 Hey guys, Shebaer1000 here, gonna do a little vlogging with you today, it's Tuesday, gotta give the doctor tomorrow, so I can't do anything real stressful today, so thought I'd hang out with you guys today, uh, get this light here, or porch light, um, it is a motion light, but it's kind of weird, at night time it kicks on, but it's like a light glow, and then when it catches movement, it kicks on full brightness, uh, since she washed the house down the other day, it hasn't worked, so I mean, it's an outside light, I can't see water getting in there, it could have, but I don't think it popped a breaker, because everything else is working on that circuit, so I'm just gonna try, I don't know, she says she thought it takes a different kind of bulb, but I'm gonna try a bulb in it, and see what happens, um, this is a crystal clear 100 watt bulb, I think we bought these ones for her, um, easy bake oven, but let's get the top off of this, every time we kick the camera on, let's get the top off this and change bulb, see what we'll kick it on, and see what happens, I'll see if I can like, cut my hands over it, you know, to get it to kick on, but I got it turned off right now, I didn't put this light up here, I don't know who did, but it isn't right, I mean it's okay, but it's just not, uh, you know, just, I don't like things like that, you know what I mean, so, so I'm thinking it's just a bulb, a little bit of dirt in there, but if it's not, that'll give us something to do, figure out why this thing's not working, and we'll flip the switcher on, try to cover it up, usually they'll kick on if you, I think this is the motion sensor, I think down here's for the light, but I may have to get my, we may have to take this off and see what's going on with it, so I mean this looks like it was burnt a little bit, it's real black down there, but I don't hear anything in it, so I guess I'm gonna take this other bulb, I'm gonna try it in a lamp or a light in the house, and then we'll come back out and we'll take this down and see if we got powered to the light itself, I'll check out with my voltmeter, ain't gotta let me grab some stuff, okay guys, so I checked that light out, in the garage the bulb was good, make sure it's power's off, so let's take this down, like I said everything else on that circuit is working, there's a damn lizard under there, go on, get out of there, okay, so there's another one, scared me, he's missing a tail, all right, so that could be an issue, see that should be the ground, what's going on here, you gotta see that alright, there's the ground, now let's, I've got my volt-ohm meter here, this is cool, this thing here, it's also, it's mostly for a car, you got tack and well meter, you got your dwell for your two-cylinder, three, four, five, six and eight, it also does temperatures and it does your RPM, there's your tack, so what I want to do is I'm gonna set it on volts, I'll flip this on, I want to check see if we got voltage, so it's got a nice little stand with it that you can use, it's got a little, you got a nice stand, not a place you can put your wires, pretty cool, so let's see if I can hang this, you guys can see it too, okay so we're getting power to the light, I don't know if you can see that, it's right around 121 to 124 volts, so we are getting power to it, so I guess the next thing to do is we're gonna take this off, we're gonna take it to the house and see if we can dismantle it, find out what's going on inside there, I don't know if the if the sensor went bad, let me shut this off, right under here is the sensor right there and it's looking pretty gritty, so let's go ahead, I want to take this down all I want to do is, you know, I'm not sure what the red wire is for, but it is not being used, so this one's already disconnected, this is the ground, before I take it in, I'm gonna knock all this junk out of here, okay, and then I'll kick it back on when we get into the garage, we'll get it up on the bench and work on it, so I wanted to show you what came out of this light right here, it's a lizard egg, see it, it's been hatched, see that, lizard egg, okay, back to the task at hand, okay guys, we're in the garage now, go ahead and take, this is your sensitivity here, which it was all the way up like that, which kind of, every once in a while, not every car that went past, but some some vehicles that would go past, I don't know if it picked up, picked up their headlights or what, but if a car, like I would come out to smoke cigarette and the light would be on, and I'd roll back the footage on the security cams and it would just be a car going past our truck, whenever, you know, not all of them, but every once in a while, a vehicle would go past and this thing would kick on, so, but she thinks she may have water damaged it, which is possible, but she's washed the house down before and never had an issue with it, like this before, but that eye right there on the bottom, looks like it's, this is the motion, this is the eye for the light, I don't know if you guys can see that, it doesn't look great, let's take this off, see if we see anything burnt in here, but the issue is that it wasn't on because it was daytime, but you gotta think there was still power going to it, because we never shut the switch off, right, so sometimes you can see water damage, I mean it's going to get a little water in it, these things are water resistant and all waterproof, get this out of here, a little tiny stuff down in here, looks like maybe right here, see that, right there, see if I