 Hey everyone, Shaber1000 here today. We got a brake light out, so I'm going to show you how to change its real simple four screws. Let's go ahead and change this so she don't get a ticket. Okay guys, so a little bit of cracking there. I've never since we've been together, four and a half years, I've never had to put any tail light bulbs or anything in this truck. So you know, I've had to do headlights and front turn signal bulbs, but I haven't had to change any in the back, so they last a long time. They're not LEDs, they're just a double filament bulb. Just one of these. That's all it is, so this is the turn signal, this is your reverse lights, this is your brake and tail lights. And I know a lot of you guys already know that, but some of you might not, but I noticed brake light when I backed the boat off the trailer and she was taking the truck up to park it, truck and trailer up to park it. I noticed this brake light was out, so I figured for a $3 bulb, it's no sense in getting a $150 ticket. So it's going to be this bottom one, which is right down here, I don't know what you can see and what you can't. Right here, right there. So should just be able to, that's been in here, the problem might be original, I don't know. Let's see, does this come out? Yeah, sometimes these will come out, there we go. Alright, so it's the bottom bulb here. You push in and turn a quarter turn counterclockwise. See how dark it is? So, now you're, there's a certain way these go, like that, these little ears, just look in there, one will be down farther than the other one, so it'll go like this. And you push it in and turn it a quarter turn, same way if you take it back out. Okay, so when you take it out, you push it in and turn it counterclockwise, well probably not even a quarter turn, but, and when you put it back in, in, just till it clicks, there we go. Now, let's check and make sure our lights are working. Okay, so our tail light is working, now I got to somehow put my foot on the brake and look at the camera. Okay, cool, so good to go. So, these 2003s, some of them you got to take the socket out, but this one apparently you don't have to, so just make sure you get your seal in there, put that on there, and put your screws back in. Really simple work. So I just thought I'd share that with you guys, for those of you that don't know how to do it. Sometimes, these are kind of, there you go, you got to look in here, there's a little plastic square piece, make sure your screw goes in the center of that, and what I do is I start them that way, if I got to pull it back a little bit and see, I can. Usually once you get two in, you're good to go, oops, guess what, this one takes a long one, I forgot to mention that, see, two long ones and two short ones. The long ones will go on this side, and the short ones will go on that side. And get it started, make sure it's getting into the plastic part, and there you go. Really simple. Now, I've always got a couple little tools, I got a straight screwdriver, and a Phillips screwdriver, a couple hand wrenches, some pliers, I got like a little tool kit, a couple sockets, and a couple ratchets, so I got this extra one, I'm going to keep in the tool box of the truck, that way if we're out somewhere, I don't have to go stop and buy one, I can just pull into a gas station or whatever, and change it, finish tightening these up, all done. Hi guys, so there's how you change a tail light bulb in a 2003 Toyota Tacoma. It's like, from the late 90s into 2004, 2005, they're all pretty much the same like this, a lot of different vehicles, Ford Chevy's, some of them you'll have, I'll show you here real quick. Now some tail lights, to take the lens out, you'll have a couple screws over here, and then you'll go inside here, somewhere, you know, just look at it and you'll see, just take them screws out, and you should be good to go. So there you guys go, appreciate you watching, and I'm going to say, shea bearer the myth man legend gone for now, hot one, there that's good enough, we'll see you soon, bye bye and take care.