build your plague hornet by adding the extra plague items Or indeed the new marauder Okay, so first off we're going to build the transportation hold These two bits Go together like so again as you're sure you've heard me on All these videos always worth dry fitting everything first Just so you can see if there's any snags Any bits of flash that you may have missed There you go. So they go together like that and then this piece here it's like a ammo box or something that sits on the inside, but what it actually does is holds the flying base When you are using the cargo hold in place You see that then sits in there like that, which gives you a longer recess to put your flying base in and then these two end sections go on Like so You want to make sure You're putting these in at the same time so that they can Still open and close without glue So what I would do So glue one in to start with that in place Then take your doors You'll see Little slots there push one in that side in that side Just hold them in place with your hand While you put this end section on That should just sit nicely In those two lugs And around there And now you'll see The doors still open so they stay open like so and stay closed as well Not too much movement on those And that's that done and then the next section is the main section of the aircraft two pieces Go together like that a bit of glue all along the edges And in those little plugs Now this point before I cut those I'll just see because this goes in here if you're worth Putting that in before you fully close that up just so there's no Snag like so And then cut that in place the same again with these two But what you want to do before you glue these Because I nearly missed it then is take your back propeller You can see it's different to the two side ones slightly smaller and slightly thicker This wants to sit so that these two plugs See and these two recesses here and again you can leave glue from that part and then it does that move up and down It's more prominent with the side wings which we'll come to in a little bit Probably see those move It's nice to do a bit of to have Then we can take the front and back sections and they just Go together like that with this piece over the two of them These those two together like that Glue along here and you say that just sits in there Make sure that's definitely clamped down nicely And the wing sections You have the propellers sit in there like that And in this piece You see these two holes here line up with the holes on the back there and they just sit And there is a left and a right So you'll notice when you try and try fit those You want into the it's fits nicely along here And you'll see again that you have the movement of the propeller If when you come to glue it in Careful you don't get glue too close to these sections here So all I'm going to do piece of glue where both those holes are And nowhere else and that will be enough to hold it in place Like that And then you should repeat the process on the other side And then with the hole that is left On the wing You have these end sections These go On there Just make sure you've got the right one for the right side You'll notice straight away that that one doesn't fit because it's proud there So you then you know that's the shorter side of the three dots that goes to the top like that That in place like that Stick it like that That will dry nicely While we do the same on the other side And here we go And once these pieces are dry You can then be fit to the aircraft There's two holes that line up there And what you also want to make sure is that you've got your little air vents that sit on there like that One on that side One on that side That just clips in And the same again on the other side You just take a little bit of wiggle room sometimes or you might find that there's just a bit of flash that you've missed that just needs shaving off or persuading in with a bit of brute force Which is done for the back wings These slots here start in to the longer side here You'll see that there'll be a unique difference between the two And that helps identify which of these wing sections they go on So this one's got a hole in the middle And this one's got a lug in the middle So I know that these two go together like that And then this one has the little notch missing at the very end And this has a little lug at the very end That way you don't get your left and right mixed up And then these just slot into the sides along here Now these go so for the slightly longer section with these sort of grill pattern goes to the top So I know that is that side And this one is for this side Again if you try and do them the wrong way around they probably won't quite line up And then it's a good indication that you've got them the wrong way So again why it's always worth dry fitting first thing So the next section And if you are wanting to just use the transport holder and this cargo section You can leave these legs off or you can put them on if they don't interfere in any way It's just the landing gear for the hornet And it's an aesthetic choice really as to whether you want to leave them off or put them on But basically what you're looking to do These sections Get the right one Slot into those holes there Some glue down Got a push And then repeat the process on the other side There you go Nice satisfying pop when it goes in You'll see on if you flip this over These bits that you've just put on They are only a half circle lug So you know that this half circle here fits in over the top like that So that is your landing gear in place Should you want to leave the landing gear off These sections are plates that just slot over Remember that gap that was there They just sit in there like that to cover it So there's no hole Then we have a choice to make about some front weapons So you've got two options there that are already built And then this one requires a little bit of assembly You take this section here You can see that So then you see this little lug here and this little lug You know that they line up and fit in together like that And then the same again But on a smaller scale You've got these three little lugs to take the barrels like so And then any of these options Turn it over again Or just sit in the end there I'm just going to glue this one in And what I have just noticed with this piece is it is PVC is this one So you will just need a dab of super glue rather than plastic glue There we go Leave those two off one side And then the pieces that you're left with Bring them all over Tiny fiddly bits Gun mounts And arms for crew Should you wish to install sort of pintle mounted guns into the Cargo Bay here These little arms They just sit You've got the right one On those little pegs there And then you build the gun Much like you do for the one with the mule It's got the sort of two halves The trigger And guard end And then the barrel end And then that also On to the other side Like so And then You've got a couple of GCPS troops Knocking about in your spares box Use those with these arms And you can have Somebody stood in here Shooting out Then once you've completed all the Build process All that's left is to take The crew compartment And your ship And you'll see these four Holes that you've made there Line up with these four pegs And then clip in a bit of force Like so One complete hornet And see What I mean about leaving these Free to move around Which adds a nice bit of dynamics to it There we have it That is the GCPS Hornet build The Plague Hornet kit Is the same build But you have Plague looking sections That you put in instead of the GCPS ones And you have additional things that you add on extra Hope you enjoyed that And I'll see you again soon