got any alcohol, I don't know if I got any alcohol, I got some peroxide, but let's go ahead and take this out, I mean it's already broke, I don't know a lot about this stuff guys, but I do know how it works, which helps a lot, but they don't know what makes what do what, you know what I mean, I'm just a just a redneck from Granger County Ohio, you know, down these things, already not working, what's the worst we can do, make it not work worse, no, you know it just, there's, there's the sensor, this is the, this is the eye here, the motion sensor's right here, this is for your light and dark, which if it was a motion sensor wouldn't be no problem, because I'm pretty confident I can put one in it because I've got one, but I don't have a light sensor, which is right there, I don't know if it's got a bypass that you can just see right here, I know it's set down off, it says hours, so you can go three hours, six hours, dusk to dawn, and it's set on dusk to dawn, this over here is the minutes, it does have a test on it, I can probably maybe switch it, see these switches don't want to move, I'm gonna say maybe switch it over to test and just flip the light on and off until we got another one, these things are expensive guys to get this out of there, I've ever had one of these apart, just gonna say I don't see any more screws, there's a screw right here, my smaller, now these, these purple things down in here are capacitors, if they blow, like the top of them would like be, be domed over and these all look good, so the caps, I think these yeah, these capacitors are all good, what I'm saying, but a dusk to dawn thing, this one, here's 10 minutes, one minute, and there's test, so I guess what we could do, turn there damn it, you ever get the feeling you should just leave things alone and buy new, before you get bitten up around down in there, okay, so I guess I'm gonna take this outside, I'm gonna hook it back up real quick, kicking on during test and if then, if that works then maybe I'll try to clean some of this up, I don't think I've got any alcohol, I have used peroxide but it doesn't dry up as fast as alcohol, so there's the light bulb that came out of it, which we know is good because I tested it in here, let me take this outside and see if that, if that worked or not, okay guys so this is the issue right here, the one that had all the green stuff on it, okay, so I scraped it off but it's not gonna work, getting power on one side but not on the other, so what we're gonna do, until we can get another light, let me back you out here, I'll show you what we're gonna do, we're just gonna run it as a normal light, I'm gonna clip these off right here, that'll do away with this thing since this is no good anymore, now we were getting power to the sensor, okay, but I know what you're thinking is yes I can solder them two together and work all the time but I don't like doing that, I can just clip these off right here and I'll trim those back and we'll just run it as a regular porch light, clean it up a little bit and I'll just run it as a regular porch light until we can get another one, so these are pretty expensive so it could be a little bit but that's the issue, she was right, it is water damaged but it's not her fault, that's not just from one time, I mean we got hard water yeah but that's that's from overtime, excuse me overtime, you get condensation in it and stuff like that, it can't be helped it's an outside light, all right so let me get this cleaned up and we'll take it outside and put it on, we're back let's get this thing hooked up and see if it works as a regular light, now I do not have the circuit breaker off, I know that but this is just a light, so I just got the switch off, there's no power going to this, I'm here by myself I know no one is going to turn the switch on on me, okay so but if somebody's in the house let them know what you're doing, put a piece of tape over the switch, keep people away from it, because if I shut the breaker off it's going to do the same thing this switch just did, I'm going to be out here working on it, no power going to it, it's the same thing, a lot of guys will disagree with that and that's fine, but I myself just turned the damn switch off and it does the same thing see this ain't the right mount for this light, so that's why it turns like it does, all right I did like I said I didn't put this light up, but when she got the house you know she had nobody, she had to rely on whoever she could get to help her out or pay to do these things, well then they just do them half fast just okay it looks good you know just don't touch it that's okay she has done a lot of work in this house and when we got together the doorbell wouldn't work, so I got the doorbell working for her, it works fine, it lights up maybe I can get this a little tighter right now, now let's back you out, whoops I set out, you ready let's see if this light works now, there we go a lot of people that just threw the whole light away, that'll work you know when we let Bruno out we can flip the light on, this is only a what is it 60 watt bulb I think, so we probably just turn it on at night and leave the damn thing on, so she feels more comfortable the only thing is like if we go somewhere it gets dark come back the light won't kick on force, but that's okay at least we have a porch light if somebody has to knock on the door whatever we can turn the light on look out the window before we open the door, you know which I don't do that I just open the damn door probably shouldn't but