 So if you guys have been following my channel for a little while, you guys will remember the set of Bronson Raws I got a while ago, probably like four or five months ago. I haven't cleaned them once, and I decided to do a little science experiment. Had a ton of this germ-x hand sanitizer stuff. I mean, who doesn't have this stuff laying around the house? So I figured, if I pop my old bearings out of my wheels, put them in a little cup, and then dump a bunch of germ-x into my bearings and let them sit for 24 hours, what would happen? And that leads us to here, I suppose. This is the next day, guys. The bearings are looking, I don't know if you guys can see that, but they're looking pretty gnarly in there. There's bits of like, I don't know what that is, if that's early rust forming, or if that's like, I don't know, if that's dirt or something coming out of the bearings, but they're looking pretty weird right now. I've got to pull them out and then chuck them in and see if I can skate these things. And if they are cleaned after sitting in germ-x for 24 hours. I don't know what the appropriate way is to do this, so I'm just going to try to pull this hand sanitizer out and then pull the bearings out. Got some paper towel, look at that. It's like I'm pouring resin. Ooh, it's nasty, look at it. Hope I haven't completely ruined these bearings. Look at that, there we go. So I've got all the bearings out now. They're all spinning. They're not really spinning any more quicker than what they originally were before I soaked them in this germ-x. The ultimate test would be once I pop these in my wheels and try to skate, if they'll kind of free up a little bit more and spin a bit faster. I'm not too sure if you're meant to lube these because there's no cases on them. So if you were to clean them, I mean, you can clean them, but if you were to lube them, the lube would fall straight out the back. So I'm not too sure what the protocol is here with these Bronson rods. Are you supposed to lube them? I'm not too sure. I think they're just meant to be ran, just like raw like this. So I'm gonna pop these bearings into my current wheels and then head to the park and see how we go. I got up real early this morning, just so I could hit the park early so I knew it would be vacant. Because every time I come in the arbor, there's like 50 people here. So I've had a bit of a warm-up skate at the park today. Gonna pop out my G3s, probably need a bit of a clean too. So depending how well this little experiment goes, I might pop them into some hand sanitizer for 24 hours. But yeah, I'm gonna chuck in the raws right now and see how we go. This is probably gonna be the most stupidest idea ever, or the best idea ever. So we're about to find out. Bearings probably need a bit of a clean, they're a bit filthy. That's the inside edge, that's the outside edge. So yeah, these are the G2s though, Bronson G2s. So these are the raws here. They've just sat in hand sanitizer for 24 hours. Pulled them out, did my best to clean them. Gonna chuck them in, see how they go. We out here, and Sean's putting new bearings or alcohol bearings on his thing. Jermex. Jermex. Hand sanitizer. Hand sanitizer. 24 hour challenge. All right guys, we got the raws all situated in the wheels now, everything's bolted up. Don't seem to roll that bad for, you know, sitting in hand sanitizer for a day. I mean, if you're really desperate to clean your bearings and you had a bunch of hand sanitizers on hand, why not? I'm pretty sure it has alcohol in it, so that's a cleaning agent. We should go and test these bad boys out, see how they handle it. How's that? For longevity, guys. Put your wheels on the flat. Oh, it's not. Sorry, Karina. Roll from the top on the flat and bend your knees as your back truck is gonna get stuck on that. Yeah, go from there. There you go. Bend your knees, see you got it. All right guys, that pretty much wraps it up for this video. Hope you guys enjoyed this video. If anyone's wanting to do this to their own bearings, like put hand sanitizer in the bearings for a day, whatever, you can do that, but I won't be responsible if your bearings don't work after that. Once I pulled the bearings out of the wheels, they seemed to kind of, I don't know, they're not spinning as well anymore, but oh well, I got another set of bearings. I'll be sweet, I'll probably clean them up, put them in another board or something, but yeah. If you guys are new to my channel, make sure you hit that subscribe button, leave a thumbs up, drop me a comment below, make sure you follow me on Instagram, at anacism, to keep up to date with what I'm doing, but yeah, shouts out to all the new subscribers, Rode 20K, hopefully I'll see all you guys in the next video. Cheers for watching.