 Hey guys, it's Jen from Minecraft. Today I'm going to show you how to turn these ordinary wine glasses into something extraordinary. I'm going to show you how to glitter them and how to put vinyl on them very easily. Okay, so for my wine glasses, I'm going to be using these SVG files. I found these SVG files in design bundles. I will leave the link below if you're interested in them. I thought they were pretty cute. It came with a whole bunch of them for, I think, $4 or something. So not too bad. So I downloaded these into my design space and these are the ones that I'm going to be using. The one with this one, the love, I would have liked it if they would have kept the heart that I could ungroup it, but you can see here you cannot. So I'm going to leave this one the way it is. And I think with the be mine one, I'm just going to change the color of the heart. I'm going to change it all. I'm going to change the color of the be and the mine and then the heart. So I have it selected. I'm going to go to ungroup and then I'm going to see what they grouped together. So they did the be and the mine. So I'm going to select both of these. I'm actually going to hold down the control and then I'm going to click on the mine. So it selects both of the be and the mine and then I'm going to attach it. Oops. I just noticed that it didn't do the little eye here. So I will show you. If I move this, it does everything but the little eye, so I'm going to do the same thing. I'm going to push the control button, click on the, whoops, I'm going to click out. I'm going to click on the little eye first. Maybe it'll give me it. So I'm going to look for it on the side over here. This little dot here is the eye. So I have that selected. I'm going to push the control button and I'm going to click on the be and the mine. So the mine is already attached. I'm just going to attach a little dot to it. So it attached everything but the heart. And the reason I did that is because I want the be mine to be a different color than the heart. So I'm going to do the be mine a pink color. So I'm going to click on the color panel up here. I'm just going to put pink and then I'm going to take the heart and I want to change that to red. So this one is finished. So I'm going to do the next one with the XOXO y'all. So I'm going to actually change the X's and the O's to pink. So I'm going to click out and see actually click in it and ungroup it and see what all is attached on here. You can see in the side panel here what is all here. First you can see the all is connected but the y is not. So I'm going to do the same thing. I'm going to click out. So I'm going to click the y and then I'm going to hold down control and click on the all. So that's going to give me this whole thing the y all. So it's y'all here. So I'm going to attach those two words or those letters together and that's going to cut it out as one. And with the X's and the O's I want them to be separate. So I'm going to make the X's a red color so I'm going to do the same thing. Click on the X and then hold down control and click on the other X. And I'm going to attach those two and that is going to just attach these two. I'll show you quickly. See just the X's are together which is what I want. And then I will do the same thing for those. I'm going to click out. I'm going to click on the O. Oops. I don't want that part. I want the O. And then I'm going to click and hold down the control button. And it'll give me both of the O's together and the same thing. Attach it. And the reason I'm doing that is because when I cut this out I want it to be spaced properly. Just makes it easier for me when I'm putting vinyl on my glasses. So as you can see the X's and the O's are together. I mean sorry the X's are together and then also the O's are together. So I can change the color on them and not have to do it one by one so I'm clicking on the X. I'm going to change it to a red color. And then I'm going to click out and I'm going to click on the O and then I'm going to change it to this pink color that I have too. The y'all down here to the pink as well. So I'm going to click on that one and change it to the pink. And then one last thing down here is this love. Again I cannot do anything with it's already attached so I'm just going to change the color. So I'm going to go to the color box up here and change it to red. And one last thing I want to do is I'm going to select just the B mine here. And I'm going to change the size of this. So I'm going to try three by three and see how that looks. I'm going to stretch it out a little bit. You've got to go on how large your glass is. You want to measure it before you cut this out. So I'm going to do the same thing with the XO Y'all. And it's already unlocked for me so I'm going to change it to three by three again. And see what that looks like. So this is a little together for me so I think I'm just going to stretch it up a little bit. I like to have a size in mine that I'm going to use and then kind of go from there. So I have the last one selected. I'm going to go to the unlock and then change it to a three by three again. I like it too much. I'm going to just make it a little different. So I like everything the way it is so I'm just going to go to make it and I will show you what it looks like on my mat. So here it is. The X's are together. So I can cut them out however. I'm going to move them over a little bit actually to save some of my vinyl on here. I want just enough room that I can cut underneath here. And then I always separate so I'll move him over just a little bit. See if maybe we can get... Okay I'm going to put him in there so I'm not wasting too much vinyl. Then I'm going to go to the pink and see what that one looks like. So I'll move. Maybe we'll just need to always over. Perfect. So then they won't be wasting too much vinyl with this but this is how it's