 For the circuit python parsec today I wanted to show you how to use the circuit playground library to easily access the capacitive touch sensors that are on the circuit playground blue fruit or the circuit playground express. So what you can see here we have a bunch of these capacitive touch pads seven of these in fact are capacitive touch pads. When I touch this pad it just prints out touched pad A1 and the way this works I have time imported just to help with sort of debouncing and then I just have this one library from Adafruit Circuit Playground Import CP that's the circuit playground library then my main loop while true if CP dot touch underscore A1 that's that A1 pad has been touched then we're gonna print and we're gonna put a little delay in there. So now what's gonna happen is any of these capacitive touch pads when I touch them are going to light up one of the neopixels next to them and then turn off any previous ones that I had lit. So there is the A4 the A5 the RX the TX A1 A2 and A3. So those are all seven of the touch pads on there and it works just the same as the simple example I'm importing time I'm importing Adafruit Circuit Playground then CP pixels brightness I'm setting to 0.05 keep it keep it low and then in my main loop each of these pads works the same way if CP touch A1 A2 A3 and so on then we go ahead and turn all the other pixels off in fact we turn off all the pixels across the board then we just light up the single one that we want and we use a little time there for debouncing. So one of the neat things here is that you can get little patterns going because it is running through has little 0.1 second delay and then checks for the next pad so we can in fact get them all going at once if we want that should be all seven of them there which is a lot of fun you can see I'm also printing out to the display there and so that is how you can use the capacitive touch sensors on Circuit Playground Bluefruit and Circuit Playground Express inside of Circuit Python using the Circuit Playground Library and that is your Circuit Python parsec