 Hello, this is Nick from Laptop Media and today we will show you how to open the 2024 version of the ASUS Tough Gaming F16, FX607. To open this machine you need to undo 12 Phillips head screws. The one in the lower right corner is captive and it'll slightly lift the panel up and you can start the prying process from there. Then pop the sides and the back. The inside of the bottom plate houses dust filters for the fans and many plastic elements for better internal structural support. The battery here is a 90 watt hour variant. To take it out, detach the connector from the main board and undo the three Phillips head screws that keep the unit in place. The capacity is enough for around 20 hours of web browsing or 8 hours of video playback. That's a tremendously good result for a gaming device. To achieve that, you have to apply the balanced preset in the Windows power and battery menu and select the performance mode in the Armory Crate app. There apply the eco mode to use the IGPU as well as the panel power saver function. In addition, the DC fan operation mode is set to Windows preset. You also may turn off the AI noise cancelling for the speaker and microphone. The memory section is covered with a foil. According to ASUS, the two SODIMS can handle up to 32GB of DDR5, 4800 MHz RAM in dual channel mode. However, since the CPU can support up to 192GB, this laptop likely wouldn't have issues running a larger amount of memory than the official manufacturer's specified limit. For storage, there are two M.2 slots for Gen4 SSDs. The thermal system with two arc flow fans comprises five heat pipes, four heat sinks, and two heat spreaders. The chipset is additionally cooled by a small metal plate.