going to cut out. So I will cut this out. I will weed it out and then I'll show you the next part with the glasses. It's actually a lot of fun to use the glitter. It does get a little messy but I will show you how to do those. Alright so here are the supplies that you are going to need. I purchased these wine glasses from Walmart but I also have these that I purchased from the dollar store as well. Here's a little bit bigger and a little bit longer and I just like to work with these ones a little bit more so you can buy them at the dollar store if you want or you can get them off of Walmart. Then I have my files that I had cut and weeded out. I have my glitter that I purchased from Walmart as well but you can get that at Dollar Tree. I have some electrical tape and I'll show you why in a minute. I have a few paint brushes and some foam brushes. I have a black dry erase marker, some scissors on the side over here and then my Mod Podge. The first thing that you're going to do before you even get started is getting your wine glasses. So I'm just going to take a paper towel and then just go around and you get all the little pieces and little pieces of hair and little dust or whatever might be on your wine cups. So I'm just going to do that really quick to all four of them and you also want to make sure that you get the bottom too because if you're going to be putting the glitter there you want everything to be clean. So do the tops and the bottoms. So the next step for this is to figure out where on your cup you want the glitter to be. I know I'm going to do the bottom part I want that to be glitter and then I'm going to do a little bit on the top here actually on the bottom here. So this is where the marker comes in handy where you just take it and you find something that's the right height of whatever you're going to be doing. So for this for my project I found out that my glitter is actually the right height that I want. So I'm going to take my glitter put it flat and I'm going to take my pen and I'm going to hold it flat against the glitter and then I'm just going to turn my wine cup as I go and that gives me a straight line. And the reason I'm using a dry erase marker is you could easily wash it off so I'm not going to put much glitter on here so I'm going to put the tape around the top and then I'm also going to tape the bottom here because I just want the bottom part. I don't want any of the stem to be have glitter on it so I'm going to put a piece of tape here three pieces of tape one here one here and then one down at the bottom. I'm going to do that for the next couple of glasses so again just lay it flat hold the marker flat and then just turn and then you get a straight line every time and then the reason why they use the markers because you can wash it off really easily so I'm going to quickly finish these so now that I have this done this is where the electrical tape comes in. So I'm just going to take a piece of tape and then I'm going to flip my mug upside down and you need to figure out where you want to put your tape so since I know I'm doing the bottom glitter I want the tape to go on top so I'm going to flip it upside down and then just follow my line that I had just made with the marker and it's so much easier with this electrical tape because it's very flexible so you can pick it up and kind of go along. You want to try to get above your line just a little bit so that when you want to erase it you won't see it later on once you put your glitter on just take your time go around the edge just try to get it a little bit underneath your line and if you don't that's okay you can always wipe it off later but it just makes it easier if you can do it all at once so there it is and then I just leave some extra and put it down on the side so that when I want to pull it off I can easily pull it off so I'm going to put one more piece here so I just want this part glittered and then just do the same thing this one does not have a line on it so you just got to go with the curve of the cup itself and I just want the stem part so I'm just going to make this a little bit shorter I'm just going to take it kind of eyeball it but you want it to be as straight as possible because that is where your glitter is going to lie you want a straight and then I always give it just a little bit of just give it a little tail on the end so I can easily pick it up later and then one more spot it depends you don't have to do all this if you don't want to I know I want it glittered here and then I also want the bottom glittered so you don't have to do this whole process but this is just what I'm doing so I'm going to take my extra piece that I cut off and then just do the same thing for the bottom part again I just give it a little bit of a tail so it's easier to take off later so that is finished so the next part you're going to want to do take a cover or take a paper plate whatever you have on hand to put your Mod Podge on I just have this little cover that I use over and over again and then I purchased this huge thing of Mod Podge because I go through it a lot at Walmart so I'm going to shake it up just a little bit and I'm just going to add a little bit of Mod Podge to that top of that container and I will tell you this does get a little bit messy it's fun to do with kids but it also gets messy when you start using the glitter so I have some Mod Podge on here and then I'm going to take my foam brush and I'm just going to go over actually you know what before I do that I'm going to take my towel that I used before and just go over my cup and get that black line off and again you might have a little bit afterwards when you put your glitter on which is okay you just got to work carefully with it so I did the best I could and just took the rest of the mark rough and make sure it's dry then you take your foam brush you just take your Mod Podge