so anyway so that's we did clean it up a little bit but so it does work now it's just not motion activated it doesn't doesn't have the timer it's not light activated so at least we have something till we get a new one let's try to find I want to charge you guys up and try to find another project we can do I just like I said I can't do a whole lot because I gotta go to the doctor tomorrow so so anyway let's find another project to do just an easy quick project okay I just hose this off let's see if it'll fire up real quick did off so find something else to do okay guys we're in the backyard I'm gonna kind of do an old start I can't do a cold start because it's not really cold it's like 77 degrees so we'll do an old start on this simplicity track or see if we can get it to start up I just put some gas in it so let's see what happens good sign the gas up might take it a minute to pump up some fuel up now I can see it in the fuel filter there I smell some that battery was cooking I think the battery pod let's take it for a little ride around the yard with the carburetor maybe flatten out a little bit I did pull the head off this thing it did have a valve that wasn't closing all the way had a piece of carbon under it I'm gonna go ahead and put this on a slow charge and put it on two amp and I'm gonna let this battery charge for a while I flipped it on the 200 amp to boost it so these weed eaters run mine you guys heard it run these two will run they just need lines primer bulb crap like that and they'll run so I need to get them going here pretty soon now I don't know why someone has got this one look at it they got it on upside down so I don't know what what the deal is with that but I need to get I want to keep this one the other two will be for sale those are cheap they'll be like that one will be like a $25 one this one will be a $20 $15 $20 one so there you go and you can see I need to get some weed weed eating done so I thought I wasn't recording yeah you guys saw this trailer man I gotta get started on it I got the chipper out front for sale I gotta get started on this cut it down I'm only gonna make it like four feet wide maybe even three feet wide because this is never gonna be on the road other than behind the tractor so yeah I'll make it a hell I might might might meet it in the middle three and a half feet but something like that four feet still a little wide I think I probably just go three feet but yeah that's pretty cool once I get it you know it is what it is but we'll build we'll build a trailer out of it I'll probably take all this off I'll cut the center down first so it's five feet now I do believe anyway I'll I'll find the center here because this this is one piece here that one and that one right there is one piece kind of comes around and kind of see it up there and what I'll do is I'll find the center and I'll take like six inches off of each side bringing together and I don't think I'm gonna butt weld them that one I might be able to butt weld it and then weld it directly towards that this one I probably won't do that too this one here you know I'll probably put a piece of steel in between it and then weld it to give it some extra strength that one there because I'll be able to weld like right across the bottom the bottom there on the back and on the front on the bottom of the sides and then but but welded around so that'll be strong enough for that this one here I don't know might be able to butt weld it but we'll just have to see I may you know put a piece of angle on it and well it's just it's not gonna be hauling a whole lot of weight so we'll just have to see but it's definitely going to be about four feet we'll just have to see how wide it is once I cut it down and see how far out the tire stick that's just T. damn wide he was I think he was building it for pull behind his truck but you know there's no there's no springs you don't want to do that you know that thing to be bouncing all over fucking road behind a little tractor you know we're not gonna have to worry about it so all right well let's see what else we're gonna get into it okay guys just want to say thanks for hanging out with me and you know doing a little vlog and all that stuff like I said tomorrow got to go to Gainesville there's some filming I'm gonna do on the way back and I'll get that uploaded for you some some old buildings and stuff like that this clock I got a video coming up on that I think it may be the next video I want to talk about this clock in my next video and what's going to be going on with and what's going to be going on with that clock so you don't want to miss that one we're going to do some things to it I got some little LEDs we're going to put inside there that's I need to put some probably going to put some plexiglass in here and we're going to clean it up nice and maybe put some shellac or something on it and make it look real pretty so again thanks for hanging out with me and I got some food on cooking real slow for monkey she'll be home here in an hour or two so that way she'll have something hot to eat and I will say she better admit the man a legend I'm gone for now don't forget to comment give me a thumbs up subscribe if you already haven't and make sure you click the bell icon to get notified of more videos whenever upload videos like this so I got a hell of a playlist go check my playlists out and have a Shade Bear binge watch them all day long if you want so I don't know what's going on with that thing all right so thanks a lot guys bye bye have a good one