and you put it on wherever you want your glitter to be because your Mod Podge is basically your glue so wherever you put your Mod Podge is where your glitter is going to stick so you want to make sure you put enough on but you don't want to put too much on so I'm just going around going all over making sure I get really close to where the tape begins and ends and then once I have it on I like to just go over it with a straight line make sure you didn't miss anywhere and they make sure I didn't put too much in one spot so kind of just work around make sure I get a nice even line everywhere so once you have it where you want it I'm going to move this away and then I'm going to take a piece of parchment paper that I had cut out move all this away take a piece of the parchment paper and then I'm going to work with the glitter so you have to figure out what color glitter you want to use I'm going to use this pink color I don't know how well it shows up it's just a pink color and then I will open it and then I'm just going to hold it kind of upside down and go all over with the glitter this is where the parchment paper comes in so don't waste any glitter just go all over kind of like hit it and tap it just a little bit make sure you get it everywhere if you miss the first time it's okay because you're gonna have to put a couple of coats on here so I will just continue to keep going around a little bit and depending on what color you use for your glitter is really how many times you're gonna have to do it the darker colors I noticed stay on really well and these lighter colors are kind of harder so and this is where it comes in where you want to make sure your lines are very straight and you have the same amount of Mod Podge all over because you will see it a little bit if you have large lines so I'm gonna let this part sit I will work with the next part I think I'm gonna keep it pink as well so I'm gonna leave the glitter that's down there ready and then just work on the bottom part it's the same process just take your Mod Podge and you just put it on you want to try not to get it on the bottom of this because you really don't want to have glitter on the bottom of your cup maybe you do but I don't but you also want to make sure you get the edges really well so that the adheres to the side of it so maybe if you want to even just run your brush around but just again carefully go over make sure you get it everywhere if you miss a spot that's okay because you're gonna be doing a couple of coats on this and I'm just gonna go over again carefully and try to make straight lines and then see if I missed anywhere and once you think you get it just take your glitter and do the same thing all over tap as you go this is why I said it gets kind of messy so you got to be careful make sure you have something underneath it to catch it because you don't want to waste it either so once you think you have it all done I'm gonna tap it a few times make sure I get the excess off and I'll put it to the side then I'll take my parchment paper and my glitter box and then I'll just pour it back in so you're not wasting anything you do the same thing if you're gonna use the same color or you can use another piece of parchment paper and keep going I'm actually going to switch it up and work on another one but I'm gonna do the same process and I'll guess for this you don't have to watch me but I already have the line on here so I'm gonna take my tape and go around the edges and I'm not sure if I want to do the bottom or not that's all up to you how your preference preferences and how you want to do it I'll maybe just see how it looks with just the top but I want to do at least two the same so you know there's a pair of them so I'm gonna do this really quick and show you what that looks like okay so I finished with those two I'm gonna make sure I close my cover and here is how it turned out it's gonna need at least one you know maybe two more coats on here so you know I'm gonna let this dry probably for a few hours and then I'm gonna come back and I'm gonna put Mod Podge on it again and do the same thing over again and put the glitter on it probably like I said maybe two or three more times I will show you that process and then when it is finished you want to do one more layer of Mod Podge and that's gonna seal everything for you this is will not be dishwasher safe I use the just the regular Mod Podge the matte kind and these there is a dishwasher safe one but honestly I don't trust that so I just tell people if I sell these I just tell them hand wash only you know so you don't have the risk of the glitter coming off so this is finished I'm gonna do the next two really quick I think I'm gonna use red for the next two but I will show you how those turn out okay so a couple things that I forgot to mention so here's the red one that I did but upon finishing this one I remembered from the first time I did these you want to take the electrical tape off after you are done putting on the glitter do not want it to dry and if you do let it dry you have the risk of pulling off the glitter with the Mod Podge if you let it dry so I'm going to carefully pull this off while it's still wet and another thing that I also forgot to mention was you can see inside you can see the lines but I don't know if you can tell that where the lines are is more where it's white if you finish your first layer and you notice that there are white streaks anywhere that would be from the Mod Podge and it would dry it will dry so if you can see all this all the lines and everything that is your Mod Podge it will dry clear you will not see those and by the time you put the second and third coat on you won't see it anyway so there's the pink one here's the red one I did I chose not to do the bottom just because I think it's easier if you're drinking something not to touch the bottom so again I'm just gonna take off the tape while it is still wet the next part is a little bit trickier because you don't have the tape to go off of where your lines are but it's really not as difficult as it sounds you just take your brush and then really gently go around so here is this one and if you have extra as you can see there I just have an extra brush and I just go around and pull that off so it doesn't matter right now that would be the last part that you would do but sometimes you can see the black line I don't know if that's showing up on here but you can just easily go around and wipe that off but again you're gonna be putting more coats on here so I'm not worried about that right now so I'm gonna let these dry for a couple hours until you notice that it's not white anymore in the middle and then it's it's dry to the touch as well so I'm gonna wait a few hours for these to finish and then I will show you the next step okay so I let my cup sit overnight it turned out really well you can see the whiteness has gone inside the only thing that you see left is the glitter you need more glitter on here obviously or I need more glitter on it and here are the pink ones with the stems the bottom part done so since I have my tape already pulled off this process is a little bit more tedious but it's the same thing you're gonna take your brush put a little bit of Mod Podge on and you want to go a little bit more careful this time you want to just follow the line at the top and you remember wherever you put your Mod Podge is where your glitter is going to go so you want to be careful and just follow that line and just take your time it's not a rush and then for the last part you just do the same process you're gonna want to just do let this you put your glitter on and then you're gonna let it dry and then you do the same process you put your glitter on it and then if that is enough if two layers is enough for you great but if it's not you just do the same thing put your Mod Podge on and put your glitter on but the last process for this whole thing is just this so let's say I did another coat of glitter and then another coat of glitter and I like the way it looked you want to put a layer of Mod Podge on and when it looks white it's okay once it dries it'll dry clear so once it's finished it'll look like this so I'm gonna put another layer of glitter on here I'm gonna let it dry I'm gonna see how it looks if it needs another layer I'll do another layer if it's finished I will do just like this and it will be done so I'm gonna finish this up and then I'll show you this is the last part to my cups so last night I finished putting the second layer on and then I also put the Mod Podge on so it is hard to the touch there is no glitter that's coming off so I did it with both all the cups the pink and the red and I'll be honest I do not like this pink one I wish I would have done them all red so it's all up to you what color you want to do it but that is how you do it so for the last part I'm going to be using my SVG files and putting them on my cups so I have them here I just had to figure out these ones go together and then this heart is separate so we will start with this Be Mine one and I just have some transfer tape and I'm just gonna put it on here making sure this piece will fit there and then just peel back your transfer tape and put it on your file and then I like to take a squeegee one of these tools and just kind of scrape it so it sticks to the transfer tape really well and I pull it back backwards and then here it is so what I like to do when I have a curved surface is just make little cuts in it just so it curves a little bit nicer on to the surface you don't have to do this it's just your preference on what you want to do and I'm gonna take off this extra piece here because we don't need that then I'll just get in the way anyway so we're just gonna make some more cuts in here quick and then figure out which one I want this on I really like these red cups so I'm going to use one of them and you want to just put it on high enough it's not gonna go on your glitter kind of center it as you go and again this is where the cuts come in so that it lies nicely on to your surface makes it a lot easier to get them flat so push really hard to make sure you get it on and then when you're ready to go back your transfer tape there you go this one says be mine and I believe this one had the heart on it so I'm gonna find that heart that I just had here it is and I'm not even gonna use a piece of transfer tape I'm just gonna peel it off myself and then I'll place it wherever I want to put it so I'll put it right here so there we go there's the first one being mine and again it's hard to the touch it's not gonna come off you just want to make sure you do not put these in the dishwasher these will be hand washed especially because of the vinyl that cannot be washed so I'm done with that one and I'm gonna work on the next one so I have a love if I can pick it up I have a loved one and then I have an exo exo y'all one so I think I'm gonna put the loved one on this other red one and then there's the second one there whoops there is a little bubble in this guy sometimes that happens but if it does you can just take like tweezers and pull it up a little bit maybe your fingernail and then just lay it back down again so that stays nice and flat again it's handmade nothing's perfect but you want to do the best job if you're gonna be selling this or giving it away as a present but there is the second one so I'm gonna do the next with this the same process with the next two and then I'll show you how those turn out I love how these wine glasses turned out they were quite easy to make but a little time-consuming but a lot of fun to create if you liked this video please give me a thumbs up and hit that subscribe button if you haven't already thanks for watching